SMBJ10 Equivalent & Substitute Parts

Part Overview

The SMBJ10 is a unidirectional transient voltage suppressor (TVS) diode manufactured by Littelfuse Inc., designed for general-purpose overvoltage protection in surface-mount applications. The device features a 10V reverse standoff voltage with 17.85V maximum clamping voltage and 35.3A peak pulse current capability in a DO-214AA (SMB) package. The SMBJ10 is classified as obsolete, necessitating identification of active equivalent and substitute components that maintain electrical and mechanical compatibility for new designs and production continuity.

Key Parameters

Parameter	Value	Unit
Voltage - Reverse Standoff (Typ)	10	V
Voltage - Breakdown (Min)	10.53	V
Voltage - Clamping (Max) @ Ipp	17.85	V
Current - Peak Pulse (10/1000µs)	35.3	A
Power - Peak Pulse	600	W
Package / Case	DO-214AA, SMB	-
Mounting Type	Surface Mount	-
Operating Temperature Range	-65 to 150	°C (TJ)
Type	Zener	-
Unidirectional Channels	1	-
RoHS Status	ROHS3 Compliant	-
Moisture Sensitivity Level (MSL)	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitution of the SMBJ10 is determined by strict alignment of the following electrical and mechanical parameters:

Critical Parameters for Substitution:

Voltage - Reverse Standoff: 10V (nominal)
Voltage - Clamping (Max) @ Ipp: 17V to 17.85V range
Current - Peak Pulse (10/1000µs): 35.3A minimum
Power - Peak Pulse: 600W minimum
Package / Case: DO-214AA (SMB) surface mount
Type: Unidirectional Zener diode
Channels: 1 unidirectional channel

Substitute parts are grouped into two categories:

Category 1: Direct Electrical Equivalents (35.3A Peak Pulse) Parts maintaining identical peak pulse current (35.3A) and 600W power dissipation with clamping voltages within 17V to 17.85V range. These include SMBJ10A variants from Vishay, Micro Commercial Co, and Comchip Technology.

Category 2: Enhanced Performance Alternatives (58.8A Peak Pulse) Parts with higher peak pulse current capability (58.8A) and 1000W power dissipation. These provide superior transient protection margin while maintaining the same voltage parameters and DO-214AA package. This category includes SMB10J10A variants from Vishay.

Category 3: Reduced Performance Alternative (29A Peak Pulse) The SMBSAC10-TP offers bidirectional protection with reduced peak pulse current (29A) and 500W power dissipation. This part is suitable only for applications where bidirectional suppression is required and lower current handling is acceptable.

Parameter Comparison

Part Number	Manufacturer	Product Status	Voltage - Reverse Standoff (V)	Voltage - Clamping (Max) @ Ipp (V)	Current - Peak Pulse (A)	Power - Peak Pulse (W)	Operating Temp (°C)	Package	Channels
SMBJ10	Littelfuse Inc.	Obsolete	10	17.85	35.3	600	-65 to 150	DO-214AA (SMB)	1 Unidirectional
SMBJ10A	MDD	Active	10	17	35.3	600	-50 to 150	DO-214AA (SMB)	1 Unidirectional
SMB10J10A-E3/52	Vishay General Semiconductor	Active	10	17	58.8	1000	-55 to 150	DO-214AA (SMB)	1 Unidirectional
SMB10J10A-E3/5B	Vishay General Semiconductor	Active	10	17	58.8	1000	-55 to 150	DO-214AA (SMB)	1 Unidirectional
SMBJ10A-E3/5B	Vishay General Semiconductor	Active	10	17	35.3	600	-55 to 150	DO-214AA (SMB)	1 Unidirectional
SMBJ10A-TP	Micro Commercial Co	Active	10	17	35.3	600	-55 to 175	DO-214AA (SMB)	1 Unidirectional
SMBSAC10-TP	Micro Commercial Co	Active	10	16.3	29	500	-55 to 175	DO-214AA (SMB)	1 Bidirectional
TV06B100J-G	Comchip Technology	Active	10	17	35.29	600	Not specified	DO-214AA (SMB)	1 Unidirectional
TV06B100J-HF	Comchip Technology	Active	10	17	35.29	600	Not specified	DO-214AA (SMB)	1 Unidirectional

