SMP-P-P-H-ST-TH2-PIN Equivalent & Substitute Parts

Part Overview

The SMP-P-P-H-ST-TH2-PIN is a 50 Ohm SMP connector plug manufactured by Samtec Inc., designed for through-hole solder termination applications. This male pin connector operates at frequencies up to 40 GHz and features gold-plated brass construction with PTFE dielectric material. The part is currently in active production status with 744 units available in stock. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing, inventory management, or specific connector configuration variations while maintaining electrical and mechanical compatibility.

Substiute Parts

SMP-P-P-H-ST-TH2-PIN

Samtec Inc.In Stock: 811SMP-P-P-H-ST-TH2-PIN Datasheet

Current PartRFQ

SMP-P-P-ST-TH2-INS

Samtec Inc.In Stock: 838SMP-P-P-ST-TH2-INS Datasheet

Parametric EquivalentRFQ

SMP-PC-P-G-ST-TH2-SHL

Samtec Inc.In Stock: 895SMP-PC-P-G-ST-TH2-SHL Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SMP-P-P-H-ST-TH2-PIN are identified based on strict electrical and mechanical parameter matching. The critical parameters that determine substitution eligibility are:

Electrical Parameters:

• Impedance: 50 Ohms
• Frequency - Max: 40 GHz
• Dielectric Material: Polytetrafluoroethylene (PTFE)

Mechanical Parameters:

• Connector Style: SMP
• Connector Type: Plug, Male Pin
• Mounting Type: Through Hole
• Contact Termination: Solder
• Shield Termination: Solder
• Fastening Type: Snap-On

Material & Finish Parameters:

• Center Contact Material: Brass
• Body Material: Brass
• Body Finish: Gold
• Center Contact Plating: Gold

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• ECCN: EAR99
• HTSUS: 8536.69.4010

All identified substitute parts maintain identical values across these parameters, ensuring direct functional and mechanical compatibility without design modification.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SMP-P-P-H-ST-TH2-PIN, SMP-P-P-ST-TH2-INS, and SMP-PC-P-G-ST-TH2-SHL—are manufactured by Samtec Inc. and maintain active product status. Each part is ROHS3 compliant and classified under ECCN EAR99 with identical HTSUS coding, confirming regulatory equivalence.

Selection between these parts is based on inventory availability and specific connector configuration requirements as reflected in part number nomenclature. All three parts satisfy identical electrical specifications (50 Ohm impedance, 40 GHz maximum frequency) and mechanical requirements (through-hole solder termination, snap-on fastening, PTFE dielectric). The parts are interchangeable from an electrical and mechanical standpoint within applications requiring SMP male pin connectors with the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can SMP-P-P-ST-TH2-INS be used as a direct replacement for SMP-P-P-H-ST-TH2-PIN?

A: Yes. Both parts share identical electrical parameters (50 Ohm impedance, 40 GHz frequency rating), mechanical specifications (through-hole solder termination, snap-on fastening), and material composition (brass body with gold plating, PTFE dielectric). The parts are electrically and mechanically equivalent.

Q: What is the difference between these three part numbers?

A: The differences are reflected in the part number nomenclature and do not affect electrical or mechanical performance. All three parts maintain identical impedance, frequency rating, termination method, and material specifications. Differences relate to specific connector configuration variants within the SMP series.

Q: Are all three parts RoHS compliant?

A: Yes. All three parts—SMP-P-P-H-ST-TH2-PIN, SMP-P-P-ST-TH2-INS, and SMP-PC-P-G-ST-TH2-SHL—are ROHS3 compliant and carry identical ECCN and HTSUS classifications.

Q: Which part should be selected based on availability?

A: Selection can be based on inventory levels. SMP-PC-P-G-ST-TH2-SHL has 798 units in stock, SMP-P-P-H-ST-TH2-PIN has 744 units, and SMP-P-P-ST-TH2-INS has 728 units. All parts are equivalent for application purposes.

Q: Do these connectors support the same frequency range?

A: Yes. All three parts are rated for maximum frequency operation up to 40 GHz, making them suitable for identical RF applications.

Q: Are the solder termination specifications identical across all three parts?

A: Yes. All three parts feature solder contact termination and solder shield termination, with identical center contact material (brass) and plating (gold).