SM0807BC-RP Equivalent & Substitute Parts

Part Overview

The SM0807BC-RP is an active surface mount LED indicator manufactured by Bivar Inc., featuring independent green and red LED elements in a compact 0807 (2018 Metric) package. This dual-color diffused LED is designed for discrete indication applications requiring simultaneous green and red light output. The part is ROHS3 compliant and currently in active production with 1056 units in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across critical parameters including forward voltage, test current, viewing angle, mounting type, and package footprint dimensions.

Substiute Parts

SM0807BC-RP

Bivar Inc.In Stock: 1125SM0807BC-RP Datasheet

Current PartRFQ

APHBM2012SURKCGKC

KingbrightIn Stock: 2505APHBM2012SURKCGKC Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SM0807BC-RP is determined by the following critical parameters:

Electrical Compatibility:

• Forward voltage (Vf) for green element: 2.1V nominal
• Forward voltage (Vf) for red element: 1.8V to 1.95V range
• Test current: 20mA for both colors
• Viewing angle: 120°

Mechanical Compatibility:

• Mounting type: Surface Mount required
• Configuration: Independent green and red elements
• Color output: Green and Red dual-color capability
• Lens style: Rectangle with flat top

Regulatory & Environmental:

• RoHS3 compliance required
• ECCN: EAR99
• HTSUS: 8541.41.0000

The APHBM2012SURKCGKC from Kingbright meets these substitution criteria through equivalent electrical parameters and surface mount compatibility, despite differences in package size designation (0805 vs 0807 metric), lens transparency (clear vs diffused), and brightness ratings.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (SM0807BC-RP): The SM0807BC-RP remains the preferred selection when the original design specifications require diffused lens optics, the 0807 package footprint, and the specified brightness levels (13mcd green, 19mcd red). This part is active in production with adequate inventory availability and full ROHS3 compliance.

Substitute Selection (APHBM2012SURKCGKC): The APHBM2012SURKCGKC from Kingbright is electrically compatible as a substitute when circuit design can accommodate the following differences:

• Package footprint change from 0807 to 0805 (2012 Metric) with reduced width (1.25mm vs 1.80mm) and significantly reduced height (0.45mm vs 1.10mm)
• Lens transparency change from diffused to clear, resulting in higher brightness output (50mcd green, 80mcd red vs 13mcd green, 19mcd red)
• Red forward voltage tolerance of 1.95V versus 1.8V nominal
• Improved moisture sensitivity level (MSL 3 vs MSL 4)

Both parts maintain identical forward voltage for green elements (2.1V), test current (20mA), viewing angle (120°), and surface mount compatibility. Both are ROHS3 compliant and active in production.

Frequently Asked Questions (FAQ)

Q: Can APHBM2012SURKCGKC replace SM0807BC-RP in existing PCB designs?

A: Direct PCB replacement requires verification of footprint compatibility. The APHBM2012SURKCGKC uses a 0805 (2012 Metric) package versus the 0807 package of the SM0807BC-RP. The reduced width (1.25mm vs 1.80mm) and height (0.45mm vs 1.10mm) may allow mounting on existing 0807 pads with potential rework, but this must be confirmed against specific PCB layout and solder pad dimensions.

Q: What are the electrical differences between these parts?

A: Forward voltage for green elements is identical at 2.1V. Red forward voltage differs slightly: SM0807BC-RP at 1.8V nominal versus APHBM2012SURKCGKC at 1.95V nominal. Both operate at 20mA test current. The APHBM2012SURKCGKC produces significantly higher brightness (50mcd green, 80mcd red) compared to SM0807BC-RP (13mcd green, 19mcd red) due to clear lens versus diffused lens design.

Q: Are both parts RoHS compliant?

A: Yes. Both SM0807BC-RP and APHBM2012SURKCGKC are ROHS3 compliant with EAR99 ECCN classification and identical HTSUS code 8541.41.0000.

Q: What is the impact of lens transparency differences?

A: SM0807BC-RP features a diffused lens producing softer, more dispersed light output at lower brightness levels. APHBM2012SURKCGKC features a clear lens producing more focused, higher-intensity light output. Application requirements for light diffusion and brightness must determine which lens type is appropriate.

Q: How do moisture sensitivity levels affect storage and handling?

A: SM0807BC-RP has MSL 4 rating (72-hour floor life after moisture exposure). APHBM2012SURKCGKC has MSL 3 rating (168-hour floor life after moisture exposure). Lower MSL numbers indicate greater tolerance to moisture and longer usable floor life after moisture absorption, providing handling flexibility for APHBM2012SURKCGKC.

Q: Are viewing angles equivalent?

A: Yes. Both parts maintain 120° viewing angle, ensuring equivalent light distribution characteristics in the application.