SMBJ6.0CA-M3/52 Equivalent & Substitute Parts

Part Overview

The SMBJ6.0CA-M3/52 is a bidirectional Transient Voltage Suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the 6V reverse standoff category with a 10.3V maximum clamping voltage and 58.3A peak pulse current rating. The device is classified as Active product status and is ROHS3 compliant. Equivalent and substitute parts are identified based on matching electrical performance parameters, package compatibility, and manufacturing certifications to ensure direct circuit board replacement capability.

Substiute Parts

SMBJ6.0CA-M3/52

Vishay General Semiconductor - Diodes DivisionIn Stock: 939SMBJ6.0CA-M3/52 Datasheet

Current PartRFQ

SMBJ6.0CD-M3/H

Vishay General Semiconductor - Diodes DivisionIn Stock: 29384SMBJ6.0CD-M3/H Datasheet

DirectRFQ

SMBJ6.0CA-E3/52

Vishay General Semiconductor - Diodes DivisionIn Stock: 29870SMBJ6.0CA-E3/52 Datasheet

MFR RecommendedRFQ

SMBJ6.0CA

EVVO SemiIn Stock: 95335SMBJ6.0CA Datasheet

DirectRFQ

SMBJ6.0CA-13-F

Diodes IncorporatedIn Stock: 4118SMBJ6.0CA-13-F Datasheet

DirectRFQ

SMBJ6V0CA

Taiwan Semiconductor CorporationIn Stock: 9362SMBJ6V0CA Datasheet

DirectRFQ

P6SMBJ6.0CA_R1_00001

Panjit International Inc.In Stock: 8029P6SMBJ6.0CA_R1_00001 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SMBJ6.0CA-M3/52 are qualified based on the following electrical and mechanical criteria:

Critical Matching Parameters:

• Voltage - Reverse Standoff (Typ): 6V
• Voltage - Clamping (Max) @ Ipp: 10.3V (±0.1V tolerance acceptable)
• Current - Peak Pulse (10/1000µs): 58.3A (±0.6A tolerance acceptable)
• Power - Peak Pulse: 600W
• Package / Case: DO-214AA or SMB equivalent
• Mounting Type: Surface Mount
• Type: Zener, Bidirectional, 1 Channel
• Operating Temperature Range: -55°C to 150°C minimum
• RoHS Status: ROHS3 Compliant

All substitute parts listed maintain these electrical specifications and package compatibility, enabling direct replacement in circuit applications without design modification.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain Active product status and ROHS3 compliance, meeting regulatory and supply chain requirements. Selection among equivalent parts should be based on:

Packaging Format: SMBJ6.0CA-E3/52 is supplied in Cut Tape (CT) & Digi-Reel® format, while SMBJ6.0CA-M3/52 is supplied in Tape & Reel (TR). Both formats are compatible for automated assembly processes.

Manufacturer Availability: Vishay General Semiconductor - Diodes Division parts (SMBJ6.0CA-M3/52, SMBJ6.0CD-M3/H, SMBJ6.0CA-E3/52) represent the original design source. Alternative manufacturers (EVVO Semi, Diodes Incorporated, Taiwan Semiconductor Corporation, Panjit International Inc.) provide functionally equivalent devices with identical electrical performance.

Temperature Range Consideration: SMBJ6.0CA from EVVO Semi extends the lower operating temperature to -65°C, providing enhanced performance in extreme cold environments compared to the -55°C minimum of other variants.

Clamping Voltage Tolerance: SMBJ6.0CD-M3/H exhibits a 10.2V maximum clamping voltage versus 10.3V for other parts, representing a 0.1V reduction within acceptable engineering tolerance for TVS applications.

Frequently Asked Questions (FAQ)

Q: Can SMBJ6.0CD-M3/H replace SMBJ6.0CA-M3/52 directly?

A: Yes. The SMBJ6.0CD-M3/H maintains identical reverse standoff voltage (6V), peak pulse current (58.9A), and power rating (600W). The clamping voltage difference of 0.1V (10.2V vs. 10.3V) falls within acceptable engineering tolerance for transient voltage suppression applications.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Both packaging formats contain the same electronic component in DO-214AA (SMB) package. Tape & Reel is optimized for high-volume automated assembly, while Cut Tape & Digi-Reel® provides flexibility for lower-volume or mixed-component production runs. Package selection depends on manufacturing process requirements, not electrical performance.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts carry ROHS3 Compliant certification, meeting environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: Does the EVVO Semi SMBJ6.0CA offer any advantage over the Vishay original?

A: The EVVO Semi variant extends the operating temperature range to -65°C (versus -55°C for Vishay), providing enhanced performance in applications requiring operation at lower temperatures. Electrical performance and package compatibility remain identical.

Q: Can I mix manufacturers in the same circuit board assembly?

A: Yes. All substitute parts meet identical electrical specifications (6V reverse standoff, 10.3V clamping, 58.3A peak pulse current) and package requirements (DO-214AA, SMB surface mount). Multiple manufacturers can be used interchangeably within the same design without circuit modification.

Q: What certifications apply to all substitute parts?

A: All parts are ROHS3 Compliant, carry Moisture Sensitivity Level (MSL) 1 (Unlimited), and hold Active product status. REACH and ECCN classifications are consistent across all variants.