SMCJ70A-13 Equivalent & Substitute Parts

Part Overview

The SMCJ70A-13 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Diodes Incorporated, designed for general-purpose overvoltage protection in surface-mount applications. This component features a 70V reverse standoff voltage, 113V maximum clamping voltage, and 1500W peak pulse power rating in a DO-214AB (SMC) package. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active manufacturers to maintain design continuity and ensure supply chain availability.

Key Parameters

Parameter	Value	Unit
Type	Zener TVS Diode	—
Unidirectional Channels	1	—
Voltage - Reverse Standoff (Typ)	70V	V
Voltage - Breakdown (Min)	77.8V	V
Voltage - Clamping (Max) @ Ipp	113V	V
Current - Peak Pulse (10/1000µs)	13.3A	A
Power - Peak Pulse	1500W	W
Mounting Type	Surface Mount	—
Package / Case	DO-214AB, SMC	—
Operating Temperature	-55°C ~ 150°C	°C

Substitute Part Grouping Explanation

Substitution eligibility for the SMCJ70A-13 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria (Must Match):

Unidirectional Channels: 1
Voltage - Reverse Standoff (Typ): 70V (±tolerance)
Voltage - Breakdown (Min): 77.8V (±tolerance)
Voltage - Clamping (Max) @ Ipp: 113V (±tolerance)
Package / Case: DO-214AB, SMC
Mounting Type: Surface Mount

Secondary Substitution Criteria (Allowable Variation):

Current - Peak Pulse (10/1000µs): 13.3A or higher
Power - Peak Pulse: 1500W or higher
Operating Temperature: -55°C minimum to 150°C minimum

Substitute parts are grouped into two categories:

Category A - Direct Electrical Equivalents (1:1 Replacement): Parts matching all primary criteria with peak pulse current and power within ±10% of the original specification. These parts are pin-compatible and require no circuit modifications.

Category B - Enhanced Performance Equivalents: Parts matching all primary criteria but with higher peak pulse current and power ratings. These parts provide superior transient protection capability and are backward-compatible with the original design.

Parameter Comparison

Part Number	Manufacturer	VWM (Typ) [V]	VBR (Min) [V]	VC (Max) [V]	Ipp (10/1000µs) [A]	Power [W]	Temp Range [°C]	Package	Status	RoHS
SMCJ70A-13	Diodes Incorporated	70	77.8	113	13.3	1500	-55 ~ 150	DO-214AB, SMC	Discontinued	Non-compliant
SMCJ70A	Meritek	70	77.8	113	13.27	1500	-55 ~ 150	DO-214AB, SMC	Active	ROHS3 Compliant
SMCJ70A-TP	Micro Commercial Co	70	77.8	113	13.3	1500	-55 ~ 175	DO-214AB, SMC	Active	ROHS3 Compliant
1.5SMC82A	Taiwan Semiconductor Corporation	70.1	77.9	113	13.9	1500	-55 ~ 150	DO-214AB, SMC	Active	ROHS3 Compliant
SMDJ70A	Alpha & Omega Semiconductor Inc.	70	77.8	113	26.6	3000	-55 ~ 150	DO-214AB, SMC	Active	ROHS3 Compliant
SMLJ70A	Bourns Inc.	70	77.8	113	26.6	3000	-55 ~ 150	DO-214AB, SMC	Active	ROHS3 Compliant
5.0SMDJ70A	Taiwan Semiconductor Corporation	70	77.8	113	44.3	5000	-55 ~ 175	DO-214AB, SMC	Active	ROHS3 Compliant
5.0SMDJ70A-T7	Littelfuse Inc.	70	77.8	113	44.3	5000	-65 ~ 150	DO-214AB, SMC	Active	ROHS3 Compliant

Engineering Selection Recommendations

Direct Replacement (Category A):

SMCJ70A (Meritek) and SMCJ70A-TP (Micro Commercial Co) are the primary direct replacements for SMCJ70A-13. Both maintain identical electrical specifications within tolerance and are available in active production status. SMCJ70A-TP offers an extended operating temperature range (-55°C to 175°C) compared to the original specification (-55°C to 150°C), providing additional thermal margin. Both alternatives are ROHS3 compliant, addressing regulatory requirements that the original discontinued part did not meet.

