Request Quote
(Ships tomorrow)
SMLJ18CE3/TR13 Equivalent & Substitute Parts
Part Overview
The SMLJ18CE3/TR13 is a transient voltage suppressor (TVS) diode manufactured by Microchip Technology, designed for general-purpose overvoltage protection in surface-mount applications. This bidirectional Zener diode operates with an 18V reverse standoff voltage and provides clamping at 32.2V maximum, with a peak pulse current rating of 93.2A and peak pulse power of 300W. The device is housed in a DO-214AB (SMC) package and is supplied in Tape & Reel (TR) packaging format.
The SMLJ18CE3/TR13 is classified as an Active product with full RoHS3 compliance and REACH unaffected status. Equivalent and substitute parts are identified based on matching electrical characteristics within the 18V protection class, surface-mount packaging compatibility, and operational temperature ranges. Substitute devices may vary in peak pulse current ratings, clamping voltages, and power dissipation capabilities while maintaining core voltage protection parameters.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Voltage - Reverse Standoff (Typ) | 18 | V |
| Voltage - Breakdown (Min) | 20 | V |
| Voltage - Clamping (Max) @ Ipp | 32.2 | V |
| Current - Peak Pulse (10/1000µs) | 93.2 | A |
| Power - Peak Pulse | 300 | W |
| Operating Temperature Range | -55 to 150 | °C (TJ) |
| Mounting Type | Surface Mount | — |
| Package / Case | DO-214AB, SMC | — |
| Type | Zener | — |
| Bidirectional Channels | 1 | — |
| RoHS Status | ROHS3 Compliant | — |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | — |
Substitute Part Grouping Explanation
Substitute parts for the SMLJ18CE3/TR13 are qualified based on the following core electrical and mechanical parameters:
Voltage Protection Class: All substitute devices maintain an 18V reverse standoff voltage with 20V minimum breakdown voltage, ensuring equivalent protection thresholds.
Package Compatibility: All substitutes utilize the DO-214AB (SMC) surface-mount package, maintaining mechanical and thermal interface compatibility with the original design.
Bidirectional Configuration: All substitute parts are single-channel bidirectional Zener diodes, providing identical transient suppression polarity characteristics.
Operating Temperature Range: Substitute devices operate within -55°C to 150°C or -55°C to 175°C junction temperature ranges, maintaining thermal performance within or exceeding the original specification.
Compliance Standards: All substitute parts are RoHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings, ensuring environmental and reliability equivalence.
Variable Parameters: Peak pulse current (Ipp), clamping voltage at Ipp, and peak pulse power dissipation vary among substitutes. These parameters determine the device's ability to handle transient energy and are application-dependent. Devices with higher Ipp ratings and power dissipation provide enhanced protection margin for high-energy transient events.
Parameter Comparison
| Part Number | Manufacturer | Voltage - Reverse Standoff (V) | Voltage - Clamping (Max) @ Ipp (V) | Current - Peak Pulse (A) | Power - Peak Pulse (W) | Operating Temperature (°C) | Package | RoHS Status |
|---|---|---|---|---|---|---|---|---|
| SMLJ18CE3/TR13 | Microchip Technology | 18 | 32.2 | 93.2 | 300 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| 5.0SMDJ18CA | MDE Semiconductor Inc | 18 | 29.2 | 172 | 5000 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMCJ18CA | EVVO Semi | 18 | 29.2 | 51.4 | 1500 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMCJ18CA-13-F | Diodes Incorporated | 18 | 29.2 | 51.4 | 1500 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMCJ18CA-TP | Micro Commercial Co | 18 | 29.2 | 51.4 | 1500 | -55 to 175 | DO-214AB, SMC | ROHS3 Compliant |
| SMCJ18CA-TR | STMicroelectronics | 18 | 39.3 | 254 | 1500 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMDJ18CA | Alpha & Omega Semiconductor Inc. | 18 | 29.2 | 102.8 | 3000 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMLJ18CA | Bourns Inc. | 18 | 29.2 | 102.8 | 3000 | -55 to 150 | DO-214AB, SMC | ROHS3 Compliant |
| SMLJ18CA-TP | Micro Commercial Co | 18 | 29.2 | 102.8 | 3000 | -55 to 175 | DO-214AB, SMC | ROHS3 Compliant |
Engineering Selection Recommendations
Direct Electrical Equivalence: The SMLJ18CA (Bourns Inc.) and SMLJ18CA-TP (Micro Commercial Co) provide the closest electrical match to the SMLJ18CE3/TR13, with identical 18V reverse standoff voltage, 29.2V clamping voltage, and 102.8A peak pulse current. Both devices are RoHS3 compliant with MSL 1 ratings. The SMLJ18CA-TP variant offers an extended operating temperature range to 175°C, providing thermal margin for high-ambient applications.
