SLPX822M080H4P3 Equivalent & Substitute Parts

Part Overview

The SLPX822M080H4P3 is an 8200 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part is currently Active in product status with 742 pieces available in inventory. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to inventory constraints, application redesign, or supply chain considerations.

Substiute Parts

SLPX822M080H4P3

Cornell Dubilier Electronics (CDE)In Stock: 778SLPX822M080H4P3 Datasheet

Current PartRFQ

380LX822M080A052

Cornell Dubilier Electronics (CDE)In Stock: 4286380LX822M080A052 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SLPX822M080H4P3 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance: 8200 µF (exact match)
• Voltage Rating: 80 V (exact match)
• Tolerance: ±20% (exact match)
• ESR @ 120Hz: 40 mOhm (exact match)
• Lifetime @ 85°C: 3000 Hrs (exact match)
• Operating Temperature Range: -40°C to 85°C (exact match)

Mechanical Equivalence Requirements:

• Lead Spacing: 10.00 mm (exact match)
• Diameter: 35.00 mm (exact match)
• Package Type: Radial, Can - Snap-In (exact match)
• Mounting Type: Through Hole (exact match)

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected
• Active product status

The substitute part 380LX822M080A052 meets all electrical and mechanical equivalence criteria. Physical height variation is permitted within the snap-in package design constraints, as the lead spacing and diameter remain constant for PCB compatibility.

Parameter Comparison

Engineering Selection Recommendations

SLPX822M080H4P3 Selection Criteria:

• Primary choice when inventory availability of 742 pieces meets project requirements
• Active product status ensures continued manufacturer support and availability
• ROHS3 compliance and REACH unaffected status satisfy regulatory requirements

380LX822M080A052 Selection Criteria:

• Substitute selection when higher inventory availability (4240 pieces) is required
• Identical electrical specifications ensure functional equivalence in circuit applications
• Active product status and equivalent compliance certifications support long-term supply chain stability
• Physical height difference (52.00 mm vs. 45.00 mm) requires verification of available PCB clearance in the vertical direction
• Identical lead spacing (10.00 mm) and diameter (35.00 mm) ensure PCB footprint compatibility

Both parts are manufactured by Cornell Dubilier Electronics and maintain Active product status, ensuring continued availability and manufacturer support for production applications.

Frequently Asked Questions (FAQ)

Q: Can the 380LX822M080A052 be used as a direct replacement for the SLPX822M080H4P3?

A: The 380LX822M080A052 is electrically and mechanically equivalent for all critical parameters including capacitance, voltage rating, ESR, and lead spacing. The primary consideration is the increased seated height (52.00 mm vs. 45.00 mm). Verify that available vertical clearance on the PCB accommodates this dimension before substitution.

Q: What parameters must remain identical for substitution to be valid?

A: Capacitance (8200 µF), voltage rating (80 V), tolerance (±20%), ESR @ 120Hz (40 mOhm), lifetime @ 85°C (3000 Hrs), operating temperature range (-40°C to 85°C), lead spacing (10.00 mm), diameter (35.00 mm), and package type (Radial, Can - Snap-In) must all remain identical.

Q: Are there differences in ripple current ratings between these parts?

A: Minor differences exist in ripple current specifications. The SLPX822M080H4P3 provides 5.89 A @ 120 Hz and 7.36 A @ 20 kHz, while the 380LX822M080A052 provides 5.8 A @ 120 Hz and 6.7 A @ 20 kHz. Both values are equivalent for general-purpose applications within the specified operating parameters.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the SLPX822M080H4P3 and 380LX822M080A052 are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for industrial and commercial applications.

Q: What is the significance of the different series designations (SLPX vs. 380LX)?

A: The series designation indicates the internal product line within Cornell Dubilier Electronics. Despite different series names, both parts meet identical electrical and mechanical specifications for the 8200 µF, 80 V rating, making them functionally equivalent for circuit applications.

Q: Is PCB layout modification required when substituting these parts?

A: No PCB layout modification is required for the footprint itself, as lead spacing and diameter are identical. However, verify that the increased height of the 380LX822M080A052 (52.00 mm) does not conflict with components or enclosure constraints in the vertical direction.