SMB8J33CA-M3/52 Equivalent & Substitute Parts

Part Overview

The SMB8J33CA-M3/52 is a bidirectional transient voltage suppressor (TVS) diode manufactured by Vishay General Semiconductor - Diodes Division. This surface mount component operates in the DO-214AA (SMB) package and is designed for general-purpose overvoltage protection applications. The part is currently active in production with 987 units in stock. Equivalent and substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when sourcing from multiple manufacturers is needed to optimize supply chain resilience.

Key Parameters

Parameter	Value
Manufacturer Part Number	SMB8J33CA-M3/52
Manufacturer	Vishay General Semiconductor - Diodes Division
Category	Transient Voltage Suppressors (TVS)
Package / Case	DO-214AA, SMB
Voltage - Reverse Standoff (Typ)	33V
Voltage - Breakdown (Min)	36.7V
Voltage - Clamping (Max) @ Ipp	53.3V
Current - Peak Pulse (10/1000µs)	15A
Power - Peak Pulse	800W
Operating Temperature Range	-55°C ~ 150°C (TJ)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the SMB8J33CA-M3/52 is determined by strict alignment of the following critical electrical and mechanical parameters:

Electrical Parameters (Must Match):

Voltage - Reverse Standoff (Typ): 33V
Voltage - Breakdown (Min): 36.7V
Voltage - Clamping (Max) @ Ipp: 53.3V
Bidirectional Channels: 1
Package / Case: DO-214AA, SMB

Mechanical Parameters (Must Match):

Mounting Type: Surface Mount
Packaging Format: Surface Mount compatible

Acceptable Variations:

Current - Peak Pulse (10/1000µs): 11.3A to 15A (all substitutes meet or exceed minimum protection requirements)
Power - Peak Pulse: 600W to 800W (all substitutes provide adequate dissipation)
Operating Temperature Range: Minimum -55°C, Maximum 150°C or higher
RoHS and MSL compliance: ROHS3 Compliant, MSL 1

All identified substitute parts maintain the core voltage protection characteristics (33V standoff, 36.7V breakdown, 53.3V clamping) and surface mount DO-214AA package compatibility required for direct circuit board substitution.

Parameter Comparison

Parameter	SMB8J33CA-M3/52 (Vishay)	SMBJ33CA (MDD)	SMBJ33CA R5G (TSC)	SMBJ33CA-13-F (Diodes Inc.)	SMBJ33CA-Q (Bourns)	SMBJ33CA-TP (MCC)	SMBJ33CAE3/TR13 (Microchip)	SZ1SMB33CAT3G (Littelfuse)
Voltage - Reverse Standoff (Typ)	33V	33V	33V	33V	33V	33V	33V	33V
Voltage - Breakdown (Min)	36.7V	36.7V	36.7V	36.7V	36.7V	36.7V	36.7V	36.7V
Voltage - Clamping (Max) @ Ipp	53.3V	53.3V	53.3V	53.3V	53.3V	53.3V	53.3V	53.3V
Current - Peak Pulse (10/1000µs)	15A	11.3A	11.8A	11.3A	11.3A	11.3A	11.3A	11.3A
Power - Peak Pulse	800W	600W	600W	600W	600W	600W	600W	600W
Operating Temperature Range	-55°C ~ 150°C	-50°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 175°C	-65°C ~ 150°C	-65°C ~ 150°C
Package / Case	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB	DO-214AA, SMB
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Discontinued at DiGi Electronics	Active	Active	Active	Active	Active

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the SMB8J33CA-M3/52. Selection among active alternatives should prioritize the following factors:

Product Status: SMBJ33CA R5G (Taiwan Semiconductor Corporation) is discontinued at DiGi Electronics and should be avoided for new designs or long-term supply requirements. All other substitutes maintain active product status.

Compliance & Certifications: SMBJ33CA-Q (Bourns Inc.) and SZ1SMB33CAT3G (Littelfuse Inc.) carry AEC-Q101 automotive qualification and are suitable for automotive-grade applications. SMBJ33CA-TP (Micro Commercial Co) extends the operating temperature range to 175°C, providing additional thermal margin in high-temperature environments. SMBJ33CAE3/TR13 (Microchip Technology) and SZ1SMB33CAT3G support the widest operating temperature range (-65°C to 150°C).

Current Rating Consideration: The SMB8J33CA-M3/52 specifies 15A peak pulse current, while all substitutes provide 11.3A to 11.8A. This represents a reduction in peak pulse handling capability. Substitutes are suitable for applications where the circuit design does not require the full 15A peak pulse rating. For applications requiring 15A peak pulse capability, the original SMB8J33CA-M3/52 should be retained.

Inventory & Availability: SZ1SMB33CAT3G (Littelfuse) offers the highest inventory level (107,750 units), followed by SMBJ33CA-13-F (Diodes Incorporated, 35,300 units) and SMBJ33CA (MDD, 25,840 units), providing superior supply chain flexibility.

Frequently Asked Questions (FAQ)

Q: Can I substitute a part with lower peak pulse current (11.3A vs. 15A)?

A: Substitution is permissible only if your circuit design does not require the full 15A peak pulse rating. The clamping voltage (53.3V) and standoff voltage (33V) remain identical across all parts. Verify that your transient event specifications do not exceed 11.3A peak pulse current before substituting.

Q: Are all substitute parts in the same DO-214AA (SMB) package?

A: Yes. All substitute parts use the DO-214AA (SMB) surface mount package and are mechanically and electrically compatible with the original PCB layout. No board redesign is required.

Q: Which substitute part should I use for automotive applications?

A: SMBJ33CA-Q (Bourns Inc.) and SZ1SMB33CAT3G (Littelfuse Inc.) both carry AEC-Q101 automotive qualification. Both are suitable for automotive-grade designs.

Q: What is the difference between the various packaging formats listed (Tape & Reel, Cut Tape)?

A: Packaging format refers to the supply method (Tape & Reel for high-volume automated assembly, Cut Tape for lower volumes or manual handling). All formats contain the same component in the DO-214AA package. Select based on your manufacturing process requirements.

Q: Is SMBJ33CA R5G (Taiwan Semiconductor Corporation) still available?

A: This part is discontinued at DiGi Electronics. For new designs or ongoing production, select from the active alternatives listed.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts listed are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the original part's environmental compliance profile.

Q: Can I use SMBJ33CA-TP if my circuit operates at 175°C?

A: Yes. SMBJ33CA-TP (Micro Commercial Co) supports an operating temperature range of -55°C to 175°C, providing 25°C additional thermal margin compared to the standard -55°C to 150°C range of other substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message