SLP332M080H3P3 Equivalent & Substitute Parts

Part Overview

The SLP332M080H3P3 is a 3300 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 3000 hours at 105°C.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained across critical parameters including capacitance, voltage rating, tolerance, operating temperature range, and package configuration. Substitution becomes necessary due to inventory availability, supply chain considerations, or design optimization requirements.

Substiute Parts

SLP332M080H3P3

Cornell Dubilier Electronics (CDE)In Stock: 1158SLP332M080H3P3 Datasheet

Current PartRFQ

381LX332M080J052

Cornell Dubilier Electronics (CDE)In Stock: 4506381LX332M080J052 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SLP332M080H3P3 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 3300 µF (exact match)
• Voltage rating: 80 V (exact match)
• Tolerance: ±20% (exact match)
• Operating temperature range: -40°C to 105°C (exact match)
• Lifetime specification: 3000 Hrs @ 105°C (exact match)
• Polarization: Polar (exact match)

Mechanical Compatibility Requirements:

• Package type: Radial, Can - Snap-In (exact match)
• Mounting type: Through Hole (exact match)
• Lead spacing: 0.394" (10.00mm) (exact match)

Compliance Requirements:

• RoHS3 Compliant status
• REACH Unaffected status
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute part 381LX332M080J052 meets all electrical and mechanical equivalence criteria, confirming direct substitution capability.

Parameter Comparison

Engineering Selection Recommendations

The 381LX332M080J052 is a direct electrical and mechanical equivalent to the SLP332M080H3P3. Both components are manufactured by Cornell Dubilier Electronics and maintain identical capacitance, voltage rating, tolerance, operating temperature range, and lifetime specifications. Both parts are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

The primary distinction between these parts lies in physical dimensions. The SLP332M080H3P3 features a diameter of 1.378" (35.00mm) with a seated height of 1.181" (30.00mm), while the 381LX332M080J052 has a diameter of 0.984" (25.00mm) with a seated height of 2.047" (52.00mm). Both maintain the same 0.394" (10.00mm) lead spacing and snap-in mounting configuration.

Selection between these parts depends on available board space and mechanical constraints. The SLP332M080H3P3 occupies greater radial space but less vertical height, while the 381LX332M080J052 requires less radial space but greater vertical clearance. Both parts are Active status products with confirmed inventory availability.

Frequently Asked Questions (FAQ)

Q: Can the 381LX332M080J052 be used as a direct replacement for the SLP332M080H3P3?

A: Yes. Both parts share identical electrical specifications: 3300 µF capacitance, 80 V voltage rating, ±20% tolerance, -40°C to 105°C operating range, and 3000 hours lifetime at 105°C. Both use identical lead spacing (10.00mm) and snap-in mounting configuration. Substitution is electrically and mechanically valid.

Q: What are the physical differences between these parts?

A: The SLP332M080H3P3 has a can diameter of 35.00mm and height of 30.00mm. The 381LX332M080J052 has a can diameter of 25.00mm and height of 52.00mm. Lead spacing remains identical at 10.00mm for both parts.

Q: Are there any compliance or regulatory differences?

A: No. Both parts are ROHS3 Compliant, REACH Unaffected, and carry Moisture Sensitivity Level 1 (Unlimited). Both are classified under ECCN EAR99 and HTSUS 8532.22.0040.

Q: Which part should be selected for space-constrained applications?

A: Selection depends on available space orientation. The 381LX332M080J052 is preferred when radial space is limited. The SLP332M080H3P3 is preferred when vertical clearance is limited.

Q: Are both parts currently available?

A: Yes. The SLP332M080H3P3 has 1048 pieces in stock. The 381LX332M080J052 has 4459 pieces in stock. Both are Active status products.