SMAS001D00 SMA Connector Receptacle Equivalent & Substitute Parts

Part Overview

The SMAS001D00 is an SMA connector receptacle manufactured by JAE Electronics, designed for RF coaxial applications requiring 50-ohm impedance. This female socket connector features right-angle through-hole mounting with solder termination for PCB integration. The component is currently active in production with 2348 units in stock. Equivalent and substitute parts are identified to provide procurement flexibility, ensure supply chain continuity, and support design requirements across different manufacturing sources.

Substiute Parts

SMAS001D00

JAE ElectronicsIn Stock: 2414SMAS001D00 Datasheet

Current PartRFQ

CONSMA002

TE Connectivity LinxIn Stock: 6165CONSMA002 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SMAS001D00 is determined by strict equivalence across the following critical parameters:

Connector Style, Connector Type, Impedance, Mounting Type, Contact Termination, Shield Termination, Frequency - Max, Number of Ports, Fastening Type, Dielectric Material, Center Contact Plating, Body Finish, and RoHS Status.

The substitute part CONSMA002 (TE Connectivity Linx) meets all substitution criteria. Both parts are SMA female socket receptacles with 50-ohm impedance, right-angle through-hole solder termination, 12.4 GHz maximum frequency, threaded fastening, PTFE dielectric, gold-plated center contacts, nickel body finish, and RoHS compliance. Material composition differences (center contact and body material) do not preclude substitution when electrical and mechanical parameters remain equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both SMAS001D00 and CONSMA002 are active production components with RoHS compliance and MSL 1 rating. Selection between these parts should be based on application-specific requirements:

SMAS001D00 (JAE Electronics) is suitable for applications within the -40°C to 85°C operating range with up to 200 mating cycles and documented insertion loss of 0.1 dB.

CONSMA002 (TE Connectivity Linx) is suitable for applications requiring extended operating temperature range (-65°C to 165°C) and higher mating cycle durability (500 cycles). Insertion loss is not specified for this part.

Both parts satisfy identical electrical and mechanical interface requirements for 50-ohm SMA female socket receptacles with right-angle through-hole solder termination at frequencies up to 12.4 GHz.

Frequently Asked Questions (FAQ)

Q: Can CONSMA002 be used as a direct replacement for SMAS001D00?

A: Yes. Both parts meet identical specifications for SMA connector style, female socket type, 50-ohm impedance, right-angle through-hole mounting, solder termination, 12.4 GHz frequency rating, and RoHS compliance. Electrical and mechanical compatibility is established.

Q: What are the differences between these parts?

A: Operating temperature range, mating cycle rating, and insertion loss specification differ. CONSMA002 supports -65°C to 165°C (versus -40°C to 85°C) and 500 mating cycles (versus 200). SMAS001D00 specifies 0.1 dB insertion loss; CONSMA002 does not provide this specification.

Q: Which part should be selected for high-temperature applications?

A: CONSMA002 supports the extended operating temperature range of -65°C to 165°C, making it suitable for high-temperature environments. SMAS001D00 is rated to 85°C maximum.

Q: Are packaging differences relevant to substitution?

A: SMAS001D00 packaging is not specified in available data. CONSMA002 is supplied in bulk packaging. Packaging format does not affect electrical or mechanical compatibility for component-level substitution.

Q: Do both parts meet RoHS requirements?

A: Yes. Both SMAS001D00 and CONSMA002 are RoHS compliant with MSL 1 (unlimited moisture sensitivity level).