Request Quote
(Ships tomorrow)
SMCJ75AE3/TR13 Equivalent & Substitute Parts Reference
Part Overview
The SMCJ75AE3/TR13 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Microchip Technology, designed for general-purpose overvoltage protection in surface-mount applications. This component features a 75V reverse standoff voltage with a 121V maximum clamping voltage and 12.4A peak pulse current capability. The part is classified as Active status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).
Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternative manufacturers while maintaining electrical and mechanical compatibility within specified parameter tolerances.
Substiute Parts
Key Parameters
| Parameter | Value | Unit | Substitution Relevance |
|---|---|---|---|
| Voltage - Reverse Standoff (Typ) | 75 | V | Critical - Must match exactly |
| Voltage - Breakdown (Min) | 83.3 | V | Critical - Must match exactly |
| Voltage - Clamping (Max) @ Ipp | 121 | V | Critical - Must match exactly |
| Current - Peak Pulse (10/1000µs) | 12.4 | A | Critical - Minimum requirement |
| Power - Peak Pulse | 1500 | W | Critical - Minimum requirement |
| Type | Zener | - | Critical - Must match |
| Unidirectional Channels | 1 | - | Critical - Must match |
| Package / Case | DO-214AB, SMC | - | Critical - Physical compatibility |
| Mounting Type | Surface Mount | - | Critical - Must match |
| Operating Temperature | -65°C ~ 150°C | °C | Important - Application dependent |
| RoHS Status | ROHS3 Compliant | - | Regulatory - Must match |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) | - | Handling - Must match or exceed |
Substitute Part Grouping Explanation
Substitute parts for the SMCJ75AE3/TR13 are classified into two categories based on electrical parameter compatibility:
Direct Equivalents (Identical Electrical Parameters): Parts that maintain all critical electrical specifications: 75V reverse standoff voltage, 83.3V minimum breakdown voltage, 121V maximum clamping voltage, and 12.4A peak pulse current. These parts are interchangeable at the circuit level with no design modifications required. Direct equivalents include SMCJ75A (Meritek), SMCJ75A-13-F (Diodes Incorporated), and SMCJ75A-E3/57T (Vishay General Semiconductor).
Similar Parts (Enhanced Electrical Parameters): Parts that exceed the minimum electrical requirements while maintaining the same voltage specifications. These include higher peak pulse current ratings (24.8A to 41.4A) and correspondingly higher power dissipation capabilities (3000W to 5000W). Similar parts are 5.0SMDJ75A-T7 (Littelfuse Inc.), 5.0SMDJ75A (Taiwan Semiconductor Corporation), SMDJ75A (Alpha & Omega Semiconductor Inc.), and SMLJ75A (Bourns Inc.). These parts provide enhanced protection margins and are suitable for applications requiring higher transient energy absorption.
Substitution Criteria: All substitute parts maintain identical voltage parameters (75V standoff, 83.3V breakdown, 121V clamping), unidirectional topology, DO-214AB (SMC) package, surface-mount configuration, and RoHS3 compliance. Operating temperature ranges vary between -55°C to -65°C minimum and 150°C to 175°C maximum. All parts are classified as Active status with MSL 1 rating.
Parameter Comparison
| Part Number | Manufacturer | Voltage Standoff (V) | Breakdown Min (V) | Clamp Max (V) | Peak Pulse (A) | Power (W) | Temp Range (°C) | Package | Status |
|---|---|---|---|---|---|---|---|---|---|
| SMCJ75AE3/TR13 | Microchip Technology | 75 | 83.3 | 121 | 12.4 | 1500 | -65 to 150 | DO-214AB (SMC) | Active |
| SMCJ75A | Meritek | 75 | 83.3 | 121 | 12.4 | 1500 | -55 to 150 | DO-214AB (SMC) | Active |
| SMCJ75A-13-F | Diodes Incorporated | 75 | 83.3 | 121 | 12.4 | 1500 | -55 to 150 | DO-214AB (SMC) | Active |
| SMCJ75A-E3/57T | Vishay General Semiconductor | 75 | 83.3 | 121 | 12.4 | 1500 | -55 to 150 | DO-214AB (SMC) | Active |
| 5.0SMDJ75A-T7 | Littelfuse Inc. | 75 | 83.3 | 121 | 41.4 | 5000 | -65 to 150 | DO-214AB (SMC) | Active |
| 5.0SMDJ75A | Taiwan Semiconductor Corporation | 75 | 83.3 | 121 | 41.4 | 5000 | -55 to 175 | DO-214AB (SMC) | Active |
| SMDJ75A | Alpha & Omega Semiconductor Inc. | 75 | 83.3 | 121 | 24.8 | 3000 | -55 to 150 | DO-214AB (SMC) | Active |
| SMLJ75A | Bourns Inc. | 75 | 83.3 | 121 | 24.8 | 3000 | -55 to 150 | DO-214AB (SMC) | Active |
Engineering Selection Recommendations
Direct Equivalent Selection: SMCJ75A (Meritek), SMCJ75A-13-F (Diodes Incorporated), and SMCJ75A-E3/57T (Vishay General Semiconductor) are direct electrical equivalents suitable for one-to-one replacement. All three maintain identical voltage specifications and 12.4A peak pulse current. Selection among these direct equivalents depends on packaging availability (Tape & Reel versus Cut Tape) and inventory levels. All three are Active status with RoHS3 compliance and MSL 1 rating. The primary consideration is the minimum operating temperature: Meritek and Diodes Incorporated variants specify -55°C minimum, while the original part and Vishay variant specify -65°C minimum. Applications requiring operation below -55°C must use SMCJ75AE3/TR13 or SMCJ75A-E3/57T.
