SN65MLVD082DGGR Equivalent & Substitute Parts

Part Overview

The SN65MLVD082DGGR is an 8/8 transceiver half LVDS multipoint interface IC manufactured by Texas Instruments in a 64-TSSOP surface mount package. This device operates as a half-duplex LVDS transceiver with 8 drivers and 8 receivers, designed for low-voltage differential signaling applications requiring multipoint communication. The part is currently in active production status with ROHS3 compliance and is suitable for applications requiring reliable LVDS signal transmission at data rates up to 250 Mbps. Equivalent substitute parts are identified based on matching electrical specifications and mechanical compatibility to support procurement flexibility and supply chain continuity.

Substiute Parts

SN65MLVD082DGGR

Texas InstrumentsIn Stock: 2127SN65MLVD082DGGR Datasheet

Current PartRFQ

SN65MLVD080DGGR

Texas InstrumentsIn Stock: 17427SN65MLVD080DGGR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The SN65MLVD082DGGR has one identified parametric equivalent: the SN65MLVD080DGGR. Substitution eligibility is determined by the following critical parameters that must match exactly:

• Protocol: LVDS, Multipoint
• Number of Drivers/Receivers: 8/8
• Duplex Mode: Half
• Data Rate: 250 Mbps
• Receiver Hysteresis: 25 mV
• Supply Voltage Range: 3V ~ 3.6V
• Operating Temperature Range: -40°C ~ 85°C
• Package / Case: 64-TFSOP (0.240", 6.10mm Width)
• Mounting Type: Surface Mount

The SN65MLVD080DGGR meets all these criteria and is therefore a direct parametric equivalent. The primary difference between these parts is the packaging format: the main part is supplied in Cut Tape (CT) & Digi-Reel® format, while the substitute is available in Tape & Reel (TR) format. Both parts share identical electrical specifications and mechanical dimensions, making them functionally interchangeable in circuit design.

Parameter Comparison

Engineering Selection Recommendations

Both the SN65MLVD082DGGR and SN65MLVD080DGGR are active production parts with identical electrical and mechanical specifications. Selection between these parts should be based on packaging and supply requirements:

The SN65MLVD082DGGR in Cut Tape (CT) & Digi-Reel® format is suitable for applications requiring smaller order quantities or component-level procurement. The SN65MLVD080DGGR in Tape & Reel (TR) format is optimized for high-volume manufacturing and automated assembly processes. Both parts maintain ROHS3 compliance and identical MSL ratings, ensuring equivalent reliability and environmental performance in end-use applications. Selection should align with procurement volume, assembly methodology, and supply chain logistics rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can the SN65MLVD080DGGR be used as a direct replacement for the SN65MLVD082DGGR in circuit design?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including data rate, supply voltage, operating temperature range, and receiver hysteresis. The circuit design and PCB layout require no modification.

Q: What is the difference between Cut Tape (CT) & Digi-Reel® and Tape & Reel (TR) packaging?

A: Cut Tape format provides components on individual tape segments suitable for smaller quantities and manual or semi-automated assembly. Tape & Reel format supplies components on continuous reels optimized for high-speed automated pick-and-place assembly. Both formats contain the same component with identical specifications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance status, REACH unaffected designation, and MSL rating of 2 (1 Year). They meet the same regulatory and environmental standards.

Q: Which part should be selected for high-volume production?

A: The SN65MLVD080DGGR in Tape & Reel format is recommended for high-volume manufacturing due to compatibility with automated assembly equipment and cost efficiency at scale.

Q: Can these parts be mixed in the same assembly?

A: Yes. Since both parts are electrically and mechanically identical, they can be used interchangeably within the same design and assembly process. However, packaging format differences may require separate handling procedures during component receiving and storage.

Q: What is the significance of the base product number difference (65MLVD082 vs 65MLVD080)?

A: The base product number variation reflects different packaging and distribution channels managed by Texas Instruments. The core silicon and electrical performance are identical between these variants.