Request Quote
(Ships tomorrow)
SMCJ70A-M3/9AT Equivalent & Substitute Parts
Part Overview
The SMCJ70A-M3/9AT is a unidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the TransZorb® series and is designed for general-purpose transient voltage suppression applications. The part is active in production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).
Equivalent and substitute parts are identified based on matching electrical performance characteristics and mechanical compatibility within the DO-214AB (SMC) package form factor. Substitution becomes necessary when the primary part number is unavailable or when alternative sourcing is required while maintaining circuit performance specifications.
Substiute Parts
Key Parameters
| Parameter | Value | Unit |
|---|---|---|
| Voltage - Reverse Standoff (Typ) | 70 | V |
| Voltage - Breakdown (Min) | 77.8 | V |
| Voltage - Clamping (Max) @ Ipp | 113 | V |
| Current - Peak Pulse (10/1000µs) | 13.3 | A |
| Power - Peak Pulse | 1500 | W |
| Operating Temperature Range | -55 to 150 | °C |
| Mounting Type | Surface Mount | — |
| Package / Case | DO-214AB, SMC | — |
| Type | Zener | — |
| Unidirectional Channels | 1 | — |
Substitute Part Grouping Explanation
Substitute parts for the SMCJ70A-M3/9AT are classified into two categories based on electrical and mechanical compatibility:
Category 1: Direct Electrical Equivalents (1500W Class) Parts that maintain identical electrical specifications including voltage ratings (70V standoff, 77.8V breakdown, 113V clamping) and peak pulse current (13.3A ± 0.03A tolerance). These parts are interchangeable at the circuit level and differ only in packaging format (Tape & Reel vs. Cut Tape) or manufacturer source. Included parts: SMCJ70A-E3/57T (Vishay, Cut Tape packaging), SMCJ70A (Meritek, Tape & Reel), and SMCJ70A-TP (Micro Commercial Co, Tape & Reel).
Category 2: Higher Power Rated Alternatives (3000W–5000W Class) Parts that maintain the same voltage specifications but provide increased peak pulse current and power dissipation capability. These parts are suitable for applications requiring enhanced transient energy absorption. Included parts: SMDJ70A (Alpha & Omega Semiconductor, 3000W / 26.6A), 5.0SMDJ70A (Taiwan Semiconductor Corporation, 5000W / 44.3A), and 5.0SMDJ70A-T7 (Littelfuse Inc., 5000W / 44.3A).
Substitution is determined by matching the following critical parameters: Voltage - Reverse Standoff (70V), Voltage - Breakdown (77.8V minimum), Voltage - Clamping (113V maximum), Package / Case (DO-214AB, SMC), Mounting Type (Surface Mount), and Unidirectional Channel configuration (1 channel).
Parameter Comparison
| Part Number | Manufacturer | Standoff Voltage (V) | Breakdown Voltage (V) | Clamping Voltage (V) | Peak Pulse Current (A) | Peak Power (W) | Operating Temp (°C) | Packaging | RoHS3 |
|---|---|---|---|---|---|---|---|---|---|
| SMCJ70A-M3/9AT | Vishay | 70 | 77.8 | 113 | 13.3 | 1500 | -55 to 150 | Tape & Reel | Compliant |
| SMCJ70A-E3/57T | Vishay | 70 | 77.8 | 113 | 13.3 | 1500 | -55 to 150 | Cut Tape & Digi-Reel | Compliant |
| SMCJ70A | Meritek | 70 | 77.8 | 113 | 13.27 | 1500 | -55 to 150 | Tape & Reel | Compliant |
| SMCJ70A-TP | Micro Commercial Co | 70 | 77.8 | 113 | 13.3 | 1500 | -55 to 175 | Tape & Reel | Compliant |
| SMDJ70A | Alpha & Omega Semiconductor | 70 | 77.8 | 113 | 26.6 | 3000 | -55 to 150 | Tape & Reel | Compliant |
| 5.0SMDJ70A | Taiwan Semiconductor Corporation | 70 | 77.8 | 113 | 44.3 | 5000 | -55 to 175 | Tape & Reel | Compliant |
| 5.0SMDJ70A-T7 | Littelfuse Inc. | 70 | 77.8 | 113 | 44.3 | 5000 | -65 to 150 | Tape & Reel | Compliant |
Engineering Selection Recommendations
All listed substitute parts maintain active product status and full RoHS3 compliance, meeting regulatory requirements for current applications. Selection between Category 1 (1500W) and Category 2 (3000W–5000W) alternatives depends on circuit transient energy requirements.
For direct replacement in existing designs, Category 1 parts (SMCJ70A-E3/57T, SMCJ70A, SMCJ70A-TP) provide electrical equivalence with identical power ratings. These parts are suitable when the original 1500W specification is sufficient for the application.
Category 2 parts (SMDJ70A, 5.0SMDJ70A, 5.0SMDJ70A-T7) offer increased transient suppression capability through higher peak pulse current and power dissipation. These alternatives are appropriate for applications experiencing higher energy transients or requiring design margin enhancement. The 5.0SMDJ70A-T7 variant extends the lower operating temperature limit to -65°C, providing broader environmental coverage.
Packaging format differences (Tape & Reel vs. Cut Tape & Digi-Reel) do not affect electrical performance and are determined by assembly process requirements and inventory management practices.
Frequently Asked Questions (FAQ)
Q: Can SMCJ70A-E3/57T replace SMCJ70A-M3/9AT directly? A: Yes. Both parts share identical electrical specifications (70V standoff, 113V clamping, 13.3A peak pulse, 1500W power rating) and the same DO-214AB SMC package. The difference is packaging format: SMCJ70A-E3/57T uses Cut Tape & Digi-Reel while SMCJ70A-M3/9AT uses Tape & Reel. Electrical performance is equivalent.
Q: What is the difference between 1500W and 3000W/5000W rated parts? A: Peak pulse current and power dissipation capacity differ. The SMCJ70A-M3/9AT handles 13.3A at 1500W. The SMDJ70A handles 26.6A at 3000W. The 5.0SMDJ70A and 5.0SMDJ70A-T7 handle 44.3A at 5000W. All maintain the same voltage clamping characteristics (113V maximum). Higher-rated parts provide greater transient energy absorption capability.
Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts carry RoHS3 compliance certification, meeting current regulatory requirements for hazardous substance restrictions.
Q: Does operating temperature range affect substitution? A: Operating temperature range is a design consideration but does not prevent substitution. SMCJ70A-M3/9AT operates -55°C to 150°C. SMCJ70A-TP extends to 175°C. The 5.0SMDJ70A-T7 extends the lower limit to -65°C. Selection depends on the application's thermal environment.
Q: Can Meritek SMCJ70A substitute for Vishay SMCJ70A-M3/9AT? A: Yes. The Meritek SMCJ70A maintains the same electrical specifications with peak pulse current of 13.27A (within tolerance of the 13.3A specification). Both use DO-214AB SMC packaging and Tape & Reel format. Manufacturer source differs but electrical performance is equivalent.
Q: What does "unidirectional" mean in the context of these TVS diodes? A: Unidirectional TVS diodes provide transient voltage suppression in one direction only. The single channel configuration protects against transients in one polarity. This differs from bidirectional TVS diodes, which suppress transients in both polarities.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts