SN65LVDS048APW LVDS Receiver Equivalent & Substitute Parts

Part Overview

The SN65LVDS048APW is an active LVDS (Low-Voltage Differential Signaling) receiver IC manufactured by Texas Instruments, housed in a 16-pin TSSOP package. This interface component functions as a 0/4 receiver, supporting high-speed differential signal transmission at 400 Mbps with a 3V to 3.6V supply voltage range. The device operates across the industrial temperature range of -40°C to 85°C and maintains ROHS3 compliance with unlimited moisture sensitivity rating (MSL 1).

Equivalent and substitute parts are necessary when the primary part faces supply constraints, extended lead times, or when alternative packaging formats better suit manufacturing requirements while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Part Number	SN65LVDS048APW
Manufacturer	Texas Instruments
Type	Receiver
Protocol	LVDS
Number of Drivers/Receivers	0/4
Data Rate	400 Mbps
Voltage Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package / Case	16-TSSOP (0.173", 4.40mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
MSL Rating	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the SN65LVDS048APW is determined by strict alignment of the following critical parameters:

Protocol: LVDS (mandatory match)
Receiver Configuration: 0/4 (mandatory match)
Voltage Supply Range: 3V ~ 3.6V (mandatory match)
Operating Temperature Range: -40°C ~ 85°C (mandatory match)
Package / Case: 16-TSSOP or equivalent footprint compatibility
Data Rate: 400 Mbps minimum (equal or higher acceptable)
RoHS & Compliance Status: ROHS3 Compliant (mandatory match)
MSL Rating: 1 (Unlimited) (mandatory match)

Substitute parts are grouped into two categories:

Category 1: Direct Electrical & Mechanical Equivalents (16-TSSOP Package) Parts that match all critical parameters including identical package format, enabling direct PCB-level substitution without layout modification.

Category 2: Functional Equivalents with Package Variation (16-SOIC Package) Parts that match all electrical specifications but utilize alternative surface-mount packaging, requiring PCB layout adjustment.

Parameter Comparison

Part Number	Manufacturer	Type	Protocol	Receivers	Data Rate	Supply Voltage	Temp Range	Package	RoHS	MSL
SN65LVDS048APW	Texas Instruments	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
DS90LV048ATMTC/NOPB	Texas Instruments	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
DS90LV048ATMTCX/NOPB	Texas Instruments	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
DS90LV048ATMX/NOPB	Texas Instruments	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-SOIC	ROHS3	1
ADN4668ARUZ-REEL7	Analog Devices Inc.	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
FIN1048MTCX	onsemi	Receiver	LVDS	0/4	400 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
MAX9121EUE+	Analog Devices Inc./Maxim Integrated	Receiver	LVDS	0/4	500 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1
MAX9121EUE+T	Analog Devices Inc./Maxim Integrated	Receiver	LVDS	0/4	500 Mbps	3V ~ 3.6V	-40°C ~ 85°C	16-TSSOP	ROHS3	1

Engineering Selection Recommendations

Direct Substitutes (16-TSSOP Package - No Layout Modification Required)

DS90LV048ATMTC/NOPB and DS90LV048ATMTCX/NOPB are Texas Instruments parts that provide identical electrical specifications and package format to the SN65LVDS048APW. Both maintain ROHS3 compliance and MSL 1 rating. The primary distinction is packaging format: ATMTC/NOPB is supplied in tube format, while ATMTCX/NOPB is available in cut tape and digi-reel format. Selection between these variants depends on procurement and assembly workflow requirements.

ADN4668ARUZ-REEL7 (Analog Devices Inc.) and FIN1048MTCX (onsemi) are functionally equivalent alternatives in 16-TSSOP packaging. Both meet all electrical and compliance requirements. These cross-manufacturer substitutes provide supply diversification when Texas Instruments parts face availability constraints.

MAX9121EUE+ and MAX9121EUE+T (Analog Devices Inc./Maxim Integrated) offer enhanced performance with 500 Mbps data rate capability, exceeding the 400 Mbps specification of the primary part. Both maintain identical package, voltage, temperature, and compliance parameters. These parts are suitable for applications requiring higher bandwidth margin or future performance headroom.

Alternative Package Option (16-SOIC - Layout Modification Required)

DS90LV048ATMX/NOPB is a Texas Instruments equivalent with identical electrical specifications but housed in 16-SOIC packaging (0.154", 3.90mm width versus 0.173", 4.40mm width for TSSOP). This option requires PCB footprint redesign and is applicable only when layout constraints or manufacturing process requirements favor SOIC over TSSOP format.

Frequently Asked Questions (FAQ)

Q: Can I substitute the SN65LVDS048APW with any of the listed parts without PCB modification?

A: Yes, for all parts listed except DS90LV048ATMX/NOPB. The DS90LV048ATMX/NOPB uses 16-SOIC packaging instead of 16-TSSOP, requiring PCB footprint redesign. All other substitutes maintain the identical 16-TSSOP package format and pin configuration.

Q: What is the difference between DS90LV048ATMTC/NOPB and DS90LV048ATMTCX/NOPB?

A: Both parts are electrically identical. The difference is packaging format: ATMTC/NOPB is supplied in tube packaging, while ATMTCX/NOPB is supplied in cut tape and digi-reel format. Selection depends on assembly line requirements and procurement preferences.

Q: Are the MAX9121EUE+ and MAX9121EUE+T interchangeable?

A: Electrically yes. Both are identical Analog Devices/Maxim Integrated parts with 500 Mbps capability. The difference is packaging: MAX9121EUE+ is supplied in tube format, while MAX9121EUE+T is supplied in tape and reel format. Choose based on assembly workflow requirements.

Q: Can I use MAX9121EUE+ as a direct replacement for SN65LVDS048APW?

A: Yes. The MAX9121EUE+ meets all electrical specifications of the SN65LVDS048APW and uses the same 16-TSSOP package. The higher 500 Mbps data rate provides additional performance margin without affecting compatibility at 400 Mbps operation.

Q: What does the NOPB suffix mean on Texas Instruments parts?

A: NOPB indicates "No Plumbum" (lead-free), confirming RoHS compliance. All listed substitutes carry this designation or equivalent RoHS3 compliance marking.

Q: Are cross-manufacturer substitutes (Analog Devices, onsemi) as reliable as Texas Instruments parts?

A: All listed substitutes meet identical ROHS3 compliance, MSL 1 rating, and electrical specifications. Selection between manufacturers should be based on supply availability, procurement agreements, and established qualification history within your organization.

Q: What is MSL 1 rating and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry this rating, ensuring no special storage or handling procedures are necessary prior to assembly.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message