SLP561M220C5P3 Equivalent & Substitute Parts

Part Overview

The SLP561M220C5P3 is a 560 µF, 220 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general-purpose applications requiring stable capacitance and extended operational life at elevated temperatures. The part operates across a temperature range of -25°C to 105°C with a rated lifetime of 3000 hours at 105°C.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained within the allowed specifications for this product category, ensuring functional compatibility in target applications.

Substiute Parts

SLP561M220C5P3

Cornell Dubilier Electronics (CDE)In Stock: 829SLP561M220C5P3 Datasheet

Current PartRFQ

LGW2E561MELA35

NichiconIn Stock: 2501LGW2E561MELA35 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SLP561M220C5P3 are qualified based on the following criteria:

Electrical Compatibility:

• Capacitance value must equal 560 µF
• Tolerance must be ±20% or tighter
• Voltage rating must be equal to or greater than 220 V
• Lifetime at 105°C must be equal to or greater than 3000 hours
• Operating temperature range must encompass or exceed -25°C to 105°C

Mechanical Compatibility:

• Package type must be Radial, Can - Snap-In
• Lead spacing must be 10.00 mm (0.394")
• Physical dimensions (diameter 25.00 mm, height 35.00 mm maximum) must match
• Mounting type must be Through Hole

Regulatory Compliance:

• RoHS3 compliance required
• REACH Unaffected status required

The substitute part LGW2E561MELA35 meets all electrical and mechanical compatibility criteria for direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The LGW2E561MELA35 manufactured by Nichicon qualifies as a direct substitute for the SLP561M220C5P3. Both components maintain Active product status and full regulatory compliance under ROHS3 and REACH standards.

The substitute part provides equivalent electrical performance with identical capacitance (560 µF), tolerance (±20%), and thermal lifetime (3000 hours at 105°C). Mechanical compatibility is confirmed through matching lead spacing (10.00 mm), physical dimensions (25.00 mm diameter, 35.00 mm maximum height), and package configuration (Radial, Can - Snap-In, Through Hole).

The LGW2E561MELA35 offers an elevated voltage rating (250 V versus 220 V) and an extended lower operating temperature limit (-40°C versus -25°C), providing enhanced performance margins in applications where these parameters are beneficial.

Frequently Asked Questions (FAQ)

Q: Can the LGW2E561MELA35 be used in place of the SLP561M220C5P3 without circuit modification?

A: Yes. Both components share identical capacitance (560 µF), tolerance (±20%), lead spacing (10.00 mm), and physical dimensions (25.00 mm diameter, 35.00 mm height). The snap-in package configuration and through-hole mounting are identical. No circuit modification is required.

Q: What is the significance of the higher voltage rating on the substitute part?

A: The LGW2E561MELA35 is rated for 250 V compared to the original 220 V rating. A higher voltage rating does not degrade performance in circuits operating at or below the original voltage specification. This provides additional safety margin in the application.

Q: Are there differences in ripple current handling between these parts?

A: The substitute part (LGW2E561MELA35) exhibits higher ripple current capacity at both low frequency (2.25 A @ 120 Hz versus 1.64 A @ 120 Hz) and high frequency (3.375 A @ 50 kHz versus 2.41 A @ 20 kHz). This represents improved performance capability.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both the SLP561M220C5P3 and LGW2E561MELA35 are ROHS3 Compliant and REACH Unaffected, meeting identical regulatory standards for electronic component deployment.

Q: Is the operating temperature range difference significant?

A: The substitute part operates from -40°C to 105°C compared to the original -25°C to 105°C range. The extended lower temperature capability provides additional operational flexibility in applications exposed to lower ambient or storage temperatures.