SMCJ70CA-M3/9AT Equivalent & Substitute Parts

Part Overview

The SMCJ70CA-M3/9AT is a bidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the 70V reverse standoff category and is designed for general-purpose transient protection applications. The part is Active status and RoHS3 compliant, with unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical characteristics and mechanical compatibility within the DO-214AB (SMC) package family.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	70	V
Voltage - Breakdown (Min)	77.8	V
Voltage - Clamping (Max) @ Ipp	113	V
Current - Peak Pulse (10/1000µs)	13.3	A
Power - Peak Pulse	1500	W
Operating Temperature Range	-55 to 150	°C
Package / Case	DO-214AB, SMC	-
Mounting Type	Surface Mount	-
Type	Zener	-
Bidirectional Channels	1	-

Substitute Part Grouping Explanation

Substitute parts for the SMCJ70CA-M3/9AT are classified based on strict electrical and mechanical parameter matching:

Group 1: Direct Electrical Equivalents (Identical Parameters) Parts that match all critical electrical specifications: 70V reverse standoff, 77.8V minimum breakdown voltage, 113V maximum clamping voltage, 13.3A peak pulse current, and 1500W peak pulse power. These parts are interchangeable in applications where the specified electrical performance is required. Packaging format variations (Tape & Reel, Cut Tape, Digi-Reel) do not affect electrical equivalence.

Group 2: Enhanced Performance Alternatives Parts that maintain the same voltage ratings but offer increased current handling or power dissipation capability. These parts provide superior transient protection capacity while remaining compatible with the same circuit topology.

Group 3: Modified Electrical Characteristics Parts that share the same voltage standoff and breakdown specifications but differ in clamping voltage or peak pulse current ratings. These require circuit-level verification before substitution.

Key Parameters for Substitution Determination:

Voltage - Reverse Standoff (Typ): 70V
Voltage - Breakdown (Min): 77.8V
Voltage - Clamping (Max) @ Ipp: 113V (primary criterion)
Current - Peak Pulse (10/1000µs): 13.3A (primary criterion)
Power - Peak Pulse: 1500W (primary criterion)
Package / Case: DO-214AB, SMC (mechanical compatibility)
Mounting Type: Surface Mount (assembly compatibility)

Parameter Comparison

Part Number	Manufacturer	VWM (V)	VBR (V)	VC (V)	Ipp (A)	PPP (W)	Temp Range (°C)	Packaging	Status
SMCJ70CA-M3/9AT	Vishay	70	77.8	113	13.3	1500	-55 to 150	TR	Active
SMCJ70CA-E3/57T	Vishay	70	77.8	113	13.3	1500	-55 to 150	CT/Digi-Reel	Active
SMCJ70CA	Fairchild Semiconductor	70	77.8	113	13.3	1500	-55 to 150	-	Active
SMCJ70CA-13-F	Diodes Incorporated	70	77.8	113	13.3	1500	-55 to 150	TR	Active
SMCJ70CA-TP	Micro Commercial Co	70	77.8	113	13.3	1500	-55 to 175	TR	Active
5.0SMDJ70CA	MDE Semiconductor Inc	70	77.8	113	44.3	5000	-55 to 150	TR	Active
SMCJ70CA-TR	STMicroelectronics	70	77.8	146	69	1500	-55 to 150	TR	Active

Engineering Selection Recommendations

Direct Substitution (Group 1): SMCJ70CA-E3/57T, SMCJ70CA (Fairchild), SMCJ70CA-13-F, and SMCJ70CA-TP are direct electrical equivalents with identical voltage and current specifications. All parts are Active status and RoHS3 compliant. Selection among these parts is determined by packaging availability and supply chain requirements. SMCJ70CA-TP offers extended operating temperature range (-55°C to 175°C) compared to the standard -55°C to 150°C specification, providing additional thermal margin in high-temperature applications.

Enhanced Performance Alternative (Group 2): 5.0SMDJ70CA provides identical voltage characteristics with significantly increased current handling (44.3A vs. 13.3A) and power dissipation (5000W vs. 1500W). This part is suitable for applications requiring greater transient energy absorption while maintaining the same voltage protection threshold. Active status and RoHS3 compliance confirmed.

Modified Characteristics (Group 3): SMCJ70CA-TR (STMicroelectronics) maintains the 70V reverse standoff and 77.8V breakdown voltage but increases clamping voltage to 146V and peak pulse current to 69A (8/20µs pulse). This part is not a direct substitute and requires circuit analysis to confirm compatibility with the application's voltage tolerance specifications.

All recommended parts are Active status, RoHS3 compliant, and MSL 1 rated. Selection should prioritize parts with highest inventory availability for supply chain continuity.

Frequently Asked Questions (FAQ)

Q: Can SMCJ70CA-TP replace SMCJ70CA-M3/9AT directly? A: Yes. SMCJ70CA-TP is a direct electrical equivalent with identical voltage and current ratings. The extended operating temperature range (-55°C to 175°C vs. -55°C to 150°C) provides additional thermal capability without affecting circuit performance.

Q: What is the difference between packaging formats (TR, CT, Digi-Reel)? A: Packaging format refers to supply method only: Tape & Reel (TR) for automated assembly, Cut Tape (CT) for manual handling, and Digi-Reel for specific distributor formats. Electrical and mechanical specifications remain identical. Selection is based on assembly process requirements.

Q: Is 5.0SMDJ70CA a suitable replacement? A: 5.0SMDJ70CA maintains identical voltage protection (70V standoff, 113V clamping) but provides enhanced current and power handling (44.3A, 5000W vs. 13.3A, 1500W). It is suitable for applications requiring greater transient energy absorption. No circuit modification is required for direct substitution.

Q: Why does SMCJ70CA-TR have different clamping voltage and current? A: SMCJ70CA-TR (STMicroelectronics) is a variant with modified electrical characteristics: 146V clamping voltage and 69A peak pulse current. While voltage standoff remains 70V, the higher clamping voltage may exceed application tolerance limits. Circuit-level verification is required before substitution.

Q: Are all substitute parts RoHS3 compliant? A: All recommended substitute parts are RoHS3 compliant and MSL 1 rated, meeting environmental and reliability standards equivalent to the primary part.

Q: What is the significance of the base product number SMCJ70? A: SMCJ70 is the base product designation indicating the 70V reverse standoff voltage class. Suffix variations (CA, -M3/9AT, -E3/57T, -TP, -TR, -13-F) denote manufacturer, packaging format, and minor specification variants within this voltage class.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message