SLP152M180H7P3 Equivalent & Substitute Parts

Part Overview

The SLP152M180H7P3 is a 1500 µF, 180 V aluminum electrolytic capacitor manufactured by Cornell Dubilier Electronics (CDE) in a radial, can snap-in package. This component is classified as Active product status and is designed for general purpose applications requiring high capacitance values in compact form factors. The part operates across a temperature range of -25°C to 105°C with a rated lifetime of 3000 hours at 105°C.

Substitute parts are identified when equivalent electrical and mechanical parameters allow direct replacement in circuit applications, ensuring functional continuity while accommodating design flexibility, inventory availability, or voltage margin requirements.

Substiute Parts

SLP152M180H7P3

Cornell Dubilier Electronics (CDE)In Stock: 1135SLP152M180H7P3 Datasheet

Current PartRFQ

SLP152M200H7P3

Cornell Dubilier Electronics (CDE)In Stock: 4013SLP152M200H7P3 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLP152M180H7P3 is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 1500 µF (exact match)
• Tolerance: ±20% (exact match)
• ESR: 133 mOhm (exact match)
• Lifetime: 3000 Hrs @ 105°C (exact match)
• Operating temperature range: -25°C to 105°C (exact match)

Mechanical Equivalence Requirements:

• Lead spacing: 0.394" (10.00 mm) (exact match)
• Size / Dimension: 1.378" Dia (35.00 mm) (exact match)
• Height - Seated (Max): 1.575" (40.00 mm) (exact match)
• Mounting type: Through Hole (exact match)
• Package / Case: Radial, Can - Snap-In (exact match)

Compliance Equivalence Requirements:

• RoHS Status: ROHS3 Compliant (exact match)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match)
• REACH Status: REACH Unaffected (exact match)

The substitute part SLP152M200H7P3 maintains all electrical, mechanical, and compliance parameters identical to the main part with the exception of rated voltage, which is increased from 180 V to 200 V. This voltage elevation provides additional design margin while preserving all other functional characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the SLP152M180H7P3 and SLP152M200H7P3 maintain Active product status with full ROHS3 compliance and REACH unaffected certification. Selection between these parts is determined by circuit voltage requirements:

SLP152M180H7P3 Selection Criteria:

• Circuit design specifies 180 V rated voltage
• Inventory availability: 1037 pieces in stock
• Cost optimization for exact voltage specification

SLP152M200H7P3 Selection Criteria:

• Circuit design operates at or below 180 V with voltage margin requirements
• Higher voltage rating (200 V) provides additional safety margin
• Inventory availability: 3950 pieces in stock
• Identical electrical performance and physical footprint
• Same series classification (SLP0712TE 750W)

Both parts are suitable for general purpose applications and maintain identical mechanical compatibility with through-hole snap-in mounting configurations. The 20 V voltage differential between rated specifications does not alter capacitance, ESR, temperature performance, or physical dimensions.

Frequently Asked Questions (FAQ)

Q: Can SLP152M200H7P3 directly replace SLP152M180H7P3 in existing designs?

A: Yes. The SLP152M200H7P3 maintains identical capacitance (1500 µF), tolerance (±20%), ESR (133 mOhm), lifetime (3000 Hrs @ 105°C), operating temperature range (-25°C to 105°C), and physical dimensions (1.378" Dia × 1.575" height, 0.394" lead spacing). The increased voltage rating (200 V vs. 180 V) does not affect compatibility in circuits operating at or below 180 V.

Q: What is the difference between these two parts?

A: The sole difference is the rated voltage specification. SLP152M180H7P3 is rated at 180 V, while SLP152M200H7P3 is rated at 200 V. All other electrical parameters, mechanical dimensions, and compliance certifications are identical.

Q: Are both parts in the same product series?

A: Yes. Both SLP152M180H7P3 and SLP152M200H7P3 belong to the SLP0712TE series (750W) manufactured by Cornell Dubilier Electronics.

Q: What mounting configuration do these capacitors use?

A: Both parts use through-hole radial, can snap-in mounting. Lead spacing is 0.394" (10.00 mm), and the can diameter is 1.378" (35.00 mm) with a maximum seated height of 1.575" (40.00 mm).

Q: Are these parts RoHS and REACH compliant?

A: Yes. Both SLP152M180H7P3 and SLP152M200H7P3 are ROHS3 compliant and REACH unaffected. Moisture sensitivity level is 1 (Unlimited).

Q: What is the ESR specification for these capacitors?

A: Both parts have an equivalent series resistance (ESR) of 133 mOhm, ensuring consistent performance in high-frequency filtering and energy storage applications.

Q: What is the lifetime rating for these capacitors?

A: Both parts are rated for 3000 hours at 105°C operating temperature, with an operating temperature range of -25°C to 105°C.