SMA6823MH Motor Driver IC - Equivalent & Substitute Parts

Part Overview

The SMA6823MH is an integrated motor driver IC manufactured by Sanken Electric USA Inc., designed for AC and synchronous motor control applications. This fully integrated power management IC combines control and power stage functionality in a 24-ZIP package, operating across a 14.6V to 16.5V supply voltage range. The device is currently in active production status with 2100 units available in inventory. Alternative equivalent parts may be required due to packaging availability, supply chain considerations, or specific application requirements.

Substiute Parts

SMA6823MH

Sanken Electric USA Inc.In Stock: 2176SMA6823MH Datasheet

Current PartRFQ

SMA6823MHLF2451

Sanken Electric USA Inc.In Stock: 1606SMA6823MHLF2451 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The SMA6823MHLF2451 qualifies as a parametric equivalent to the SMA6823MH based on the following substitution criteria:

Matching Electrical Parameters:

• Voltage Supply Range: 14.6V ~ 16.5V (identical)
• Output Current: 2.5A (identical)
• Maximum Load Voltage: 400V (identical)
• Operating Temperature Range: -20°C ~ 150°C (TJ) (identical)
• Motor Type: AC, Synchronous (identical)
• Output Configuration: Half Bridge (3) (identical)
• Interface: Parallel (identical)
• Technology: Power MOSFET (identical)

Matching Mechanical & Compliance Parameters:

• Manufacturer: Sanken Electric USA Inc. (identical)
• Mounting Type: Through Hole (identical)
• Package / Case: 24-SSIP Formed Leads (identical)
• RoHS Status: RoHS Compliant (identical)
• Moisture Sensitivity Level: 1 (Unlimited) (identical)
• Base Product Number: SMA6823 (identical)

Package Variation: The primary distinction is the supplier device package designation: SMA6823MH uses 24-ZIP (SMA-24), while SMA6823MHLF2451 uses 24-SIP with LF2451 specification. Both packages maintain identical pin configuration, lead formation, and through-hole mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the SMA6823MH and SMA6823MHLF2451 are active production components manufactured by Sanken Electric USA Inc. with full RoHS compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on:

Inventory Availability: SMA6823MH has 2100 units in stock, while SMA6823MHLF2451 has 1559 units available.

Package Specification: The SMA6823MH is designated as 24-ZIP (SMA-24), while the SMA6823MHLF2451 carries the 24-SIP, LF2451 designation. Both maintain identical electrical performance and through-hole mounting compatibility. The package designation difference reflects supplier-specific nomenclature rather than functional variation.

Compliance Status: Both parts maintain identical RoHS compliance and MSL ratings, ensuring equivalent reliability and environmental performance in appliance motor control applications.

Frequently Asked Questions (FAQ)

Q: Can SMA6823MHLF2451 be used as a direct replacement for SMA6823MH?

A: Yes. All electrical parameters, mechanical specifications, and compliance certifications are identical. The parts differ only in supplier device package designation (24-ZIP versus 24-SIP, LF2451), which does not affect functional performance or pin compatibility in through-hole applications.

Q: What is the difference between 24-ZIP and 24-SIP packaging?

A: Both designations refer to 24-pin single in-line packages with SSIP formed leads. The nomenclature difference reflects supplier-specific classification. Electrical performance, pin configuration, and mounting compatibility remain identical.

Q: Are there any temperature or voltage rating differences?

A: No. Both parts operate identically across the 14.6V to 16.5V supply range, support 400V maximum load voltage, and function across the -20°C to 150°C temperature range.

Q: Which part should be selected for new designs?

A: Selection should be based on current inventory availability and supply chain requirements. Both parts are active production components with identical specifications and are suitable for new appliance motor control designs.

Q: Do both parts require the same PCB footprint?

A: Yes. Both parts use 24-pin through-hole mounting with identical lead spacing and formation. PCB designs are fully interchangeable.

Q: Are there any compliance or certification differences?

A: No. Both parts carry identical RoHS compliance status and MSL rating of 1 (Unlimited), ensuring equivalent environmental and reliability performance.