SMBJ12E3/TR13 Equivalent & Substitute Parts

Part Overview

The SMBJ12E3/TR13 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Microchip Technology, designed for general-purpose overvoltage protection applications. This surface-mount component operates with a 12V reverse standoff voltage and provides clamping at 22V with a peak pulse current of 27.3A. The part is active in production status and widely available in inventory.

Equivalent and substitute parts are identified based on matching electrical characteristics including reverse standoff voltage, breakdown voltage, clamping voltage, peak pulse current, and power dissipation ratings. Substitute components must maintain compatibility with the DO-214AA (SMB) package footprint and surface-mount assembly requirements.

Key Parameters

Parameter	Value	Unit
Manufacturer Part Number	SMBJ12E3/TR13	—
Manufacturer	Microchip Technology	—
Category	Transient Voltage Suppressors (TVS)	—
Type	Zener	—
Unidirectional Channels	1	—
Voltage - Reverse Standoff (Typ)	12	V
Voltage - Breakdown (Min)	13.3	V
Voltage - Clamping (Max) @ Ipp	22	V
Current - Peak Pulse (10/1000µs)	27.3	A
Power - Peak Pulse	600	W
Operating Temperature Range	-65 to 150	°C (TJ)
Package / Case	DO-214AA, SMB	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
Product Status	Active	—

Substitute Part Grouping Explanation

Substitution of the SMBJ12E3/TR13 is determined by the following critical electrical and mechanical parameters:

Primary Matching Criteria:

Reverse standoff voltage: 12V (typical)
Breakdown voltage minimum: 13.3V
Unidirectional channel configuration: 1 channel
Package type: DO-214AA (SMB) surface mount
Zener diode type classification

Secondary Compatibility Parameters:

Clamping voltage at peak pulse current (Ipp): 19V to 22V range
Peak pulse current (10/1000µs): 25A to 31A range
Power dissipation: 500W to 600W
Operating temperature range: -55°C to 175°C minimum coverage
RoHS3 compliance and MSL 1 rating

Substitute parts are grouped into two categories based on clamping voltage performance:

Group A (Lower Clamping Voltage): SACB12 operates at 19V clamping with 25A peak pulse current. This substitute provides reduced voltage clamping compared to the main part.

Group B (Matched Clamping Voltage): SMBJ12A (EVVO Semi), SMBJ12A-13-F (Diodes Incorporated), SMBJ12A-TP (Micro Commercial Co), SMBJ12A-TR (STMicroelectronics), and SZ1SMB12AT3G (Littelfuse Inc.) all operate at 19.9V clamping with peak pulse currents between 30.2A and 31A, providing electrical performance closely aligned with the main part specification.

Parameter Comparison

Parameter	SMBJ12E3/TR13 (Main)	SACB12	SMBJ12A (EVVO)	SMBJ12A-13-F	SMBJ12A-TP	SMBJ12A-TR	SZ1SMB12AT3G
Manufacturer	Microchip Technology	Littelfuse Inc.	EVVO Semi	Diodes Incorporated	Micro Commercial Co	STMicroelectronics	Littelfuse Inc.
Voltage - Reverse Standoff (Typ)	12V	12V	12V	12V	12V	12V	12V
Voltage - Breakdown (Min)	13.3V	13.3V	13.3V	13.3V	13.3V	13.3V	13.3V
Voltage - Clamping (Max) @ Ipp	22V	19V	19.9V	19.9V	19.9V	19.9V	19.9V
Current - Peak Pulse (10/1000µs)	27.3A	25A	30.2A	30.2A	30.2A	31A	30.2A
Power - Peak Pulse	600W	500W	600W	600W	600W	600W	600W
Operating Temperature Range	-65 to 150°C	-55 to 150°C	-65 to 150°C	-55 to 150°C	-55 to 175°C	-55 to 150°C	-65 to 150°C
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AC, SMA	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All identified substitute parts maintain active production status and full RoHS3 compliance, ensuring long-term availability and regulatory conformance for new designs and production environments.