Higher Energy Dissipation Alternatives: The SMDJ18CA (Alpha & Omega Semiconductor Inc.) matches the SMLJ18CA electrical specifications while offering 3000W peak pulse power, equivalent to the SMLJ18CA series. The 5.0SMDJ18CA (MDE Semiconductor Inc) provides significantly enhanced transient energy handling with 172A peak pulse current and 5000W peak pulse power, suitable for applications requiring superior protection margin against high-energy transient events.
Lower Current Rating Alternatives: The SMCJ18CA variants (EVVO Semi, Diodes Incorporated, Micro Commercial Co) provide 51.4A peak pulse current with 1500W power dissipation. These devices are suitable for applications with lower transient energy requirements. The SMCJ18CA-TP variant from Micro Commercial Co extends the operating temperature to 175°C.
Higher Clamping Voltage Consideration: The SMCJ18CA-TR (STMicroelectronics) exhibits a 39.3V maximum clamping voltage, which is higher than the original 32.2V specification. This device is suitable only when the application circuit can tolerate elevated clamping voltages without component damage.
Compliance and Availability: All substitute parts maintain RoHS3 compliance and MSL 1 moisture sensitivity ratings. Selection should account for inventory availability and lead time requirements based on application criticality.
Frequently Asked Questions (FAQ)
Q: Can I substitute the SMLJ18CE3/TR13 with a lower current-rated device such as SMCJ18CA?
A: Substitution with lower current-rated devices is application-dependent. The SMCJ18CA provides 51.4A peak pulse current compared to the original 93.2A rating. This device is suitable only if the transient energy in your application does not exceed the 1500W power dissipation limit. For applications with high-energy transients, lower-rated devices may not provide adequate protection and could fail prematurely.
Q: What is the significance of the clamping voltage difference between substitute parts?
A: Clamping voltage determines the maximum voltage that appears across the protected circuit during a transient event. The original SMLJ18CE3/TR13 clamps at 32.2V maximum. Substitutes range from 29.2V to 39.3V. Devices with lower clamping voltages (29.2V) provide tighter voltage regulation and better component protection. Devices with higher clamping voltages (39.3V) may allow excessive voltage stress on sensitive components. Selection must align with the protected circuit's voltage tolerance specifications.
Q: Are all substitute parts compatible with the same PCB footprint?
A: Yes. All substitute parts utilize the DO-214AB (SMC) surface-mount package, which maintains identical mechanical dimensions and land pattern compatibility. No PCB redesign is required for substitution. However, thermal management considerations may differ based on peak pulse power ratings; devices with higher power dissipation may require enhanced thermal coupling to the PCB ground plane.
Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) packaging?
A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape packaging supplies components on cut segments of carrier tape, suitable for lower-volume or manual assembly processes. Both packaging formats contain identical components; the difference is in supply format and handling. The SMLJ18CE3/TR13 is supplied in Tape & Reel format. Substitute parts are available in both formats depending on manufacturer and distributor offerings.
Q: Can I use the SMCJ18CA-TR (STMicroelectronics) as a direct substitute despite its higher clamping voltage?
A: The SMCJ18CA-TR exhibits a 39.3V maximum clamping voltage, which exceeds the original 32.2V specification by approximately 7V. This device is not a direct substitute for applications where the protected circuit components have voltage ratings close to the original clamping specification. Use this device only when the application circuit design accommodates the higher clamping voltage without risk of component overstress or failure.
Q: Which substitute part offers the best protection margin for transient suppression?
A: The 5.0SMDJ18CA (MDE Semiconductor Inc) provides the highest transient energy handling capability with 172A peak pulse current and 5000W peak pulse power. This device offers the greatest protection margin against high-energy transient events. Selection of this device is appropriate for applications with severe transient environments or where protection reliability is critical.
Q: Are there temperature range differences between substitute parts that affect selection?
A: Yes. Most substitute parts operate within -55°C to 150°C junction temperature range, matching the original specification. However, SMCJ18CA-TP and SMLJ18CA-TP variants extend the upper operating temperature to 175°C. These extended-temperature variants are suitable for applications in high-ambient or high-power-dissipation environments where junction temperatures may exceed 150°C.
Q: What does MSL 1 (Unlimited) moisture sensitivity rating mean for component handling?
A: MSL 1 (Unlimited) indicates that the component has no moisture sensitivity limitations. These devices do not require special moisture-controlled storage, desiccant packaging, or bake-out procedures prior to soldering. Standard component handling and storage practices are sufficient, simplifying supply chain management and reducing storage costs.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts