SLP222M080A7P3 Equivalent & Substitute Parts

Part Overview

The SLP222M080A7P3 is a 2200 µF, 80 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general-purpose applications requiring high capacitance values at moderate voltage ratings. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 3000 hours at 105°C. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility parameters are maintained across the product line, ensuring functional interchangeability in circuit applications.

Substiute Parts

SLP222M080A7P3

Cornell Dubilier Electronics (CDE)In Stock: 671SLP222M080A7P3 Datasheet

Current PartRFQ

381LX222M080A012

Cornell Dubilier Electronics (CDE)In Stock: 1919381LX222M080A012 Datasheet

SimilarRFQ

381LX222M080H452

Cornell Dubilier Electronics (CDE)In Stock: 3419381LX222M080H452 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SLP222M080A7P3 are identified based on strict electrical and mechanical parameter equivalence. The following criteria determine substitution eligibility:

Electrical Equivalence Parameters:

• Capacitance: 2200 µF (exact match required)
• Voltage Rating: 80 V (exact match required)
• Tolerance: ±20% (exact match required)
• Lifetime: 3000 Hrs @ 105°C (exact match required)
• Operating Temperature Range: -40°C ~ 105°C (exact match required)
• Polarization: Polar (exact match required)

Mechanical Compatibility Parameters:

• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial, Can - Snap-In (exact match required)
• Lead Spacing: 0.394" (10.00mm) (exact match required)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The substitute parts 381LX222M080A012 and 381LX222M080H452 meet all electrical and mechanical equivalence criteria. Physical dimensions (diameter and height) may vary within the snap-in package envelope while maintaining identical lead spacing and mounting compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SLP222M080A7P3, 381LX222M080A012, and 381LX222M080H452—maintain Active product status and full ROHS3 compliance. Selection between these parts is determined by physical space constraints within the application.

SLP222M080A7P3 presents a compact diameter of 0.866" (22.00mm) with a seated height of 1.575" (40.00mm), suitable for applications with limited radial space but moderate axial clearance.

381LX222M080A012 offers the smallest axial footprint at 1.063" (27.00mm) seated height but requires the largest radial space at 1.378" (35.00mm) diameter. This configuration is appropriate for applications prioritizing vertical space efficiency.

381LX222M080H452 maintains the same compact diameter as the SLP222M080A7P3 at 0.866" (22.00mm) but requires the greatest axial clearance at 1.850" (47.00mm) seated height. This part is suitable for applications with ample vertical space and restricted radial dimensions.

All substitute parts deliver equivalent electrical performance with identical capacitance, voltage rating, tolerance, lifetime rating, and operating temperature specifications. Lead spacing remains constant at 0.394" (10.00mm) across all variants, ensuring PCB footprint compatibility for snap-in mounting.

Frequently Asked Questions (FAQ)

Q: Can the 381LX222M080A012 be used as a direct replacement for the SLP222M080A7P3?

A: The 381LX222M080A012 is electrically equivalent and mechanically compatible for snap-in mounting. However, the physical dimensions differ significantly. The 381LX222M080A012 has a larger diameter (1.378" vs. 0.866") and smaller height (1.063" vs. 1.575"). Substitution is valid only if the application PCB layout accommodates the larger radial dimension and reduced axial height.

Q: What is the primary difference between the 381LX222M080H452 and the SLP222M080A7P3?

A: Both parts share identical diameter (0.866") and lead spacing (0.394"), but the 381LX222M080H452 has a greater seated height of 1.850" compared to 1.575" for the SLP222M080A7P3. All electrical parameters remain equivalent. Substitution requires verification of available vertical clearance in the application.

Q: Are there differences in ripple current handling between these parts?

A: The SLP222M080A7P3 specifies ripple current of 2.03 A @ 120 Hz and 2.54 A @ 20 kHz. Both substitute parts specify 2.1 A @ 120 Hz and 2.4 A @ 20 kHz. These variations fall within acceptable operating parameters for general-purpose applications. Circuit design should account for the specified ripple current ratings of the selected part.

Q: Do all three parts meet the same compliance standards?

A: Yes. All three parts are ROHS3 Compliant, carry Moisture Sensitivity Level 1 (Unlimited), and maintain REACH Unaffected status. Compliance certifications are identical across all variants.

Q: What determines which substitute part to select?

A: Selection is based exclusively on physical space availability within the application. The SLP222M080A7P3 and 381LX222M080H452 are preferred when radial space is constrained (0.866" diameter). The 381LX222M080A012 is selected when vertical space is the limiting factor (1.063" height). All three deliver identical electrical performance and are mechanically compatible with snap-in mounting systems using 0.394" (10.00mm) lead spacing.