SMCJ33CA-M3/57T Equivalent & Substitute Parts

Part Overview

The SMCJ33CA-M3/57T is a bidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the 33V reverse standoff category with a 53.3V maximum clamping voltage and 28.1A peak pulse current rating. The device is designed for general-purpose transient protection applications and maintains active product status with full RoHS3 compliance. Equivalent and substitute parts are identified based on matching electrical performance parameters and mechanical compatibility within the DO-214AB (SMC) package family.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	33	V
Voltage - Breakdown (Min)	36.7	V
Voltage - Clamping (Max) @ Ipp	53.3	V
Current - Peak Pulse (10/1000µs)	28.1	A
Power - Peak Pulse	1500	W
Type	Zener	-
Bidirectional Channels	1	-
Package / Case	DO-214AB, SMC	-
Mounting Type	Surface Mount	-
Operating Temperature	-55 to 150	°C
RoHS Status	ROHS3 Compliant	-
MSL Rating	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution eligibility for the SMCJ33CA-M3/57T is determined by the following critical parameters:

Voltage - Reverse Standoff: 33V (exact match required)
Voltage - Clamping (Max) @ Ipp: 53.3V (exact match required)
Current - Peak Pulse: 28.1A minimum (equal or higher acceptable)
Power - Peak Pulse: 1500W minimum (equal or higher acceptable)
Package / Case: DO-214AB, SMC (exact match required)
Type: Zener, Bidirectional (exact match required)
Mounting Type: Surface Mount (exact match required)

Substitute parts are grouped into two categories:

Direct Equivalents (Identical Electrical & Mechanical Specifications): Parts with matching voltage ratings, clamping characteristics, and peak pulse current of 28.1A within the same DO-214AB SMC package.

Higher-Performance Alternatives (Enhanced Current/Power Ratings): Parts with identical voltage specifications but higher peak pulse current (56.3A or 93.9A) and correspondingly higher power dissipation (3000W or 5000W), suitable for applications requiring additional transient protection margin.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Voltage - Reverse Standoff (V)	Voltage - Clamping (V)	Current - Peak Pulse (A)	Power - Peak Pulse (W)	Package	Operating Temp (°C)	RoHS Status
SMCJ33CA-M3/57T	Vishay	33	53.3	28.1	1500	DO-214AB, SMC	-55 to 150	ROHS3
SMCJ33CA-E3/57T	Vishay	33	53.3	28.1	1500	DO-214AB, SMC	-55 to 150	ROHS3
SMCJ33CA-E3/9AT	Vishay	33	53.3	28.1	1500	DO-214AB, SMC	-55 to 150	ROHS3
1SMC33CA TR13 PBFREE	Central Semiconductor Corp	33	53.3	28.1	1500	DO-214AB, SMC	-65 to 150	ROHS3
SMCJ33CA	MDD	33	53.3	28.2	1500	DO-214AB, SMC	-50 to 150	ROHS3
SMCJ33CA-13-F	Diodes Incorporated	33	53.3	28.1	1500	DO-214AB, SMC	-55 to 150	ROHS3
5.0SMDJ33CA	HY Electronic (Cayman) Limited	33	53.3	93.9	5000	DO-214AB, SMC	-65 to 150	ROHS3
SMDJ33CA-HR	Littelfuse Inc.	33	53.3	56.3	3000	DO-214AB, SMC	-65 to 150	ROHS3
SMDJ33CA-T7	Littelfuse Inc.	33	53.3	56.3	3000	DO-214AB, SMC	-65 to 150	ROHS3

Engineering Selection Recommendations

All listed substitute parts maintain active product status and full RoHS3 compliance, meeting regulatory requirements equivalent to the SMCJ33CA-M3/57T.

Direct Equivalents: SMCJ33CA-E3/57T, SMCJ33CA-E3/9AT, 1SMC33CA TR13 PBFREE, SMCJ33CA (MDD), and SMCJ33CA-13-F provide identical electrical performance with 28.1A peak pulse current and 1500W power dissipation. These parts differ only in packaging format (Tape & Reel vs. Cut Tape) and minor temperature range variations. Selection among direct equivalents depends on procurement packaging requirements and inventory availability.

Higher-Performance Alternatives: SMDJ33CA-HR and SMDJ33CA-T7 (Littelfuse) provide 56.3A peak pulse current with 3000W power dissipation. The 5.0SMDJ33CA (HY Electronic) provides 93.9A peak pulse current with 5000W power dissipation. These alternatives maintain identical voltage specifications and package compatibility while offering enhanced transient suppression capability. Selection of higher-performance variants is appropriate for applications with severe transient environments or where additional design margin is required.

Frequently Asked Questions (FAQ)

Q: Can SMCJ33CA-E3/57T directly replace SMCJ33CA-M3/57T?

A: Yes. Both parts share identical electrical specifications (33V reverse standoff, 53.3V clamping, 28.1A peak pulse current, 1500W power dissipation) and DO-214AB SMC package. The difference is packaging format: E3/57T uses Cut Tape & Digi-Reel format while M3/57T uses Tape & Reel format. Electrical performance and mechanical fit are equivalent.

Q: What is the difference between direct equivalents and higher-performance alternatives?

A: Direct equivalents (SMCJ33CA variants, 1SMC33CA, SMCJ33CA-13-F) maintain the 28.1A peak pulse current and 1500W power rating of the original part. Higher-performance alternatives (SMDJ33CA-HR, SMDJ33CA-T7, 5.0SMDJ33CA) provide increased peak pulse current (56.3A or 93.9A) and power dissipation (3000W or 5000W) while maintaining identical voltage protection levels. Higher-performance parts are suitable for applications requiring additional transient margin.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 compliance certification, meeting regulatory requirements equivalent to the SMCJ33CA-M3/57T.

Q: Does operating temperature range affect substitution eligibility?

A: Operating temperature range does not disqualify substitution. The SMCJ33CA-M3/57T operates -55°C to 150°C. Substitute parts with extended ranges (-65°C to 150°C) or narrower ranges (-50°C to 150°C) remain electrically compatible. Application requirements determine whether extended temperature capability is necessary.

Q: Can I use a higher-performance TVS diode as a substitute?

A: Yes. Higher-performance variants (SMDJ33CA-HR, SMDJ33CA-T7, 5.0SMDJ33CA) with increased peak pulse current and power dissipation are functionally compatible substitutes. They provide identical voltage protection with enhanced transient suppression capability. No circuit modification is required.

Q: What packaging formats are available for equivalent parts?

A: Equivalent parts are available in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel formats. All maintain the same DO-214AB SMC mechanical package for surface mount assembly. Selection depends on procurement and assembly process requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message