SLPX562M080H5P3 Equivalent & Substitute Parts

Part Overview

The SLPX562M080H5P3 is a 5600 µF, 80 V aluminum electrolytic capacitor with radial, snap-in configuration manufactured by Cornell Dubilier Electronics (CDE). This component is rated for general-purpose applications with a 3000-hour lifetime at 85°C and operates across the temperature range of -40°C to 85°C. The part remains in active product status, with established equivalents and substitutes available within the CDE product portfolio. Alternative parts are necessary to accommodate supply chain variations, inventory availability, and application-specific mechanical constraints such as form factor differences.

Key Parameters

Parameter	Value
Manufacturer	Cornell Dubilier Electronics (CDE)
Part Number	SLPX562M080H5P3
Series	SLPX
Capacitance	5600 µF
Tolerance	±20%
Voltage Rating	80 V
ESR @ 120 Hz	59 mOhm
Lifetime @ 85°C	3000 Hours
Operating Temperature Range	-40°C to 85°C
Lead Spacing	0.394" (10.00 mm)
Case Diameter	1.378" (35.00 mm)
Height (Seated Max)	1.378" (35.00 mm)
Mounting Type	Through Hole
Package Type	Radial, Can - Snap-In
RoHS Status	ROHS3 Compliant
Polarization	Polar

Substitute Part Grouping Explanation

Substitution of the SLPX562M080H5P3 capacitor is determined by strict equivalence across the following critical electrical and mechanical parameters:

Electrical Equivalence Criteria:

Capacitance value: 5600 µF (±20% tolerance)
Voltage rating: 80 V minimum
Temperature lifetime: 3000 hours at 85°C
Operating temperature range: -40°C to 85°C
Polarization: Polar

Mechanical Compatibility Criteria:

Lead spacing: 0.394" (10.00 mm)
Mounting type: Through hole, snap-in configuration
Package type: Radial aluminum electrolytic can

The substitute parts identified—380LX562M080A032 and 380LX562M080K452—maintain all critical electrical parameters and lead spacing, ensuring functional and footprint compatibility. Both substitutes belong to the 380LX series and carry the same capacitance, voltage rating, tolerance, temperature range, and lifetime specifications. Differences in case diameter and height are permitted when mechanical board envelope space is available.

Parameter Comparison

Parameter	SLPX562M080H5P3	380LX562M080A032	380LX562M080K452
Manufacturer	CDE	CDE	CDE
Capacitance	5600 µF	5600 µF	5600 µF
Voltage Rating	80 V	80 V	80 V
Tolerance	±20%	±20%	±20%
ESR @ 120 Hz	59 mOhm	55 mOhm	55 mOhm
Ripple Current @ 120 Hz	4.64 A	4.6 A	4.55 A
Ripple Current @ 20 kHz	5.8 A	5.2 A	5.23 A
Lifetime @ 85°C	3000 Hours	3000 Hours	3000 Hours
Operating Temperature	-40°C to 85°C	-40°C to 85°C	-40°C to 85°C
Lead Spacing	0.394" (10.00 mm)	0.394" (10.00 mm)	0.394" (10.00 mm)
Case Diameter	1.378" (35.00 mm)	1.378" (35.00 mm)	1.181" (30.00 mm)
Height (Seated Max)	1.378" (35.00 mm)	1.457" (37.00 mm)	1.850" (47.00 mm)
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Mounting Type	Through Hole	Through Hole	Through Hole

Engineering Selection Recommendations

All three parts—SLPX562M080H5P3, 380LX562M080A032, and 380LX562M080K452—maintain active product status with CDE and maintain ROHS3 compliance. Selection between these parts is determined by mechanical space constraints and ripple current requirements.

The SLPX562M080H5P3 offers the highest ripple current capacity at 20 kHz (5.8 A) and occupies a compact footprint with 1.378" diameter and height.

The 380LX562M080A032 provides a direct mechanical substitute with identical case diameter while accepting a 0.079" height increase to 1.457". This part maintains superior ESR performance at 55 mOhm compared to the original 59 mOhm specification.

The 380LX562M080K452 features the smallest case diameter (1.181") but requires the greatest height accommodation at 1.850". This configuration is suitable for applications where radial footprint minimization is prioritized over vertical space.

Frequently Asked Questions (FAQ)

Q: Are these parts electrically interchangeable? A: All three capacitors share identical electrical specifications: 5600 µF capacitance at 80 V with ±20% tolerance, 3000-hour lifetime at 85°C, and -40°C to 85°C operating range. The ESR differences between parts (59 mOhm for SLPX562M080H5P3 versus 55 mOhm for the 380LX variants) represent minor performance advantages in the substitutes. Lead spacing is uniform at 0.394" (10.00 mm) across all three parts, ensuring PCB compatibility without modification.

Q: What are the primary mechanical differences? A: The primary mechanical distinction is case form factor. The SLPX562M080H5P3 and 380LX562M080A032 maintain 1.378" case diameter, with the latter requiring 0.079" additional height. The 380LX562M080K452 reduces case diameter to 1.181" but extends height to 1.850", accommodating space-constrained radial layouts where vertical clearance is available.

Q: Can I substitute one part for another on existing designs? A: Direct substitution requires verification of available board space. If the original design accommodates the SLPX562M080H5P3's 1.378" diameter and 1.378" height, the 380LX562M080A032 is suitable with the additional 0.079" height allowance. The 380LX562M080K452 requires confirmation that the board envelope can accommodate its 1.850" height, though its reduced 1.181" diameter may provide clearance advantages.

Q: What compliance certifications apply to all three parts? A: All three parts maintain ROHS3 compliance and REACH Unaffected status. All are classified under ECCN EAR99 and HTSUS 8532.22.0040 for tariff and export purposes.

Copy this content into your web Markdown editor. The HTML tables will render correctly and the formatting adheres to all specified requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message