SMCJ43A-M3/9AT Equivalent & Substitute Parts

Part Overview

The SMCJ43A-M3/9AT is a unidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division, operating in the 43V reverse standoff category. This surface mount component in DO-214AB (SMC) package is designed for general-purpose transient voltage suppression applications. The part is active and in production, with 1119 units currently in stock. Equivalent and substitute parts are identified based on matching electrical performance parameters and mechanical compatibility within the TransZorb® and equivalent TVS diode product families.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	43	V
Voltage - Breakdown (Min)	47.8	V
Voltage - Clamping (Max) @ Ipp	69.4	V
Current - Peak Pulse (10/1000µs)	21.6	A
Power - Peak Pulse	1500	W
Operating Temperature Range	-55 to 150	°C
Mounting Type	Surface Mount	-
Package / Case	DO-214AB, SMC	-
Type	Zener	-
Unidirectional Channels	1	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level (MSL)	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitute parts for the SMCJ43A-M3/9AT are classified into three categories based on electrical and mechanical compatibility:

Direct Equivalents maintain identical electrical specifications: 43V reverse standoff, 47.8V minimum breakdown voltage, 69.4V maximum clamping voltage, and 21.6A peak pulse current. These parts differ only in packaging format (Tape & Reel variants) or manufacturer source. Direct equivalents include SMCJ43A-E3/57T, SMCJ43A-E3/9AT, SMCJ43A-13-F, SMCJ43A (MDD), and SMCJ43A-TP.

Upgraded Performance Substitutes provide enhanced current handling or power dissipation while maintaining the same voltage parameters. These include SMDJ43A (3000W, 43.3A), SMLJ43A (3000W, 43.2A), 5.0SMDJ43A (5000W, 72.1A), and 5.0SMDJ43A-T7 (5000W, 72.1A). These parts are suitable when higher transient energy absorption is required within the same voltage class.

Substitution eligibility is determined by:

Voltage - Reverse Standoff: 43V (required match)
Voltage - Clamping (Max) @ Ipp: 69.4V (required match)
Mounting Type: Surface Mount (required match)
Package / Case: DO-214AB, SMC (required match)
Current - Peak Pulse: 21.6A minimum (equal or higher acceptable)
Power - Peak Pulse: 1500W minimum (equal or higher acceptable)

Parameter Comparison

Part Number	Manufacturer	Voltage Standoff (V)	Breakdown Min (V)	Clamping Max (V)	Peak Pulse Current (A)	Peak Power (W)	Temp Range (°C)	Packaging
SMCJ43A-M3/9AT	Vishay	43	47.8	69.4	21.6	1500	-55 to 150	Tape & Reel
SMCJ43A-E3/57T	Vishay	43	47.8	69.4	21.6	1500	-55 to 150	Cut Tape & Digi-Reel
SMCJ43A-E3/9AT	Vishay	43	47.8	69.4	21.6	1500	-55 to 150	Tape & Reel
SMCJ43A-13-F	Diodes Incorporated	43	47.8	69.4	21.6	1500	-55 to 150	Tape & Reel
SMCJ43A	MDD	43	47.8	69.4	21.7	1500	-50 to 150	-
SMCJ43A-TP	Micro Commercial Co	43	47.8	69.4	21.7	1500	-55 to 175	Tape & Reel
SMDJ43A	Alpha & Omega Semiconductor	43	47.8	69.4	43.3	3000	-55 to 150	Tape & Reel
SMLJ43A	Bourns Inc.	43	47.8	69.4	43.2	3000	-55 to 150	Tape & Reel
5.0SMDJ43A	Taiwan Semiconductor Corporation	43	47.8	69.4	72.1	5000	-55 to 175	Tape & Reel
5.0SMDJ43A-T7	Littelfuse Inc.	43	47.8	69.4	72.1	5000	-65 to 150	Tape & Reel

Engineering Selection Recommendations

Direct Equivalent Selection: SMCJ43A-E3/57T, SMCJ43A-E3/9AT, SMCJ43A-13-F, SMCJ43A-TP, and SMCJ43A (MDD) are functionally equivalent to the SMCJ43A-M3/9AT. All are active products with ROHS3 compliance and MSL 1 rating. Selection among these direct equivalents depends on packaging availability and supply chain requirements. SMCJ43A-E3/57T offers the highest inventory (34,400 units) and is suitable for high-volume applications.

