SLP682M035C5P3

Part Overview

The SLP682M035C5P3 is a 6800 µF, 35 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This capacitor is actively produced and rated for general-purpose applications with an operational lifetime of 3000 hours at 105°C. Alternative equivalent parts are available from the same manufacturer's SLP0712TE series, which provides design flexibility for different board layout constraints and inventory availability.

Key Parameters

Parameter	Value
Capacitance	6800 µF
Voltage Rating	35 V
Tolerance	±20%
ESR (Equivalent Series Resistance)	78 mOhm @ 120 Hz
Lifetime at Temperature	3000 Hrs @ 105°C
Operating Temperature Range	-40°C ~ 105°C
Package Type	Radial, Can - Snap-In
Mounting Type	Through Hole
Lead Spacing	0.394" (10.00 mm)
Polarization	Polar
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution between SLP682M035C5P3, SLP682M035A7P3, and SLP682M035E1P3 is permissible based on the following electrical and mechanical criteria:

Electrical Equivalence Requirements Met:

Identical capacitance: 6800 µF
Identical voltage rating: 35 V
Identical tolerance: ±20%
Identical ESR specification: 78 mOhm
Identical lifetime rating: 3000 Hrs @ 105°C
Identical operating temperature range: -40°C ~ 105°C

Mechanical Compatibility:

All three parts feature identical lead spacing: 0.394" (10.00 mm)
All three are packaged as radial, can snap-in components
All three are through-hole mounted devices
Physical dimensions vary (diameter and height), requiring board layout verification

Compliance Alignment:

All three parts maintain ROHS3 compliance
All three carry REACH Unaffected status
All three fall under ECCN EAR99 and HTSUS 8532.22.0040

Parameter Comparison

Parameter	SLP682M035C5P3	SLP682M035A7P3	SLP682M035E1P3
Capacitance	6800 µF	6800 µF	6800 µF
Voltage Rating	35 V	35 V	35 V
Tolerance	±20%	±20%	±20%
ESR	78 mOhm @ 120 Hz	78 mOhm	78 mOhm @ 120 Hz
Lifetime @ Temp.	3000 Hrs @ 105°C	3000 Hrs @ 105°C	3000 Hrs @ 105°C
Operating Temperature	-40°C ~ 105°C	-40°C ~ 105°C	-40°C ~ 105°C
Lead Spacing	0.394" (10.00 mm)	0.394" (10.00 mm)	0.394" (10.00 mm)
Size / Diameter	0.984" (25.00 mm)	0.866" (22.00 mm)	1.181" (30.00 mm)
Height - Seated (Max)	1.378" (35.00 mm)	1.575" (40.00 mm)	0.984" (25.00 mm)
Package / Case	Radial, Can - Snap-In	Radial, Can - Snap-In	Radial, Can - Snap-In
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

All three parts—SLP682M035C5P3, SLP682M035A7P3, and SLP682M035E1P3—are Active products manufactured by Cornell Dubilier Electronics and maintain full ROHS3 compliance and REACH Unaffected status, ensuring regulatory compatibility across all substitution scenarios.

Selection between these parts should be determined by physical space constraints on the printed circuit board:

SLP682M035A7P3 offers the smallest radial footprint with a 0.866" (22.00 mm) diameter, suitable for compact layouts with vertical height clearance of 1.575" (40.00 mm).
SLP682M035C5P3 provides a moderate footprint at 0.984" (25.00 mm) diameter with a seated height of 1.378" (35.00 mm).
SLP682M035E1P3 accommodates larger diameter installations at 1.181" (30.00 mm) with the lowest profile at 0.984" (25.00 mm) height, suitable for space-constrained vertical applications.

All three maintain electrical equivalence and are suitable for general-purpose applications requiring 6800 µF capacitance at 35 V with 3000-hour lifetime ratings at 105°C.

Frequently Asked Questions (FAQ)

Q: Are all three parts electrically interchangeable? A: Yes. All parts share identical electrical specifications: 6800 µF capacitance, 35 V voltage rating, ±20% tolerance, 78 mOhm ESR, and 3000 Hrs @ 105°C lifetime. Lead spacing is identical at 0.394" (10.00 mm) across all three variants.

Q: What is the primary difference between these substitutes? A: Physical dimensions differ. The SLP682M035A7P3 has the smallest diameter (22.00 mm), the SLP682M035C5P3 is mid-size (25.00 mm), and the SLP682M035E1P3 is the largest diameter (30.00 mm). Heights range from 25.00 mm to 40.00 mm. Lead spacing remains constant.

Q: Can I substitute parts based solely on PCB layout space? A: Yes. Verify that the selected part's diameter and height fit within the available space on your circuit board. Since all parts are through-hole mounted with identical lead spacing, mechanical clearance is the determining factor for substitution.

Q: Are all three parts available in the same packaging and compliance certifications? A: Yes. All parts are supplied in Bulk packaging, are ROHS3 compliant, carry REACH Unaffected status, and fall under ECCN EAR99 classification with identical HTSUS coding (8532.22.0040).

Q: Which part should I choose if space is not a constraint? A: Any of the three parts will function identically in your circuit. If no space constraints exist, the SLP682M035C5P3 (original specification) or the substitute with the best availability inventory level can be selected.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message