SN65MLVD200DR LVDS Transceiver Half Equivalent & Substitute Parts

Part Overview

The SN65MLVD200DR is a 1/1 transceiver half LVDS multipoint interface IC manufactured by Texas Instruments in an 8-SOIC surface mount package. This device operates at 100 Mbps data rate with a supply voltage range of 3V to 3.6V and supports operating temperatures from -40°C to 85°C. The SN65MLVD200DR is classified as "Not For New Designs," making identification of active equivalent parts essential for ongoing production and new design initiatives. Substitute parts must maintain identical electrical specifications, mechanical compatibility, and compliance certifications to ensure direct interchangeability in existing circuit implementations.

Key Parameters

Parameter	Specification
Manufacturer	Texas Instruments
Type	Transceiver
Protocol	LVDS, Multipoint
Number of Drivers/Receivers	1/1
Duplex	Half
Data Rate	100 Mbps
Receiver Hysteresis	25 mV
Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154", 3.90mm Width)
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitution of the SN65MLVD200DR is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

Protocol: LVDS, Multipoint
Number of Drivers/Receivers: 1/1 configuration
Duplex: Half duplex operation
Data Rate: 100 Mbps
Receiver Hysteresis: 25 mV
Supply Voltage Range: 3V ~ 3.6V
Operating Temperature Range: -40°C ~ 85°C

Mechanical Equivalence Criteria:

Package Type: 8-SOIC (0.154", 3.90mm Width)
Mounting Type: Surface Mount

Compliance Equivalence Criteria:

RoHS3 Compliance
REACH Unaffected Status
Moisture Sensitivity Level: 1 (Unlimited)

All substitute parts listed maintain identical specifications across these parameters. Substitution is valid only when all electrical, mechanical, and compliance criteria are matched.

Parameter Comparison

Part Number	Manufacturer	Product Status	Protocol	Drivers/Receivers	Data Rate	Supply Voltage	Operating Temp	Package	RoHS Status	Inventory (Pcs)
SN65MLVD200DR	Texas Instruments	Not For New Designs	LVDS, Multipoint	1/1	100 Mbps	3V ~ 3.6V	-40°C ~ 85°C	8-SOIC	ROHS3 Compliant	5483
SN65MLVD200ADR	Texas Instruments	Active	LVDS, Multipoint	1/1	100 Mbps	3V ~ 3.6V	-40°C ~ 85°C	8-SOIC	ROHS3 Compliant	1900
SN65MLVD204ADR	Texas Instruments	Active	LVDS, Multipoint	1/1	100 Mbps	3V ~ 3.6V	-40°C ~ 85°C	8-SOIC	ROHS3 Compliant	7723
SN65MLVD204DR	Texas Instruments	Not For New Designs	LVDS, Multipoint	1/1	100 Mbps	3V ~ 3.6V	-40°C ~ 85°C	8-SOIC	ROHS3 Compliant	3460

Engineering Selection Recommendations

For new design implementations, SN65MLVD200ADR is the preferred substitute, as it maintains Active product status with Texas Instruments while providing identical electrical and mechanical specifications to the SN65MLVD200DR. This part offers long-term availability and manufacturer support.

SN65MLVD204ADR is an alternative Active substitute that meets all parametric equivalence requirements. This part provides the highest current inventory availability (7723 units) and is suitable for applications where the SN65MLVD200ADR supply is constrained.

SN65MLVD204DR is classified as "Not For New Designs" and should be used only for legacy system maintenance or replacement applications where the original part number must be maintained in existing production runs.

All substitute parts carry identical RoHS3 compliance, REACH unaffected status, and MSL Level 1 ratings, ensuring regulatory and environmental compliance equivalence.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD200ADR be used as a direct replacement for SN65MLVD200DR?

A: Yes. Both parts are parametrically equivalent across all electrical specifications (LVDS multipoint protocol, 1/1 driver/receiver configuration, 100 Mbps data rate, 3V-3.6V supply, -40°C to 85°C operating range), mechanical packaging (8-SOIC), and compliance certifications (ROHS3, REACH unaffected, MSL 1). The primary difference is product status: SN65MLVD200ADR is Active, while SN65MLVD200DR is Not For New Designs.

Q: What is the difference between SN65MLVD200ADR and SN65MLVD204ADR?

A: Both parts are parametrically identical in all electrical and mechanical specifications. The difference lies in the base product number designation (65MLVD200 versus 65MLVD204). Both are Active products with identical supply voltage, data rate, operating temperature, and package specifications. Selection between these parts may be based on inventory availability or supplier preference.

Q: Are all substitute parts available in the same packaging format?

A: All listed substitute parts use the 8-SOIC (0.154", 3.90mm Width) surface mount package. SN65MLVD200ADR and SN65MLVD204ADR are available in Cut Tape (CT) and Digi-Reel packaging options, while SN65MLVD200DR and SN65MLVD204DR do not specify packaging format in the supplier device package designation.

Q: Do substitute parts meet the same compliance requirements?

A: Yes. All substitute parts listed carry ROHS3 compliance, REACH unaffected status, and Moisture Sensitivity Level 1 (Unlimited) ratings, ensuring equivalent regulatory and environmental compliance to the original SN65MLVD200DR.

Q: Which substitute part should be selected for new production designs?

A: SN65MLVD200ADR is recommended for new production designs due to its Active product status, ensuring long-term manufacturer support and availability. SN65MLVD204ADR is an alternative if supply constraints occur, as it maintains identical specifications and Active status with higher inventory availability.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message