SMBJ7.0E3/TR13 Equivalent & Substitute Parts

Part Overview

The SMBJ7.0E3/TR13 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Microchip Technology, designed for general-purpose overvoltage protection in surface-mount applications. This component is active and widely available in inventory (985 pcs). Finding alternative models is necessary when source availability is limited, supply chain constraints occur, or alternative manufacturers offer equivalent performance characteristics at different pricing or lead times.

Key Parameters

Parameter	Value
Manufacturer Part Number	SMBJ7.0E3/TR13
Manufacturer	Microchip Technology
Category	Transient Voltage Suppressors (TVS)
Package / Case	DO-214AA, SMB
Voltage - Reverse Standoff (Typ)	7V
Voltage - Breakdown (Min)	7.78V
Voltage - Clamping (Max) @ Ipp	13.3V
Current - Peak Pulse (10/1000µs)	45.1A
Power - Peak Pulse	600W
Operating Temperature Range	-65°C ~ 150°C (TJ)
Mounting Type	Surface Mount
Product Status	Active
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute components for the SMBJ7.0E3/TR13 must meet the following electrical and mechanical criteria:

Required Parameters for Substitution:

Package / Case: DO-214AA, SMB (surface-mount form factor)
Voltage - Reverse Standoff (Typ): 7V nominal
Voltage - Breakdown (Min): ≥ 7.78V
Voltage - Clamping (Max) @ Ipp: Within acceptable circuit margin (12V–13.3V range)
Current - Peak Pulse (10/1000µs): ≥ 45.1A
Power - Peak Pulse: 600W
Mounting Type: Surface Mount
RoHS Status: ROHS3 Compliant

All substitute parts listed are unidirectional zener-type TVS diodes with equivalent electrical characteristics and identical packaging, enabling direct footprint compatibility.

Parameter Comparison

Parameter	SMBJ7.0E3/TR13 (Main)	P6SMB8.2A	SMBJ7.0A	SMBJ7.0A-13-F	SMBJ7.0A-TP
Manufacturer	Microchip Technology	Taiwan Semiconductor Corporation	MDD	Diodes Incorporated	Micro Commercial Co
Voltage - Reverse Standoff (Typ)	7V	7.02V	7V	7V	7V
Voltage - Breakdown (Min)	7.78V	7.79V	7.78V	7.78V	7.78V
Voltage - Clamping (Max) @ Ipp	13.3V	12.1V	12V	12V	12V
Current - Peak Pulse (10/1000µs)	45.1A	52A	50A	50A	50A
Power - Peak Pulse	600W	600W	600W	600W	600W
Operating Temperature Range	-65°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)	-50°C ~ 150°C (TJ)	-55°C ~ 150°C (TJ)	-55°C ~ 175°C (TJ)
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active
Inventory Availability	985 Pcs	3400 Pcs	15665 Pcs	18100 Pcs	15300 Pcs

Engineering Selection Recommendations

Product Status Compliance: All substitute parts maintain Active status with full ROHS3 compliance and REACH unaffected designation, ensuring no regulatory constraints for component selection.

Voltage Clamping Consideration: The primary distinction among substitutes is clamping voltage. The SMBJ7.0E3/TR13 features a maximum clamping voltage of 13.3V, while all substitute parts clamp at 12V or 12.1V. This represents a lower clamping voltage that provides tighter voltage control. Selection depends on circuit tolerance requirements: if the protected circuit requires clamping at 13.3V maximum, the original part or close-tolerance alternatives must be verified. If circuit design accommodates 12V clamping, substitute parts provide equivalent or superior performance through higher peak pulse current (50–52A versus 45.1A).

Temperature Range: The SMBJ7.0A-TP offers extended operating temperature capability (-55°C ~ 175°C) compared to the original specification (-65°C ~ 150°C), providing margin in high-temperature applications. The SMBJ7.0A from MDD has the most restricted range (-50°C ~ 150°C). Selection should account for actual operating temperature requirements.

Inventory Availability: Multiple substitute parts offer substantially higher stock levels, improving supply chain flexibility.

Frequently Asked Questions (FAQ)

Q: Can SMBJ7.0A directly replace SMBJ7.0E3/TR13?

A: Yes, with circuit voltage verification. Both parts share identical reverse standoff voltage (7V) and breakdown voltage (7.78V). The primary difference is clamping voltage: SMBJ7.0A clamps at 12V versus 13.3V on the original. This is acceptable if circuit design tolerance permits 12V clamping; otherwise, component selection must be adjusted for the application.

Q: What is the significance of the voltage clamping difference between parts?

A: Clamping voltage determines the maximum voltage experienced by protected circuitry during transient events. Lower clamping voltage (12V) provides tighter protection; higher clamping voltage (13.3V) allows greater voltage transience. Circuit design specifications will indicate which range is acceptable.

Q: Are P6SMB8.2A and SMBJ7.0 equivalent?

A: P6SMB8.2A is functionally compatible but has a slightly higher reverse standoff voltage (7.02V) and lower clamping voltage (12.1V) than SMBJ7.0E3/TR13. It offers higher peak pulse current (52A). Compatibility depends on specific circuit tolerance margins.

Q: Do all substitute parts use the same package?

A: Yes. All substitute parts use DO-214AA (SMB) surface-mount packaging, enabling direct footprint compatibility without PCB redesign.

Q: Are all parts RoHS compliant?

A: Yes. All parts listed maintain ROHS3 compliance and REACH unaffected status, suitable for applications with environmental or regulatory requirements.

Q: What temperature range should I use for selection?

A: Consult your circuit's operating temperature specification. SMBJ7.0A-TP offers the widest range (-55°C ~ 175°C). The original SMBJ7.0E3/TR13 specifies -65°C ~ 150°C. Verify that substitute part temperature rating encompasses your application's requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message