SML-010FTT86 Equivalent & Substitute Parts

Part Overview

The SML-010FTT86 is a green surface mount LED indicator manufactured by Rohm Semiconductor, designed for discrete indication applications in 1208 (3020 Metric) package format. This part operates at 2.2V forward voltage with a 10mcd brightness rating and 560nm peak wavelength output. The product is classified as Not For New Designs, making identification of active equivalent alternatives essential for ongoing production and new design implementations.

Substiute Parts

SML-010FTT86

Rohm SemiconductorIn Stock: 3933SML-010FTT86 Datasheet

Current PartRFQ

S7L-010FTT86M

Rohm SemiconductorIn Stock: 1099S7L-010FTT86M Datasheet

DirectRFQ

SML-012P8TT86

Rohm SemiconductorIn Stock: 5383SML-012P8TT86 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SML-010FTT86 is determined by the following critical parameters: color (green), lens transparency (clear), forward voltage (2.2V), test current (20mA), wavelength (560nm), package format (1208/3020 Metric), mounting type (surface mount), physical dimensions, and compliance certifications (RoHS3, REACH Unaffected).

The identified substitute parts maintain compatibility across these core parameters while differing in product status and brightness rating (millicandela). The SML-012P8TT86 shares identical electrical characteristics, package specifications, and compliance requirements. The S7L-010FTT86M provides functional equivalence in color, voltage, and current specifications, though with limited detailed parameter documentation in the provided data.

Parameter Comparison

Engineering Selection Recommendations

The SML-012P8TT86 is the primary substitute for the SML-010FTT86. Both parts are manufactured by Rohm Semiconductor, share identical electrical specifications (2.2V forward voltage, 20mA test current, 560nm wavelength), and maintain the same 1208 (3020 Metric) package format with matching physical dimensions. The SML-012P8TT86 holds Active product status, ensuring long-term availability and supply chain continuity. The brightness differential (6.3mcd versus 10mcd) must be evaluated against application requirements; lower brightness may be acceptable for indicator applications where visibility margin exists.

The S7L-010FTT86M is listed as an alternative with Active status and full compliance certifications. However, detailed electrical and mechanical parameters are not provided in the available data, limiting direct compatibility assessment. This part should be considered only when complete specification documentation confirms equivalence across all critical parameters.

Frequently Asked Questions (FAQ)

Q: Can the SML-012P8TT86 directly replace the SML-010FTT86 in existing designs?

A: Yes, for applications where the lower brightness rating (6.3mcd versus 10mcd) is acceptable. Both parts share identical forward voltage (2.2V), test current (20mA), wavelength (560nm), and package specifications (1208/3020 Metric). Physical dimensions and mounting characteristics are identical.

Q: What is the significance of the "Not For New Designs" status on the SML-010FTT86?

A: This designation indicates the part is in mature or end-of-life phase. Rohm Semiconductor recommends using active alternatives for new designs. The SML-012P8TT86 and S7L-010FTT86M both carry Active status.

Q: Are there brightness considerations when substituting the SML-010FTT86?

A: The SML-010FTT86 operates at 10mcd brightness, while the SML-012P8TT86 operates at 6.3mcd. Application requirements determine acceptability. Indicator applications with adequate viewing distance typically tolerate this reduction without functional impact.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. Both the SML-010FTT86 and identified substitutes are ROHS3 Compliant, REACH Unaffected, and carry identical Moisture Sensitivity Level (MSL) ratings of 3 (168 Hours).

Q: What packaging format is used for these parts?

A: All parts use 1208 (3020 Metric) package format in Surface Mount configuration, with dimensions of 3.00mm L x 2.00mm W and maximum height of 1.50mm.