SLPX562M080E4P3 Equivalent & Substitute Parts Reference

Part Overview

The SLPX562M080E4P3 is a 5600 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part is ROHS3 compliant and REACH unaffected, meeting current environmental standards.

Substitute parts become necessary when the primary part experiences extended lead times, inventory constraints, or when design flexibility permits selection from equivalent alternatives within the same electrical and mechanical parameter envelope. The substitute parts listed maintain identical or compatible electrical specifications while offering variations in physical dimensions and ESR characteristics.

Key Parameters

Parameter	Value	Unit
Capacitance	5600	µF
Voltage - Rated	80	V
Tolerance	±20%	-
ESR @ 120Hz	59	mOhm
Lifetime @ 85°C	3000	Hrs
Operating Temperature Range	-40°C ~ 85°C	-
Lead Spacing	0.394" (10.00mm)	-
Package Type	Radial, Can - Snap-In	-
Mounting Type	Through Hole	-
Polarization	Polar	-

Substitute Part Grouping Explanation

Substitution eligibility for the SLPX562M080E4P3 is determined by strict adherence to the following electrical and mechanical parameters:

Critical Parameters (Must Match Exactly):

Capacitance: 5600 µF
Voltage Rating: 80 V
Tolerance: ±20%
Polarization: Polar
Lifetime: 3000 Hrs @ 85°C
Operating Temperature: -40°C ~ 85°C
Lead Spacing: 0.394" (10.00mm)
Package Type: Radial, Can - Snap-In
Mounting Type: Through Hole

Allowable Variation Parameters:

ESR @ 120Hz: Acceptable range 55-59 mOhm (lower ESR values are acceptable)
Physical Dimensions (Diameter/Height): Variations permitted within snap-in package constraints
Ripple Current: Minor variations acceptable within general-purpose application tolerance

Both substitute parts (380LX562M080K452 and 380LX562M080A032) satisfy all critical parameters and are classified as direct or similar manufacturer equivalents from Cornell Dubilier Electronics.

Parameter Comparison

Parameter	SLPX562M080E4P3	380LX562M080K452	380LX562M080A032
Manufacturer	Cornell Dubilier Electronics	Cornell Dubilier Electronics	Cornell Dubilier Electronics
Capacitance	5600 µF	5600 µF	5600 µF
Voltage - Rated	80 V	80 V	80 V
Tolerance	±20%	±20%	±20%
ESR @ 120Hz	59 mOhm	55 mOhm	55 mOhm
Lifetime @ 85°C	3000 Hrs	3000 Hrs	3000 Hrs
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Ripple Current @ 120Hz	4.7 A	4.55 A	4.6 A
Ripple Current @ 20kHz	5.88 A	5.23 A	5.2 A
Lead Spacing	0.394" (10.00mm)	0.394" (10.00mm)	0.394" (10.00mm)
Size / Diameter	1.181" (30.00mm)	1.181" (30.00mm)	1.378" (35.00mm)
Height - Seated (Max)	1.772" (45.00mm)	1.850" (47.00mm)	1.457" (37.00mm)
Package / Case	Radial, Can - Snap-In	Radial, Can - Snap-In	Radial, Can - Snap-In
Mounting Type	Through Hole	Through Hole	Through Hole
Product Status	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
REACH Status	REACH Unaffected	REACH Unaffected	REACH Unaffected
Inventory Status	1084 Pcs New Original	1126 Pcs New Original	1835 Pcs New Original

Engineering Selection Recommendations

SLPX562M080E4P3 (Primary Part): Select this part when the original design specification explicitly requires the SLPX series designation or when the specific ESR value of 59 mOhm @ 120Hz is a design requirement. This part maintains the smallest physical footprint among the three options (1.181" diameter, 1.772" height) and is suitable for space-constrained applications.

