SN65MLVD048RGZR LVDS Multipoint Receiver Equivalent & Substitute Parts

Part Overview

The SN65MLVD048RGZR is an active LVDS (Low-Voltage Differential Signaling) multipoint receiver IC manufactured by Texas Instruments. This 48-pin VQFN surface mount device is designed for high-speed differential signal reception in multipoint network topologies. The device operates at 250 Mbps data rate with a 3V to 3.6V supply voltage range and is rated for industrial temperature environments from -40°C to 85°C. As an active product with full RoHS3 compliance and REACH unaffected status, substitute parts may be required due to inventory constraints, regional availability, or procurement lead time considerations.

Substiute Parts

SN65MLVD048RGZR

Texas InstrumentsIn Stock: 2741SN65MLVD048RGZR Datasheet

Current PartRFQ

SN65MLVD048RGZT

Texas InstrumentsIn Stock: 1404SN65MLVD048RGZT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SN65MLVD048RGZR is determined by strict equivalence across the following critical parameters:

Protocol and functionality: LVDS multipoint receiver architecture with identical 0/4 driver/receiver configuration Electrical performance: 250 Mbps data rate, 25 mV receiver hysteresis, 3V to 3.6V supply voltage Thermal and environmental: -40°C to 85°C operating temperature range Physical form factor: 48-VQFN (7x7) exposed pad surface mount package Regulatory compliance: ROHS3 compliant, REACH unaffected status

The substitute part SN65MLVD048RGZT meets all these criteria and is therefore a direct parametric equivalent. Both parts share the same base product number (65MLVD048) and differ only in packaging tape configuration (reel type designation).

Parameter Comparison

Engineering Selection Recommendations

Both the SN65MLVD048RGZR and SN65MLVD048RGZT are active products from Texas Instruments with identical electrical, thermal, and mechanical specifications. Selection between these parts should be based on:

Inventory availability and procurement lead times Packaging tape configuration requirements for automated assembly processes Regional supplier stock levels and delivery schedules Cost considerations where applicable

Both parts maintain full ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in all target applications. The MSL rating of 3 (168 hours) applies uniformly across both variants, requiring standard moisture control during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can SN65MLVD048RGZT be used as a direct replacement for SN65MLVD048RGZR?

A: Yes. Both parts are parametric equivalents with identical electrical performance, operating ranges, and package specifications. The difference lies only in tape reel configuration for component handling during manufacturing.

Q: What is the difference between the RGZR and RGZT designations?

A: These designations indicate different tape and reel packaging configurations used in automated pick-and-place assembly. The core IC die and electrical characteristics are identical. Selection depends on your assembly equipment compatibility and supplier availability.

Q: Are there any thermal or electrical performance differences between these parts?

A: No. Both parts operate at 250 Mbps, maintain 25 mV receiver hysteresis, and support the 3V to 3.6V supply voltage range across the -40°C to 85°C temperature range.

Q: Do both parts meet the same compliance standards?

A: Yes. Both SN65MLVD048RGZR and SN65MLVD048RGZT are ROHS3 compliant and REACH unaffected, with identical MSL ratings of 3 (168 hours).

Q: Can these parts be mixed in the same production batch?

A: Yes, provided your assembly process can accommodate both tape reel configurations. The finished PCB assemblies will be functionally identical.

Q: What should I verify before switching between these parts?

A: Confirm that your pick-and-place equipment supports the tape reel format of the substitute part. Verify component availability and lead times with your supplier. No electrical or thermal re-qualification is required.