SN65HVD09IDGGREP Equivalent & Substitute Parts

Part Overview

The SN65HVD09IDGGREP is a 9/9 transceiver half RS422/RS485 interface IC manufactured by Texas Instruments in a 56-TSSOP surface mount package. This component is classified as Active product status and is ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling direct replacement in applications where packaging format flexibility is acceptable.

Substiute Parts

SN65HVD09IDGGREP

Texas InstrumentsIn Stock: 784SN65HVD09IDGGREP Datasheet

Current PartRFQ

SN65HVD09DGGR

Texas InstrumentsIn Stock: 60373SN65HVD09DGGR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SN65HVD09IDGGREP is determined by strict equivalence across the following critical parameters:

• Base product number: 65HVD09
• Protocol support: RS422 and RS485
• Driver/receiver configuration: 9/9 half-duplex
• Receiver hysteresis: 45 mV
• Supply voltage range: 4.75V ~ 5.25V
• Operating temperature range: -40°C ~ 85°C
• Package type: 56-TFSOP
• Compliance: ROHS3, REACH Unaffected

The SN65HVD09DGGR meets all these criteria. The primary difference is packaging format: the main part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) & Digi-Reel® format. Both variants share identical electrical specifications and mechanical dimensions.

Parameter Comparison

Engineering Selection Recommendations

Both the SN65HVD09IDGGREP and SN65HVD09DGGR are Active product status components from Texas Instruments with identical electrical and mechanical specifications. Selection between these parts is determined by packaging and supply chain requirements rather than functional capability.

The SN65HVD09IDGGREP in Tape & Reel format is suitable for high-volume automated assembly operations. The SN65HVD09DGGR in Cut Tape & Digi-Reel® format accommodates lower-volume production runs or applications requiring flexible component sourcing. Both variants maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory alignment across applications.

Frequently Asked Questions (FAQ)

Q: Can SN65HVD09DGGR replace SN65HVD09IDGGREP in production?

A: Yes. Both parts share identical electrical specifications, driver/receiver configuration, protocol support, supply voltage range, operating temperature range, and package dimensions. The difference is packaging format only.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel (TR) format is optimized for high-speed automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® format provides flexibility for lower-volume production or component-level sourcing. Both formats contain identical components with the same performance characteristics.

Q: Are there any compliance or certification differences?

A: No. Both SN65HVD09IDGGREP and SN65HVD09DGGR are ROHS3 compliant and REACH Unaffected, with identical Moisture Sensitivity Level (MSL) ratings of 2 (1 Year).

Q: What are the critical parameters for RS422/RS485 transceiver substitution?

A: Critical parameters include protocol support (RS422, RS485), driver/receiver count (9/9), duplex mode (half), receiver hysteresis (45 mV), supply voltage range (4.75V ~ 5.25V), operating temperature range (-40°C ~ 85°C), and package type (56-TFSOP). All these parameters must match for direct substitution.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts have identical 56-TFSOP package dimensions (0.240", 6.10mm width) and surface mount configuration, enabling direct PCB footprint compatibility.