SLW-107-01-S-D Equivalent & Substitute Parts

Part Overview

The SLW-107-01-S-D is a 14-position rectangular receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.100" (2.54mm) pitch spacing. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is currently active in production with 1135 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct functional replacement in applications where the original part is unavailable, obsolete, or when design flexibility permits alternative configurations.

Substiute Parts

SLW-107-01-S-D

Samtec Inc.In Stock: 1160SLW-107-01-S-D Datasheet

Current PartRFQ

929870-01-07-RB

3MIn Stock: 1531929870-01-07-RB Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The identified substitute part 929870-01-07-RB from 3M shares the following critical parameters with the SLW-107-01-S-D:

• Connector Type: Receptacle
• Pitch - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Fastening Type: Push-Pull
• Contact Finish - Mating: Gold
• Contact Finish Thickness - Mating: 30.0µin (0.76µm)
• Insulation Color: Black
• Contact Shape: Square
• Style: Board to Board

The 929870-01-07-RB differs in position count (7 positions vs. 14 positions) and row configuration (1 row vs. 2 rows), making it suitable only for applications requiring reduced contact density within the same electrical and mechanical interface standard.

Parameter Comparison

Engineering Selection Recommendations

Both the SLW-107-01-S-D and 929870-01-07-RB maintain active product status and comply with RoHS regulations. The SLW-107-01-S-D supports an extended operating temperature range of -55°C to 125°C, while the 929870-01-07-RB operates within -40°C to 105°C. Selection between these parts depends on application requirements for contact count and temperature performance. The 929870-01-07-RB is suitable only for applications requiring 7 or fewer signal connections within the specified temperature and electrical parameters.

Frequently Asked Questions (FAQ)

Q: Can the 929870-01-07-RB directly replace the SLW-107-01-S-D?

A: Direct replacement is not possible due to different position counts (7 vs. 14) and row configurations (1 vs. 2). The 929870-01-07-RB is suitable only for applications requiring reduced contact density.

Q: What are the critical compatibility parameters between these connectors?

A: Both connectors share 0.100" (2.54mm) pitch spacing, through-hole solder termination, push-pull fastening, and gold-plated mating contacts. These parameters ensure mechanical and electrical interface compatibility at the connector level.

Q: Are there temperature limitations when using the 929870-01-07-RB as a substitute?

A: The 929870-01-07-RB operates within -40°C to 105°C, which is narrower than the SLW-107-01-S-D range of -55°C to 125°C. Applications requiring operation below -40°C or above 105°C must use the SLW-107-01-S-D.

Q: Do both connectors meet RoHS compliance requirements?

A: Yes. The SLW-107-01-S-D is ROHS3 compliant, and the 929870-01-07-RB is RoHS compliant. Both parts satisfy RoHS regulatory requirements.

Q: What is the difference in insulation material between these connectors?

A: The SLW-107-01-S-D uses polyester glass-filled insulation, while the 929870-01-07-RB uses polybutylene terephthalate (PBT) glass-filled insulation. Both materials are suitable for board-to-board applications.