SMA6F13A-TP Equivalent & Substitute Parts

Part Overview

The SMA6F13A-TP is a unidirectional Transient Voltage Suppressor (TVS) diode manufactured by Micro Commercial Co, designed for general-purpose overvoltage protection applications. This component features a 13V reverse standoff voltage with a 20.4V maximum clamping voltage and 29A peak pulse current capability in a surface-mount DO-221AC (SMA Flat Leads) package. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and production continuity.

Substiute Parts

SMA6F13A-TP

Micro Commercial CoIn Stock: 646SMA6F13A-TP Datasheet

Current PartRFQ

SMA6J13AFL-TP

Micro Commercial CoIn Stock: 871SMA6J13AFL-TP Datasheet

MFR RecommendedRFQ

SM4T15AY

STMicroelectronicsIn Stock: 6372SM4T15AY Datasheet

SimilarRFQ

SMA6L13A

Littelfuse Inc.In Stock: 3763SMA6L13A Datasheet

SimilarRFQ

SMAJ13A-TR

STMicroelectronicsIn Stock: 2383SMAJ13A-TR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SMA6F13A-TP is determined by the following critical parameters:

• Voltage Rating Match: Reverse standoff voltage of 13V and breakdown voltage minimum of 14.4V
• Package Compatibility: Surface-mount package with mechanical fit to DO-221AC or equivalent footprint
• Current Handling: Peak pulse current capability of 29A or greater
• Power Dissipation: Peak pulse power rating of 600W or greater
• Diode Type: Unidirectional Zener TVS configuration

The substitute parts identified below meet these core electrical and mechanical criteria, though variations in clamping voltage and peak pulse current specifications exist within acceptable engineering tolerances for general-purpose protection applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: SMA6J13AFL-TP

The SMA6J13AFL-TP is the manufacturer-recommended direct substitute. It maintains identical voltage ratings (13V standoff, 14.4V breakdown minimum) and package form factor (DO-221AC, SMA Flat Leads). The clamping voltage increases marginally to 21.5V with peak pulse current of 27.9A, both within acceptable tolerance for general-purpose protection. This part is active in production with REACH compliance and carries automotive-grade qualification, ensuring long-term availability and supply chain stability.

Secondary Recommendation: SMA6L13A

The SMA6L13A from Littelfuse Inc. provides equivalent electrical performance with identical voltage ratings and package compatibility. It delivers 28A peak pulse current and 21.5V clamping voltage, closely matching the original specification. This part is active in production with extended lower operating temperature capability (-65°C minimum) and carries ROHS3 compliance. The DO-221AC package ensures direct mechanical compatibility.

Alternative Consideration: SM4T15AY and SMAJ13A-TR

Both STMicroelectronics parts (SM4T15AY and SMAJ13A-TR) maintain the required 13V standoff and 14.4V breakdown voltages. However, these components use the DO-214AC (SMA) package instead of DO-221AC, requiring PCB footprint verification before selection. Both deliver higher peak pulse current (85A at 8/20µs) and carry AEC-Q101 automotive qualification. The reduced peak pulse power rating (400W versus 600W) should be evaluated against application requirements.

Compliance Considerations

All recommended substitutes maintain ROHS3 compliance and REACH unaffected status, matching the original part's regulatory posture. The SMA6J13AFL-TP and SMA6L13A preserve the DO-221AC package footprint, eliminating redesign risk. Parts with automotive-grade qualification (SMA6J13AFL-TP, SM4T15AY, SMAJ13A-TR) provide enhanced supply chain assurance for production applications.

Frequently Asked Questions (FAQ)

Q: Can I use SM4T15AY or SMAJ13A-TR as direct drop-in replacements?

A: These parts maintain identical voltage ratings but use DO-214AC (SMA) packaging instead of DO-221AC (SMA Flat Leads). PCB footprint compatibility must be verified. If your design accommodates the DO-214AC package, these parts are electrically suitable. If your PCB is designed specifically for DO-221AC flat leads, physical fit will not be possible without redesign.

Q: What is the significance of the clamping voltage difference between SMA6F13A-TP (20.4V) and the substitute parts?

A: The clamping voltage represents the maximum voltage across the diode during transient suppression. Variations between 20.4V and 27.2V remain within acceptable engineering tolerance for general-purpose protection applications. Higher clamping voltages (27.2V) provide slightly less aggressive suppression but remain effective for most circuit protection scenarios. Application-specific voltage stress limits should be reviewed to confirm suitability.

Q: Why do some substitute parts show different peak pulse current specifications (29A versus 85A)?

A: Peak pulse current capability depends on package thermal characteristics and internal die design. Higher current ratings (85A) indicate greater transient energy handling capacity. For applications requiring the original 29A specification, SMA6J13AFL-TP and SMA6L13A provide matched performance. Parts with 85A capability offer design margin but may not be necessary if the original 29A rating was application-specific.

Q: Are all substitute parts available in the same packaging options?

A: SMA6J13AFL-TP and SMA6L13A are available in Bulk and Tape & Reel (TR) packaging, respectively. SM4T15AY and SMAJ13A-TR are supplied in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats. Verify packaging availability with your supplier to match production requirements.

Q: What is the impact of operating temperature range differences?

A: The original SMA6F13A-TP operates to 175°C (TA), while most substitutes are rated to 150°C (TJ). For applications operating near maximum temperature limits, verify that the reduced upper temperature rating does not compromise performance. The SMA6L13A extends the lower temperature limit to -65°C, providing advantage in extreme cold environments.

Q: Do I need to re-qualify components if I switch from SMA6F13A-TP to a substitute?

A: Substitution within the same voltage class and package family typically does not require full re-qualification if electrical parameters remain within design margins. However, automotive or safety-critical applications should follow formal change control procedures. Consult your quality and engineering teams regarding specific re-qualification requirements for your application.