SLPX562M050C5P3 Equivalent & Substitute Parts

Part Overview

The SLPX562M050C5P3 is a 5600 µF, 50 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general purpose applications requiring high capacitance values in through-hole mounting configurations. Substitute parts are identified when inventory constraints, lead time requirements, or specific performance characteristics necessitate alternative Cornell Dubilier Electronics components with equivalent electrical and mechanical specifications.

Substiute Parts

SLPX562M050C5P3

Cornell Dubilier Electronics (CDE)In Stock: 751SLPX562M050C5P3 Datasheet

Current PartRFQ

380LX562M050J032

Cornell Dubilier Electronics (CDE)In Stock: 2281380LX562M050J032 Datasheet

SimilarRFQ

380LX562M050K022

Cornell Dubilier Electronics (CDE)In Stock: 1280380LX562M050K022 Datasheet

SimilarRFQ

SLPX562M050A7P3

Cornell Dubilier Electronics (CDE)In Stock: 10683SLPX562M050A7P3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SLPX562M050C5P3 is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Capacitance: 5600 µF (exact match required)
• Voltage Rating: 50 V (exact match required)
• Tolerance: ±20% (exact match required)
• Polarization: Polar (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Type: Radial, Can - Snap-In (exact match required)
• Lead Spacing: 0.394" (10.00 mm) (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Lifetime: 3000 Hrs @ 85°C (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

Allowable Variation Parameters:

• ESR @ 120Hz: Variation permitted within component series design specifications
• Physical Dimensions (Diameter, Height): Variation permitted provided lead spacing and mounting type remain unchanged
• Ripple Current Ratings: Variation permitted based on ESR differences
• Moisture Sensitivity Level: Variation permitted

All identified substitute parts meet the mandatory equivalence criteria and are manufactured by Cornell Dubilier Electronics.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts—380LX562M050J032, 380LX562M050K022, and SLPX562M050A7P3—are Active status components manufactured by Cornell Dubilier Electronics and maintain full ROHS3 compliance. Selection among these alternatives is based on the following engineering considerations:

SLPX562M050A7P3 maintains identical ESR characteristics (83 mOhm @ 120Hz) to the primary part SLPX562M050C5P3, ensuring equivalent electrical performance in ripple current handling and thermal dissipation. This part is available in higher inventory (10,605 pcs) and operates within the same SLPX series design parameters. Physical dimensions differ (0.866" diameter, 1.575" height), requiring verification of available board space.

380LX562M050J032 and 380LX562M050K022 feature reduced ESR (60 mOhm @ 120Hz), resulting in lower equivalent series resistance and improved ripple current performance at high frequencies. Both parts are manufactured in the 380LX series with ROHS3 compliance and Moisture Sensitivity Level 1 (Unlimited). Physical dimensions vary between these two parts: 380LX562M050J032 maintains 0.984" diameter (matching primary part) with 1.457" height; 380LX562M050K022 features 1.181" diameter with 1.260" height. Selection depends on available PCB footprint and thermal management requirements.

All substitute parts maintain identical capacitance, voltage rating, tolerance, operating temperature range, and lifetime specifications as the primary SLPX562M050C5P3 component.

Frequently Asked Questions (FAQ)

Q: Can SLPX562M050A7P3 be used as a direct replacement for SLPX562M050C5P3?

A: Yes. Both parts share identical electrical specifications (5600 µF, 50 V, ±20%, 83 mOhm ESR @ 120Hz, 3000 Hrs @ 85°C) and mounting characteristics (through-hole, radial snap-in, 10.00 mm lead spacing). Physical dimensions differ; verify available board space before substitution.

Q: What is the difference between the 380LX series and SLPX series substitutes?

A: Both series are manufactured by Cornell Dubilier Electronics and meet all mandatory equivalence criteria. The 380LX series (380LX562M050J032, 380LX562M050K022) features lower ESR (60 mOhm @ 120Hz) compared to the SLPX series (83 mOhm @ 120Hz), resulting in improved high-frequency ripple current performance. Series selection depends on application ripple current requirements and available board space.

Q: Are physical dimension differences between substitute parts critical?

A: Yes. While all parts maintain identical lead spacing (10.00 mm), diameter and height vary. Verify PCB footprint clearances and available vertical space before selecting a substitute. The SLPX562M050A7P3 (0.866" diameter, 1.575" height) and 380LX562M050K022 (1.181" diameter, 1.260" height) represent the smallest and most compact options respectively.

Q: Do all substitute parts maintain RoHS3 compliance?

A: Yes. SLPX562M050C5P3, 380LX562M050J032, 380LX562M050K022, and SLPX562M050A7P3 are all ROHS3 Compliant and REACH Unaffected.

Q: What is the inventory status of each substitute part?

A: SLPX562M050C5P3: 660 pcs; SLPX562M050A7P3: 10,605 pcs; 380LX562M050J032: 2,264 pcs; 380LX562M050K022: 1,209 pcs. All parts are listed as New Original In Stock.

Q: Can 380LX562M050J032 and 380LX562M050K022 be used interchangeably?

A: Both parts share identical electrical specifications (5600 µF, 50 V, ±20%, 60 mOhm ESR @ 120Hz, 3000 Hrs @ 85°C) and mounting type. Physical dimensions differ significantly (diameter: 0.984" vs. 1.181"; height: 1.457" vs. 1.260"). Selection depends on available PCB space and thermal layout requirements.