SMP-MSLD-PCS11T Equivalent & Substitute Parts

Part Overview

The SMP-MSLD-PCS11T is an RF coaxial connector manufactured by Amphenol RF, classified as an SMP Jack with Male Pin configuration. This surface mount solder connector operates at 50 Ohms impedance and supports frequencies up to 12 GHz. The connector is designed for PCB integration with snap-on fastening and limited detent features. The part is currently Active in product status with 1205 pieces available in inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, inventory management, or supply chain continuity.

Substiute Parts

SMP-MSLD-PCS11T

Amphenol RFIn Stock: 1243SMP-MSLD-PCS11T Datasheet

Current PartRFQ

SMP-MSLD-PCR-T

Amphenol RFIn Stock: 9146SMP-MSLD-PCR-T Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SMP-MSLD-PCS11T are identified based on strict electrical and mechanical parameter equivalence. The following parameters define substitution eligibility:

Critical Matching Parameters:

• Connector Style: SMP
• Connector Type: Jack, Male Pin
• Impedance: 50 Ohms
• Mounting Type: Surface Mount
• Contact Termination: Solder
• Shield Termination: Solder
• Frequency - Max: 12 GHz
• Operating Temperature: -65°C ~ 165°C
• Mating Cycles: 500
• Center Contact Material: Beryllium Copper
• Body Material: Brass
• Dielectric Material: Polyetheretherketone (PEEK)
• RoHS Status: ROHS3 Compliant
• MSL: 1 (Unlimited)

Parts meeting all critical parameters are classified as parametric equivalents and direct substitutes. The SMP-MSLD-PCS11T shares the same base product number (SMP-MSLD) with its substitute, confirming functional and dimensional compatibility.

Parameter Comparison

Engineering Selection Recommendations

The SMP-MSLD-PCR-T is a direct parametric equivalent to the SMP-MSLD-PCS11T. Both parts are manufactured by Amphenol RF, share identical electrical specifications (50 Ohms, 12 GHz maximum frequency), and possess equivalent mechanical characteristics (SMP Jack, Male Pin, Surface Mount Solder). Both parts maintain Active product status and comply with ROHS3 and REACH requirements.

Selection between these parts is based on inventory availability and supply chain considerations. The SMP-MSLD-PCS11T currently has 1205 pieces in stock, while the SMP-MSLD-PCR-T has 9083 pieces available. Both parts are packaged in Tape & Reel format and carry identical compliance certifications (EAR99, HTSUS 8536.69.4010, MSL 1).

For applications requiring RF coaxial connectivity at 50 Ohms impedance with surface mount solder termination, either part satisfies the electrical and mechanical requirements without design modification.

Frequently Asked Questions (FAQ)

Q: Can SMP-MSLD-PCR-T be used as a direct replacement for SMP-MSLD-PCS11T?

A: Yes. Both parts are parametric equivalents with identical electrical specifications (50 Ohms, 12 GHz), mechanical configuration (SMP Jack, Male Pin, Surface Mount), and material composition (Beryllium Copper center contact, Brass body, PEEK dielectric). No design changes are required for substitution.

Q: What are the key parameters that define substitution eligibility?

A: Substitution is determined by matching: Connector Style (SMP), Connector Type (Jack, Male Pin), Impedance (50 Ohms), Mounting Type (Surface Mount), Contact Termination (Solder), Frequency capability (12 GHz), Operating Temperature range (-65°C ~ 165°C), and Mating Cycles (500). Both parts meet all criteria.

Q: Are there packaging differences between these parts?

A: No. Both SMP-MSLD-PCS11T and SMP-MSLD-PCR-T are supplied in Tape & Reel (TR) packaging with identical Moisture Sensitivity Level (MSL 1 - Unlimited).

Q: Do both parts comply with regulatory requirements?

A: Yes. Both parts are ROHS3 Compliant, REACH Affected, classified as EAR99, and assigned HTSUS code 8536.69.4010. Compliance status is identical.

Q: What is the difference between these part numbers if they are equivalent?

A: The part numbers differ (PCS11T versus PCR-T), but this reflects internal Amphenol RF product line designations. The electrical and mechanical specifications are identical, making them functionally interchangeable for RF coaxial connector applications.

Q: Which part should be selected based on availability?

A: Selection should be based on project timeline and inventory requirements. SMP-MSLD-PCR-T has higher current inventory (9083 pieces) compared to SMP-MSLD-PCS11T (1205 pieces). Both parts are Active and available for immediate procurement.