1.5SMC82A (Taiwan Semiconductor Corporation) is functionally equivalent with negligible voltage parameter variation (70.1V vs. 70V standoff, 77.9V vs. 77.8V breakdown) and slightly elevated peak pulse current (13.9A vs. 13.3A). This part is suitable for direct substitution and is actively manufactured.

Enhanced Performance Alternatives (Category B):

SMDJ70A (Alpha & Omega Semiconductor Inc.) and SMLJ70A (Bourns Inc.) provide doubled peak pulse current (26.6A) and power dissipation (3000W) while maintaining identical voltage clamping characteristics. These parts are backward-compatible and offer superior transient suppression capability for designs requiring enhanced protection margins.

5.0SMDJ70A (Taiwan Semiconductor Corporation) and 5.0SMDJ70A-T7 (Littelfuse Inc.) provide the highest performance tier with 44.3A peak pulse current and 5000W power dissipation. 5.0SMDJ70A-T7 extends the lower operating temperature limit to -65°C, suitable for extreme cold-environment applications.

All recommended substitutes are ROHS3 compliant and actively produced, ensuring long-term supply chain stability.

Frequently Asked Questions (FAQ)

Q: Can SMCJ70A-13 be replaced with SMDJ70A or SMLJ70A?

A: Yes. SMDJ70A and SMLJ70A maintain identical voltage parameters (70V standoff, 77.8V breakdown, 113V clamping) and package configuration (DO-214AB, SMC). The increased peak pulse current (26.6A vs. 13.3A) and power rating (3000W vs. 1500W) represent enhanced performance characteristics that are fully backward-compatible with the original design. No circuit modifications are required.

Q: What is the difference between SMCJ70A and SMCJ70A-TP?

A: Both parts are electrically identical with matching voltage and current specifications. The primary difference is operating temperature range: SMCJ70A-TP extends to 175°C junction temperature compared to 150°C for standard SMCJ70A. SMCJ70A-TP is manufactured by Micro Commercial Co, while SMCJ70A is available from Meritek. Both are ROHS3 compliant and actively produced.

Q: Are 5.0SMDJ70A and 5.0SMDJ70A-T7 interchangeable?

A: Yes, with one consideration. Both parts share identical electrical specifications and package configuration. 5.0SMDJ70A-T7 (Littelfuse) extends the lower operating temperature to -65°C compared to -55°C for 5.0SMDJ70A (Taiwan Semiconductor Corporation). Selection depends on application temperature requirements. Both are suitable for SMCJ70A-13 replacement.

Q: Does the DO-214AB package differ between manufacturers?

A: No. DO-214AB (SMC) is a standardized surface-mount package specification. All listed substitute parts use identical package dimensions and pin configuration, ensuring mechanical and electrical compatibility without PCB layout modifications.

Q: Why is SMCJ70A-13 discontinued while alternatives remain in production?

A: The original SMCJ70A-13 from Diodes Incorporated is non-ROHS compliant. Regulatory requirements and market consolidation have shifted production to ROHS3-compliant alternatives from active manufacturers. All recommended substitutes meet current environmental and compliance standards while maintaining functional equivalence.

Q: Can I use 1.5SMC82A as a direct replacement?

A: Yes. 1.5SMC82A exhibits voltage parameters within acceptable tolerance (70.1V standoff vs. 70V, 77.9V breakdown vs. 77.8V) and maintains the 113V clamping specification. Peak pulse current is slightly elevated at 13.9A. This part is suitable for direct substitution without circuit modifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message