SLP153M016E1P3 Equivalent & Substitute Parts

Part Overview

The SLP153M016E1P3 is a 15000 µF, 16 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general purpose applications requiring high capacitance energy storage in compact form factors. The part operates across a temperature range of -40°C to 105°C with a rated lifetime of 3000 hours at 105°C. Equivalent and substitute parts are identified to provide design flexibility, inventory alternatives, and continuity of supply for applications where the primary part number may be unavailable or where mechanical constraints require dimensional variations.

Substiute Parts

SLP153M016E1P3

Cornell Dubilier Electronics (CDE)In Stock: 831SLP153M016E1P3 Datasheet

Current PartRFQ

381LX153M016J032

Cornell Dubilier Electronics (CDE)In Stock: 882381LX153M016J032 Datasheet

SimilarRFQ

381LX153M016K022

Cornell Dubilier Electronics (CDE)In Stock: 1961381LX153M016K022 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SLP153M016E1P3 are qualified based on strict electrical and mechanical parameter matching. All substitute candidates must satisfy the following criteria:

Electrical Parameters (Non-Negotiable):

• Capacitance: 15000 µF (exact match)
• Voltage Rating: 16 V (exact match)
• Tolerance: ±20% (exact match)
• Operating Temperature Range: -40°C to 105°C (exact match or better)
• Lifetime: 3000 Hrs @ 105°C (exact match or better)
• Polarization: Polar (exact match)

Mechanical Parameters (Non-Negotiable):

• Package Type: Radial, Can - Snap-In (exact match)
• Mounting Type: Through Hole (exact match)
• Lead Spacing: 10.00 mm (exact match)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (exact match)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match)
• REACH Status: REACH Unaffected (exact match)

The two substitute parts identified—381LX153M016J032 and 381LX153M016K022—meet all electrical and compliance requirements. Physical dimensions (diameter and height) may vary within the snap-in package envelope, provided lead spacing and mounting footprint remain constant.

Parameter Comparison

Engineering Selection Recommendations

All three parts—SLP153M016E1P3, 381LX153M016J032, and 381LX153M016K022—are Active product status from Cornell Dubilier Electronics and carry identical electrical specifications (15000 µF, 16 V, ±20%, 3000 Hrs @ 105°C). All parts are ROHS3 Compliant, REACH Unaffected, and classified as MSL 1 (Unlimited moisture sensitivity).

Selection Criteria Based on Physical Constraints:

The primary differentiation between these parts is physical dimension. The SLP153M016E1P3 and 381LX153M016K022 share identical diameter (30.00 mm) but differ in height (25.00 mm vs. 32.00 mm respectively). The 381LX153M016J032 has a smaller diameter (25.00 mm) but greater height (37.00 mm).

Selection should be based on available PCB or chassis space. If the original design accommodates a 30 mm diameter with 25 mm height clearance, the SLP153M016E1P3 is the primary choice. If height is constrained but diameter tolerance exists, the 381LX153M016J032 (25 mm diameter, 37 mm height) provides an alternative. The 381LX153M016K022 (30 mm diameter, 32 mm height) serves as an intermediate option when the original part is unavailable but space permits modest height increase.

All three parts maintain identical lead spacing (10.00 mm), ensuring PCB footprint compatibility for through-hole mounting.

Frequently Asked Questions (FAQ)

Q1: Can 381LX153M016J032 be used as a direct replacement for SLP153M016E1P3?

A: Electrically, yes. Both parts have identical capacitance (15000 µF), voltage rating (16 V), tolerance (±20%), operating temperature range (-40°C to 105°C), and lifetime (3000 Hrs @ 105°C). However, the 381LX153M016J032 has different physical dimensions: 25.00 mm diameter and 37.00 mm height versus 30.00 mm diameter and 25.00 mm height for the SLP153M016E1P3. Mechanical fit must be verified before substitution.

Q2: What is the difference between 381LX153M016J032 and 381LX153M016K022?

A: Both parts are electrically identical (15000 µF, 16 V, ±20%, 3000 Hrs @ 105°C). The difference is physical: 381LX153M016J032 is 25.00 mm diameter × 37.00 mm height, while 381LX153M016K022 is 30.00 mm diameter × 32.00 mm height. Lead spacing is identical (10.00 mm) for both.

Q3: Are all three parts RoHS compliant?

A: Yes. SLP153M016E1P3, 381LX153M016J032, and 381LX153M016K022 are all ROHS3 Compliant and REACH Unaffected.

Q4: Do these parts have the same ripple current ratings?

A: The SLP153M016E1P3 specifies ripple current values (3.11 A @ 120 Hz, 3.89 A @ 20 kHz). The substitute parts 381LX153M016J032 and 381LX153M016K022 specify 3.2 A @ 120 Hz and 3.7 A @ 20 kHz respectively. These values are comparable and within acceptable operating margins for general purpose applications.

Q5: Can these parts be used interchangeably on the same PCB?

A: Lead spacing is identical (10.00 mm) for all three parts, ensuring PCB footprint compatibility. However, physical dimensions differ. Verify available space for diameter and height before substitution. The snap-in package design accommodates dimensional variation within the component envelope.

Q6: What is the moisture sensitivity level for these parts?

A: All three parts are classified as MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q7: Are these parts suitable for high-frequency applications?

A: These are general purpose aluminum electrolytic capacitors rated for ripple current at both low frequency (120 Hz) and high frequency (20 kHz). Specific application suitability depends on circuit requirements and ESR tolerance. The SLP153M016E1P3 specifies ESR of 44 mOhm @ 120 Hz; substitute parts do not specify ESR values in the provided data.