SMCJ45CA-M3/9AT Equivalent & Substitute Parts

Part Overview

The SMCJ45CA-M3/9AT is a bidirectional Transient Voltage Suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates at 45V reverse standoff with a 72.7V maximum clamping voltage and 20.6A peak pulse current rating. The device is packaged in DO-214AB (SMC) format and is designed for general-purpose transient voltage suppression applications. As an active product with ROHS3 compliance and unlimited moisture sensitivity level, equivalent and substitute parts are available from multiple manufacturers to support procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	45	V
Voltage - Breakdown (Min)	50	V
Voltage - Clamping (Max) @ Ipp	72.7	V
Current - Peak Pulse (10/1000µs)	20.6	A
Power - Peak Pulse	1500	W
Operating Temperature Range	-55 to 150	°C
Package / Case	DO-214AB, SMC	-
Mounting Type	Surface Mount	-
Type	Zener	-
Bidirectional Channels	1	-

Substitute Part Grouping Explanation

Substitute parts for the SMCJ45CA-M3/9AT are classified into two categories based on electrical parameter compatibility:

Category 1: Direct Electrical Equivalents These parts maintain identical electrical specifications across all critical parameters: 45V reverse standoff voltage, 50V minimum breakdown voltage, 72.7V maximum clamping voltage, 20.6A peak pulse current, and 1500W peak pulse power rating. All parts in this category are packaged in DO-214AB (SMC) surface mount format and operate across the -55°C to 150°C temperature range. Substitution within this category is based on manufacturer availability and packaging variant (Tape & Reel or Cut Tape).

Category 2: Enhanced Performance Alternatives These parts exceed the electrical specifications of the main part while maintaining the same voltage ratings and package format. They provide higher peak pulse current and power dissipation capabilities, suitable for applications requiring additional transient suppression margin.

Key Parameters Determining Substitution:

Voltage - Reverse Standoff: 45V (fixed)
Voltage - Breakdown (Min): 50V (fixed)
Voltage - Clamping (Max) @ Ipp: 72.7V (fixed)
Package / Case: DO-214AB, SMC (fixed)
Mounting Type: Surface Mount (fixed)
Type: Zener, Bidirectional (fixed)

Parameter Comparison

Part Number	Manufacturer	Voltage - Reverse Standoff (V)	Voltage - Breakdown Min (V)	Voltage - Clamping Max @ Ipp (V)	Current - Peak Pulse (A)	Power - Peak Pulse (W)	Operating Temp (°C)	Package	Packaging Type
SMCJ45CA-M3/9AT	Vishay General Semiconductor - Diodes Division	45	50	72.7	20.6	1500	-55 to 150	DO-214AB, SMC	Tape & Reel
SMCJ45CA-E3/57T	Vishay General Semiconductor - Diodes Division	45	50	72.7	20.6	1500	-55 to 150	DO-214AB, SMC	Tape & Reel
SMCJ45CA	MDD	45	50	72.7	20.6	1500	-50 to 150	DO-214AB, SMC	Tape & Reel
SMCJ45CA-13-F	Diodes Incorporated	45	50	72.7	20.6	1500	-55 to 150	DO-214AB, SMC	Cut Tape & Digi-Reel
SMCJ45CA-TP	Micro Commercial Co	45	50	72.7	20.6	1500	-55 to 175	DO-214AB, SMC	Tape & Reel
5.0SMDJ45CA	MDE Semiconductor Inc	45	50	72.7	68.8	5000	-55 to 150	DO-214AB, SMC	Tape & Reel
SMDJ45CA	Alpha & Omega Semiconductor Inc.	45	50	72.7	41.3	3000	-55 to 150	DO-214AB, SMC	Tape & Reel

Engineering Selection Recommendations

Direct Substitution (Category 1): SMCJ45CA-E3/57T, SMCJ45CA (MDD), SMCJ45CA-13-F, and SMCJ45CA-TP are direct electrical equivalents to the SMCJ45CA-M3/9AT. All parts maintain identical voltage and current specifications with ROHS3 compliance and unlimited moisture sensitivity level. Selection among these parts is determined by packaging availability (Tape & Reel versus Cut Tape) and manufacturer supply. SMCJ45CA-TP offers an extended upper operating temperature limit of 175°C compared to the standard 150°C, providing additional thermal margin for high-temperature applications.

Enhanced Performance Alternatives (Category 2): 5.0SMDJ45CA and SMDJ45CA are manufacturer-recommended alternatives that provide higher peak pulse current and power dissipation ratings while maintaining identical voltage specifications. These parts are suitable for applications requiring greater transient suppression capability or where design margins for peak pulse events are critical. Both parts retain ROHS3 compliance and the same DO-214AB (SMC) package format.

Compliance and Certification: All substitute parts listed maintain ROHS3 compliance, REACH unaffected status, and EAR99 export classification consistent with the main part. Moisture sensitivity level remains at MSL 1 (Unlimited) across all alternatives.

Frequently Asked Questions (FAQ)

Q: Can SMCJ45CA-E3/57T be used as a direct replacement for SMCJ45CA-M3/9AT? A: Yes. Both parts are manufactured by Vishay General Semiconductor - Diodes Division and share identical electrical specifications: 45V reverse standoff, 72.7V clamping voltage, and 20.6A peak pulse current. The difference is in the packaging variant designation (E3/57T versus M3/9AT), which reflects different tape and reel configurations. Both are suitable for direct substitution in surface mount applications.

Q: What is the difference between the direct equivalents and the enhanced performance alternatives? A: Direct equivalents (SMCJ45CA-E3/57T, SMCJ45CA, SMCJ45CA-13-F, SMCJ45CA-TP) maintain the same 20.6A peak pulse current and 1500W power rating as the main part. Enhanced alternatives (5.0SMDJ45CA at 68.8A and SMDJ45CA at 41.3A) provide higher current and power handling capabilities. Selection depends on whether the application requires the baseline specifications or benefits from additional transient suppression margin.

Q: Are there temperature range differences among the substitutes? A: Most substitutes operate across -55°C to 150°C, matching the main part. SMCJ45CA (MDD) operates from -50°C to 150°C, and SMCJ45CA-TP extends to -55°C to 175°C. For applications requiring the full -55°C lower temperature limit, avoid the MDD variant. For high-temperature applications above 150°C, SMCJ45CA-TP is the appropriate choice.

Q: Does packaging type (Tape & Reel versus Cut Tape) affect electrical performance? A: No. Packaging type affects only handling, storage, and automated assembly processes. SMCJ45CA-13-F is supplied in Cut Tape & Digi-Reel format, while other substitutes use standard Tape & Reel. Electrical performance and specifications remain identical regardless of packaging variant.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All listed substitute parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity level, consistent with the main part SMCJ45CA-M3/9AT.

Q: Can I use 5.0SMDJ45CA or SMDJ45CA in place of SMCJ45CA-M3/9AT? A: Yes, with design consideration. Both parts maintain the same voltage specifications (45V reverse standoff, 72.7V clamping) and package format. However, they provide higher peak pulse current (68.8A and 41.3A respectively) and power dissipation (5000W and 3000W). These are suitable substitutes when the application can accommodate the enhanced specifications or when additional transient suppression margin is beneficial.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message