SMBJ60A-M3/52 Equivalent & Substitute Parts

Part Overview

The SMBJ60A-M3/52 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the 60V reverse standoff category and provides 600W peak pulse power dissipation for general-purpose transient protection applications. The part is active in production status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent and substitute parts are identified to support design flexibility, supply chain continuity, and manufacturing optimization while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	60	V
Voltage - Breakdown (Min)	66.7	V
Voltage - Clamping (Max) @ Ipp	96.8	V
Current - Peak Pulse (10/1000µs)	6.2	A
Power - Peak Pulse	600	W
Operating Temperature Range	-55 to 150	°C (TJ)
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
Type	Zener	—
Unidirectional Channels	1	—
RoHS Status	ROHS3 Compliant	—
MSL Rating	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the SMBJ60A-M3/52 are classified into two categories based on electrical parameter alignment:

Category 1: Direct Electrical Equivalents (60V Standoff) Parts maintaining identical or near-identical reverse standoff voltage (60V), breakdown voltage (66.7V minimum), clamping voltage (96.8V maximum), and peak pulse current (6.2A) specifications. These parts are interchangeable in applications requiring the same transient protection threshold and response characteristics. Included parts: SMBJ60D-M3/H, SMBJ60A-E3/52, SMBJ60A (MDD), and SMBJ60A-13-F (Diodes Incorporated).

Category 2: Related Voltage Series (51V and 58V Standoff) Parts with lower reverse standoff voltages (51V or 58V) that operate within the same product family and package format. These are suitable for applications with lower transient voltage requirements but require circuit-level validation. Included parts: SMBJ51A (Good-Ark Semiconductor) and SMBJ58A (Meritek).

All substitute parts share the following mandatory compatibility criteria: unidirectional Zener diode type, single channel configuration, DO-214AA/SMB surface mount package, 600W peak pulse power rating, -55°C to 150°C operating temperature range, RoHS3 compliance, and MSL 1 rating.

Parameter Comparison

Part Number	Manufacturer	Vwm (V)	Vbr Min (V)	Vc Max @ Ipp (V)	Ipp (A)	Ppk (W)	Tj Range (°C)	Package	Status
SMBJ60A-M3/52	Vishay	60	66.7	96.8	6.2	600	-55 to 150	DO-214AA (SMB)	Active
SMBJ60D-M3/H	Vishay	60	67.7	95.5	6.28	600	-55 to 150	DO-214AA (SMB)	Active
SMBJ60A-E3/52	Vishay	60	66.7	96.8	6.2	600	-55 to 150	DO-214AA (SMB)	Active
SMBJ60A	MDD	60	66.7	96.8	6.2	600	-50 to 150	DO-214AA (SMB)	Active
SMBJ60A-13-F	Diodes Incorporated	60	66.7	96.8	6.2	600	-55 to 150	DO-214AA (SMB)	Active
SMBJ51A	Good-Ark Semiconductor	51	56.7	82.4	7.3	600	-55 to 150	DO-214AA (SMB)	Active
SMBJ58A	Meritek	58	64.4	93.6	6.41	600	-55 to 150	DO-214AA (SMB)	Active

Engineering Selection Recommendations

Primary Substitutes (Direct Equivalents)

SMBJ60D-M3/H, SMBJ60A-E3/52, SMBJ60A (MDD), and SMBJ60A-13-F maintain the 60V reverse standoff specification and are suitable for direct replacement in existing designs. All are active production parts with RoHS3 compliance and MSL 1 rating. The SMBJ60A-E3/52 (Vishay) and SMBJ60A-13-F (Diodes Incorporated) are manufacturer-recommended alternatives with identical electrical characteristics to the main part. The SMBJ60D-M3/H (Vishay) exhibits marginally lower clamping voltage (95.5V vs. 96.8V) and slightly higher peak pulse current (6.28A vs. 6.2A), representing acceptable variation within the 60V series. The MDD SMBJ60A operates across a narrower temperature range (-50°C to 150°C vs. -55°C to 150°C) and should be evaluated for applications requiring full -55°C operation.

Secondary Substitutes (Related Voltage Series)

SMBJ51A and SMBJ58A are suitable only for applications where lower transient voltage thresholds are acceptable. The SMBJ51A operates at 51V reverse standoff with 82.4V clamping voltage and 7.3A peak pulse current. The SMBJ58A operates at 58V reverse standoff with 93.6V clamping voltage and 6.41A peak pulse current. Both maintain 600W peak pulse power and full temperature range operation. These parts require circuit-level validation to confirm compatibility with the protected circuit's transient voltage profile.

All substitute parts are active production components with full RoHS3 compliance and unlimited moisture sensitivity rating, supporting long-term supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can SMBJ60D-M3/H replace SMBJ60A-M3/52 directly?

A: Yes. Both parts maintain 60V reverse standoff voltage and 600W peak pulse power. The SMBJ60D-M3/H exhibits 95.5V clamping voltage (versus 96.8V) and 6.28A peak pulse current (versus 6.2A), representing normal manufacturing variation within the 60V series specification. No circuit modification is required.

Q: What is the difference between SMBJ60A-E3/52 and SMBJ60A-M3/52?

A: Both parts are manufactured by Vishay with identical electrical specifications (60V standoff, 96.8V clamping, 6.2A peak pulse current). The primary difference is packaging: SMBJ60A-M3/52 is supplied in Tape & Reel (TR) format, while SMBJ60A-E3/52 is supplied in Cut Tape (CT) & Digi-Reel® format. Electrical performance and component functionality are equivalent.

Q: Can SMBJ51A be used instead of SMBJ60A-M3/52?

A: SMBJ51A operates at 51V reverse standoff with 82.4V clamping voltage, compared to 60V standoff and 96.8V clamping for SMBJ60A-M3/52. This part is suitable only if the protected circuit operates at lower transient voltage levels. Direct substitution without circuit validation may result in inadequate protection at higher transient voltages.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts carry RoHS3 compliance certification and MSL 1 (unlimited) moisture sensitivity rating, matching the compliance profile of SMBJ60A-M3/52.

Q: What is the temperature range difference between MDD SMBJ60A and Vishay SMBJ60A-M3/52?

A: Vishay SMBJ60A-M3/52 operates from -55°C to 150°C junction temperature. MDD SMBJ60A operates from -50°C to 150°C. For applications requiring operation below -50°C, Vishay or Diodes Incorporated alternatives are required.

Q: Do all substitute parts use the same DO-214AA package?

A: Yes. All substitute parts use the DO-214AA (SMB) surface mount package, ensuring mechanical and footprint compatibility with SMBJ60A-M3/52.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message