For Direct Electrical Equivalence: SMBJ12A-13-F (Diodes Incorporated), SMBJ12A-TP (Micro Commercial Co), SMBJ12A-TR (STMicroelectronics), and SZ1SMB12AT3G (Littelfuse Inc.) provide the closest electrical match with 19.9V clamping voltage and peak pulse currents between 30.2A and 31A. These parts are suitable for applications requiring performance characteristics aligned with the original SMBJ12E3/TR13 specification.

For Reduced Clamping Voltage Applications: SACB12 (Littelfuse Inc.) operates at 19V clamping with 25A peak pulse current and 500W power dissipation. This substitute is applicable in circuits where lower clamping voltage is acceptable and peak pulse current requirements do not exceed 25A.

Package Compatibility Consideration: SMBJ12A (EVVO Semi) uses DO-214AC (SMA) package, which differs from the DO-214AA (SMB) footprint of the main part. This substitute requires PCB layout modification and is not recommended for direct board-level replacement without design revision.

Temperature Range Consideration: SMBJ12A-TP (Micro Commercial Co) extends the upper operating temperature to 175°C, providing enhanced thermal performance for high-temperature applications compared to the main part specification of 150°C.

Frequently Asked Questions (FAQ)

Q: Can SACB12 be used as a direct replacement for SMBJ12E3/TR13?

A: SACB12 shares the same 12V reverse standoff voltage, 13.3V breakdown voltage, and DO-214AA (SMB) package footprint. However, it operates at 19V clamping voltage compared to the main part's 22V specification, and provides 25A peak pulse current versus 27.3A. SACB12 is suitable for applications where lower clamping voltage is acceptable and peak pulse current does not exceed 25A.

Q: What is the difference between SMBJ12A variants from different manufacturers?

A: SMBJ12A variants from EVVO Semi, Diodes Incorporated, Micro Commercial Co, and STMicroelectronics all share the same electrical specifications: 12V reverse standoff, 13.3V breakdown, and 19.9V clamping voltage. Primary differences include peak pulse current ratings (30.2A to 31A), operating temperature ranges (-55°C to 175°C maximum), and packaging formats (SMB or SMA). Selection depends on specific application requirements and supply chain availability.

Q: Why does SMBJ12A from EVVO Semi use a different package (DO-214AC/SMA) than other variants?

A: The DO-214AC (SMA) package is physically smaller than DO-214AA (SMB). While electrically equivalent, this package difference requires PCB footprint modification and is not suitable for direct board-level replacement without design revision. Verify PCB layout compatibility before selecting this variant.

Q: Is SZ1SMB12AT3G suitable for automotive applications?

A: SZ1SMB12AT3G carries AEC-Q101 automotive qualification and is designated as automotive grade. This part is suitable for automotive and high-reliability applications requiring formal qualification documentation. Other substitute parts do not carry automotive qualification.

Q: What is the significance of the clamping voltage difference between the main part (22V) and most substitutes (19.9V)?

A: Clamping voltage determines the maximum voltage level at which the TVS diode conducts during transient suppression. The main part clamps at 22V, while most substitutes clamp at 19.9V. Lower clamping voltage provides more aggressive transient suppression but may increase power dissipation in the protected circuit. Application circuit design must accommodate the selected clamping voltage specification.

Q: Are all substitute parts RoHS3 compliant?

A: All identified substitute parts carry ROHS3 Compliant status, ensuring regulatory conformance for applications subject to RoHS3 requirements. All parts also maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: What inventory levels are available for each substitute part?

A: Inventory availability varies by manufacturer and distributor. SMBJ12A-13-F (Diodes Incorporated) shows the highest inventory at 35,200 pieces. SMBJ12A (EVVO Semi) and SZ1SMB12AT3G (Littelfuse Inc.) each show approximately 6,300 to 6,800 pieces. SACB12 (Littelfuse Inc.) shows 4,100 pieces. SMBJ12A-TP (Micro Commercial Co) and SMBJ12A-TR (STMicroelectronics) show 3,300 to 3,550 pieces. Verify current inventory status with component suppliers before design commitment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message