380LX562M080K452 (Direct Substitute): This part is classified as a direct manufacturer equivalent and offers improved ESR performance at 55 mOhm @ 120Hz, representing a 6.8% reduction in equivalent series resistance. Physical dimensions are nearly identical to the primary part (1.181" diameter, 1.850" height), with only a 0.078" increase in seated height. This part is suitable for applications where lower ESR is beneficial and space permits the minimal height increase. Product status is Active with ROHS3 compliance and REACH unaffected designation.

380LX562M080A032 (Similar Substitute): This part is classified as a similar manufacturer equivalent and also provides 55 mOhm @ 120Hz ESR performance. Physical dimensions differ more significantly, with a larger diameter (1.378" vs. 1.181") but reduced height (1.457" vs. 1.772"). This part is suitable for applications where vertical space is constrained but horizontal space is available. Product status is Active with ROHS3 compliance and REACH unaffected designation.

All three parts share identical electrical specifications for capacitance, voltage rating, tolerance, lifetime, and operating temperature range. Selection between them depends on physical space constraints within the PCB layout and lead frame configuration.

Frequently Asked Questions (FAQ)

Q: Can 380LX562M080K452 be used as a direct replacement for SLPX562M080E4P3?

A: Yes. Both parts maintain identical capacitance (5600 µF), voltage rating (80 V), tolerance (±20%), lifetime (3000 Hrs @ 85°C), operating temperature range (-40°C ~ 85°C), lead spacing (10.00mm), and snap-in package configuration. The 380LX562M080K452 features lower ESR (55 mOhm vs. 59 mOhm @ 120Hz) and slightly increased seated height (1.850" vs. 1.772"). PCB layout verification is required to confirm the 0.078" height increase is accommodated.

Q: Can 380LX562M080A032 be used as a direct replacement for SLPX562M080E4P3?

A: Yes, with physical layout verification. Both parts maintain identical electrical specifications. However, the 380LX562M080A032 has a larger diameter (1.378" vs. 1.181") and reduced height (1.457" vs. 1.772"). PCB footprint and component clearance must be verified before substitution to ensure the larger diameter does not create interference with adjacent components.

Q: What is the difference in ESR between the main part and the substitutes?

A: The SLPX562M080E4P3 has an ESR of 59 mOhm @ 120Hz. Both substitute parts (380LX562M080K452 and 380LX562M080A032) have an ESR of 55 mOhm @ 120Hz, representing a 4 mOhm (6.8%) reduction. Lower ESR values reduce heat generation and improve ripple current handling capability.

Q: Are all three parts RoHS3 compliant?

A: Yes. SLPX562M080E4P3, 380LX562M080K452, and 380LX562M080A032 are all ROHS3 compliant and REACH unaffected, meeting current environmental regulatory requirements.

Q: What is the lead spacing for all three parts?

A: All three parts have identical lead spacing of 0.394" (10.00mm), ensuring compatibility with the same PCB through-hole pattern and snap-in mounting frame.

Q: Which part should be selected for space-constrained applications?

A: For horizontal space constraints, select SLPX562M080E4P3 or 380LX562M080K452 (both 1.181" diameter). For vertical space constraints, select 380LX562M080A032 (1.457" height). Verify PCB layout dimensions before final selection.

Q: Are the ripple current ratings identical across all three parts?

A: No. Ripple current ratings vary slightly: SLPX562M080E4P3 (4.7 A @ 120Hz, 5.88 A @ 20kHz), 380LX562M080K452 (4.55 A @ 120Hz, 5.23 A @ 20kHz), and 380LX562M080A032 (4.6 A @ 120Hz, 5.2 A @ 20kHz). Applications with high ripple current requirements should verify the selected part meets the design specification.

Q: What is the current inventory status for each part?

A: SLPX562M080E4P3 has 1084 pieces in stock, 380LX562M080K452 has 1126 pieces in stock, and 380LX562M080A032 has 1835 pieces in stock. All parts are listed as new original inventory.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message