Engineering Selection Recommendations

Primary Substitutes (Direct Equivalents): SMBJ10A-E3/5B (Vishay), SMBJ10A-TP (Micro Commercial Co), TV06B100J-G, and TV06B100J-HF (Comchip Technology) are direct electrical and mechanical equivalents. All maintain 35.3A peak pulse current, 600W power dissipation, and 17V clamping voltage within the SMBJ10 specification envelope. All substitute parts are active products with ROHS3 compliance and MSL 1 rating. Vishay variants extend the operating temperature range to -55°C, providing improved low-temperature performance compared to the original -65°C specification.

Enhanced Performance Alternative: SMB10J10A-E3/52 and SMB10J10A-E3/5B (Vishay TransZorb® series) offer 58.8A peak pulse current and 1000W power dissipation. These parts are suitable for applications requiring higher transient protection margin while maintaining identical voltage parameters and package compatibility. The increased current and power ratings provide design headroom for demanding transient suppression requirements.

Conditional Substitute: SMBSAC10-TP (Micro Commercial Co) provides bidirectional protection with reduced specifications (29A peak pulse, 500W power). This part is suitable only for applications where bidirectional suppression is required and the lower current rating is acceptable. The bidirectional channel configuration differs from the unidirectional SMBJ10 topology.

Compliance and Availability: All recommended substitutes are active products with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Inventory availability ranges from 752 to 113,100 units across manufacturers, ensuring production continuity.

Frequently Asked Questions (FAQ)

Q: Can SMBJ10A directly replace SMBJ10 without circuit modification? A: Yes. SMBJ10A variants from Vishay, Micro Commercial Co, and Comchip Technology are direct electrical and mechanical equivalents. All maintain the same 10V reverse standoff voltage, 17V clamping voltage, 35.3A peak pulse current, and DO-214AA package. No circuit modifications are required.

Q: What is the difference between SMBJ10A-E3/5B and SMB10J10A-E3/5B? A: Both are Vishay products with identical voltage parameters (10V standoff, 17V clamping). The key difference is peak pulse current: SMBJ10A-E3/5B handles 35.3A (600W), while SMB10J10A-E3/5B handles 58.8A (1000W). The SMB10J10A variant provides higher transient protection capability and is suitable for more demanding applications.

Q: Is SMBSAC10-TP a suitable replacement for SMBJ10? A: SMBSAC10-TP is not recommended as a direct replacement. While it maintains the 10V reverse standoff voltage and DO-214AA package, it is bidirectional (versus unidirectional) and has reduced specifications: 16.3V clamping voltage, 29A peak pulse current, and 500W power dissipation. Use only if bidirectional suppression is required and lower current handling is acceptable.

Q: Do all substitute parts have the same operating temperature range? A: No. The original SMBJ10 operates from -65°C to 150°C. Most substitutes operate from -55°C to 150°C (Vishay, Comchip), while SMBJ10A-TP (Micro Commercial Co) extends to -55°C to 175°C. Verify temperature requirements for your application.

Q: Are all substitute parts RoHS compliant? A: Yes. All recommended substitute parts are ROHS3 compliant with MSL 1 (unlimited moisture sensitivity), matching the original SMBJ10 compliance status.

Q: What packaging options are available for substitutes? A: All substitute parts use DO-214AA (SMB) surface-mount package, identical to the original SMBJ10. Packaging formats vary: Tape & Reel (TR) is standard for most variants, while SMBSAC10-TP is supplied in Bulk format.

Q: Can I use TV06B100J-G or TV06B100J-HF interchangeably? A: Yes. Both Comchip Technology parts are electrically identical with 10V standoff, 17V clamping, and 35.29A peak pulse current. The primary difference is packaging designation (HF versus G suffix). Both are suitable direct replacements for SMBJ10.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message