SLP682M080H4P3 Equivalent & Substitute Parts

Part Overview

The SLP682M080H4P3 is a 6800 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in configuration. This component is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part is currently Active in product status with 1111 pieces available in inventory. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility allow direct replacement in circuit designs, particularly when primary inventory becomes unavailable or when alternative packaging configurations are acceptable.

Substiute Parts

SLP682M080H4P3

Cornell Dubilier Electronics (CDE)In Stock: 1125SLP682M080H4P3 Datasheet

Current PartRFQ

383LX682M080A052

Cornell Dubilier Electronics (CDE)In Stock: 905383LX682M080A052 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of aluminum electrolytic capacitors is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value must be identical: 6800 µF
• Voltage rating must be equal or greater: 80 V minimum
• Tolerance must be compatible: ±20%
• Operating temperature range must encompass or match: -40°C ~ 105°C
• Lifetime specification must meet or exceed: 3000 Hrs @ 105°C

Mechanical Compatibility Requirements:

• Mounting type must be Through Hole
• Package configuration must be Radial, Can - Snap-In or compatible variant
• Physical dimensions must allow board-level installation

Compliance Requirements:

• RoHS3 Compliant status required
• REACH Unaffected status required

The substitute part 383LX682M080A052 meets all electrical equivalence criteria and maintains compliance certifications. The primary mechanical difference is the 4-lead configuration and increased seated height (52.00mm vs. 45.00mm), which must be evaluated for specific board layout constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the SLP682M080H4P3 and 383LX682M080A052 are Active products manufactured by Cornell Dubilier Electronics and maintain full ROHS3 and REACH compliance. Selection between these parts is based on the following engineering considerations:

SLP682M080H4P3 Selection Criteria:

• Standard snap-in configuration with established board layout compatibility
• Seated height of 45.00mm provides compact vertical profile
• Higher inventory availability (1111 pieces)
• ESR specification provided: 49mOhm @ 120Hz
• Ripple current ratings specified at both low and high frequencies

383LX682M080A052 Selection Criteria:

• 4-lead snap-in variant with increased mechanical robustness
• Seated height of 52.00mm requires additional vertical clearance
• Suitable for applications where lead configuration provides enhanced mechanical retention
• Adequate inventory availability (824 pieces)

Both parts deliver identical electrical performance across capacitance, voltage rating, tolerance, temperature range, and lifetime specifications. The decision between these substitutes depends solely on physical space constraints and mechanical mounting requirements specific to the application circuit board.

Frequently Asked Questions (FAQ)

Q: Can the 383LX682M080A052 directly replace the SLP682M080H4P3 in all applications?

A: Electrical substitution is complete. The 383LX682M080A052 provides identical capacitance (6800 µF), voltage rating (80 V), tolerance (±20%), operating temperature range (-40°C ~ 105°C), and lifetime (3000 Hrs @ 105°C). Mechanical compatibility depends on board layout. The increased seated height of 52.00mm versus 45.00mm and the 4-lead configuration must be accommodated in the physical design.

Q: What is the significance of the 4-lead configuration in the 383LX682M080A052?

A: The 4-lead snap-in variant provides four connection points instead of the standard configuration, offering enhanced mechanical stability and retention on the circuit board. This configuration is functionally equivalent for electrical performance but requires board layout designed to accommodate the additional lead structure.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both SLP682M080H4P3 and 383LX682M080A052 are ROHS3 Compliant and REACH Unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Q: What is the difference in ESR between these two parts?

A: The SLP682M080H4P3 specifies ESR of 49mOhm @ 120Hz. The 383LX682M080A052 does not provide an ESR specification in the available data. Both parts meet the same lifetime and temperature specifications, indicating equivalent performance characteristics for general-purpose applications.

Q: Which part should be selected for new designs?

A: Selection is based on physical board constraints and mechanical mounting preferences. The SLP682M080H4P3 offers a more compact profile (45.00mm height). The 383LX682M080A052 provides a 4-lead configuration for enhanced mechanical retention. Both are Active products with adequate inventory and full compliance certifications.

Q: Are the lead spacing specifications different between these parts?

A: The SLP682M080H4P3 specifies lead spacing of 0.394" (10.00mm). The 383LX682M080A052 does not provide lead spacing data. Both maintain the same radial can diameter of 1.378" (35.00mm), indicating compatible footprint dimensions for standard snap-in mounting applications.