Upgraded Performance Selection: When circuit design permits higher current handling or power dissipation, SMDJ43A, SMLJ43A, 5.0SMDJ43A, and 5.0SMDJ43A-T7 provide enhanced protection margins. SMLJ43A (Bourns) offers 3000W capability with 13,032 units in stock and is suitable for applications requiring increased transient energy absorption. The 5.0SMDJ series (5000W) is appropriate for high-energy transient environments and telecom applications.

Compliance Verification: All substitute parts maintain ROHS3 compliance and EAR99 export classification. SMLJ43A carries REACH Affected status, requiring verification against specific application requirements. All other substitutes maintain REACH Unaffected status.

Temperature Range Considerations: The original SMCJ43A-M3/9AT operates from -55°C to 150°C. SMCJ43A-TP extends the upper limit to 175°C, and 5.0SMDJ43A extends to 175°C as well. 5.0SMDJ43A-T7 extends the lower limit to -65°C, suitable for extreme cold environment applications.

Frequently Asked Questions (FAQ)

Q: Can SMCJ43A-E3/57T replace SMCJ43A-M3/9AT directly? A: Yes. Both parts share identical electrical specifications (43V standoff, 69.4V clamping, 21.6A peak pulse, 1500W peak power) and DO-214AB SMC package. The difference is packaging format: E3/57T uses Cut Tape & Digi-Reel while M3/9AT uses standard Tape & Reel. Verify your assembly equipment compatibility with the packaging format.

Q: What is the difference between direct equivalents and upgraded performance substitutes? A: Direct equivalents (SMCJ43A series) maintain identical current and power ratings (21.6A, 1500W). Upgraded substitutes (SMDJ43A, SMLJ43A, 5.0SMDJ series) provide higher peak pulse current and power dissipation (43A-72A, 3000W-5000W) while maintaining the same voltage protection levels. Upgraded parts are suitable when circuit transient energy exceeds the original design specification.

Q: Are all substitute parts in the same DO-214AB SMC package? A: Yes. All listed substitute parts use DO-214AB (SMC) surface mount package, ensuring mechanical and thermal compatibility with the original SMCJ43A-M3/9AT footprint.

Q: Which substitute offers the best inventory availability? A: SMCJ43A-E3/57T (Vishay) provides the highest inventory at 34,400 units. SMLJ43A (Bourns) offers 13,032 units for upgraded performance applications.

Q: Can I use SMDJ43A or SMLJ43A as a direct replacement? A: Yes, with design verification. Both parts maintain identical voltage parameters (43V standoff, 69.4V clamping) and package format. However, they provide 3000W peak power versus the original 1500W. This higher capability does not create compatibility issues but may affect circuit thermal management design. Verify PCB thermal design accommodates the higher power dissipation if needed.

Q: What is the temperature range difference between substitutes? A: The original SMCJ43A-M3/9AT operates -55°C to 150°C. SMCJ43A-TP and 5.0SMDJ43A extend to 175°C. 5.0SMDJ43A-T7 extends the lower limit to -65°C. Select based on your application's thermal environment requirements.

Q: Are there any compliance differences between substitutes? A: All parts are ROHS3 compliant and EAR99 classified. SMLJ43A (Bourns) is REACH Affected, while all others are REACH Unaffected. Verify REACH compliance requirements for your specific application and end market.

Q: Can I mix different substitute part numbers in the same production batch? A: Direct equivalents (SMCJ43A variants) are interchangeable. Upgraded performance parts (SMDJ43A, SMLJ43A, 5.0SMDJ series) should not be mixed with original or direct equivalent parts in the same assembly without design review, as they have different current and power ratings that may affect circuit behavior.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message