Enhanced Parameter Selection: SMDJ75A (Alpha & Omega Semiconductor Inc.) and SMLJ75A (Bourns Inc.) provide 24.8A peak pulse current and 3000W power dissipation, representing a 2x enhancement over the base specification. These parts are suitable for applications with higher transient energy requirements while maintaining identical voltage protection levels. Both are Active status with RoHS3 compliance. SMLJ75A carries REACH Affected status, requiring verification against specific regulatory requirements.
High-Power Selection: 5.0SMDJ75A-T7 (Littelfuse Inc.) and 5.0SMDJ75A (Taiwan Semiconductor Corporation) provide 41.4A peak pulse current and 5000W power dissipation, representing a 3.3x enhancement. These parts are appropriate for high-energy transient protection applications. 5.0SMDJ75A-T7 maintains the -65°C to 150°C temperature range of the original part. 5.0SMDJ75A extends the upper operating temperature to 175°C, suitable for elevated ambient applications.
Compliance Verification: All substitute parts maintain RoHS3 compliance and REACH Unaffected or REACH Affected status. Applications subject to REACH regulations must confirm compatibility with the specific regulatory framework. All parts carry MSL 1 (Unlimited) rating, eliminating moisture sensitivity handling constraints.
Frequently Asked Questions (FAQ)
Q: Can SMCJ75A (Meritek) be used as a direct replacement for SMCJ75AE3/TR13?
A: SMCJ75A is electrically equivalent with identical voltage specifications (75V standoff, 121V clamp) and peak pulse current (12.4A). The primary difference is the minimum operating temperature: SMCJ75A specifies -55°C minimum versus -65°C for the original part. Direct substitution is valid for applications operating above -55°C. Applications requiring -65°C operation must use SMCJ75A-E3/57T (Vishay) or retain the original Microchip part.
Q: What is the difference between direct equivalents and similar parts?
A: Direct equivalents (SMCJ75A variants) maintain identical electrical specifications including 12.4A peak pulse current and 1500W power dissipation. Similar parts (SMDJ75A, SMLJ75A, 5.0SMDJ75A series) provide higher peak pulse current (24.8A to 41.4A) and power dissipation (3000W to 5000W) while maintaining the same voltage protection levels. Similar parts offer enhanced protection margins and are suitable for higher-energy transient environments.
Q: Are all substitute parts available in the same packaging?
A: All substitute parts use DO-214AB (SMC) surface-mount package, ensuring physical compatibility with the original design. Packaging variations exist in tape format: some are supplied in Tape & Reel (TR), others in Cut Tape (CT) with Digi-Reel®. These variations affect handling and automated assembly but do not impact electrical performance or PCB footprint compatibility.
Q: Can I use 5.0SMDJ75A-T7 in place of SMCJ75AE3/TR13 for enhanced protection?
A: Yes. 5.0SMDJ75A-T7 maintains identical voltage specifications (75V standoff, 121V clamp) and provides 41.4A peak pulse current versus 12.4A in the original part. This represents a 3.3x increase in transient energy absorption capability. The part is suitable for applications requiring higher protection margins. Operating temperature range (-65°C to 150°C) matches the original specification. Verify that the circuit design can accommodate the higher current capability without introducing unintended side effects.
Q: What is the impact of operating temperature range differences?
A: Operating temperature range affects component reliability in extreme environments. SMCJ75AE3/TR13 and 5.0SMDJ75A-T7 specify -65°C to 150°C. Most alternative parts specify -55°C to 150°C, limiting low-temperature operation by 10°C. 5.0SMDJ75A extends the upper limit to 175°C. Applications operating below -55°C must use parts explicitly rated to -65°C. Applications in elevated-temperature environments (above 150°C) require 5.0SMDJ75A.
Q: Are there any regulatory compliance differences between substitute parts?
A: All substitute parts are RoHS3 compliant. REACH status varies: most parts are REACH Unaffected; SMLJ75A is REACH Affected. Applications subject to REACH regulations must verify compatibility with the specific regulatory framework applicable to the end-use market. All parts carry MSL 1 (Unlimited) rating, eliminating moisture sensitivity constraints.
Q: How do I select between Meritek, Diodes Incorporated, and Vishay variants of SMCJ75A?
A: All three manufacturers provide electrically identical SMCJ75A parts with 75V standoff, 121V clamp, and 12.4A peak pulse current. Selection criteria are: (1) Minimum operating temperature requirement: Vishay variant supports -65°C; Meritek and Diodes support -55°C. (2) Packaging format: Vishay and Microchip use Tape & Reel; Diodes offers Cut Tape with Digi-Reel®. (3) Inventory availability and lead time. (4) Supplier qualification and quality certifications specific to your organization.
Q: Can substitute parts with higher power ratings cause circuit damage?
A: Higher power-rated parts (SMDJ75A, SMLJ75A, 5.0SMDJ75A series) do not cause damage when substituted for lower-rated parts. These components are passive protective devices that respond to transient overvoltage events. Higher current and power ratings indicate greater transient energy absorption capability. The circuit protection function remains identical; the substitute part simply provides enhanced margin. Verify that the circuit design does not depend on specific clamping voltage characteristics that might be affected by manufacturer variations within the specified tolerance band.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts