SLMD600H10L Monocrystalline Solar Cell Equivalent & Substitute Parts

Part Overview

The SLMD600H10L is a monocrystalline solar cell manufactured by ANYSOLAR Ltd, part of the IXOLAR™ series. This component delivers 111 mW at 6.3 V open circuit voltage and is designed for low-power photovoltaic applications. The part is currently listed as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Substiute Parts

SLMD600H10L

ANYSOLAR LtdIn Stock: 936SLMD600H10L Datasheet

Current PartRFQ

SM560K10L

ANYSOLAR LtdIn Stock: 1078SM560K10L Datasheet

DirectRFQ

SM700K10L

ANYSOLAR LtdIn Stock: 1974SM700K10L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SLMD600H10L is determined by the following electrical and mechanical parameters:

• Cell Type: Monocrystalline construction
• Manufacturer: ANYSOLAR Ltd (same manufacturer ensures design consistency)
• Series Compatibility: IXOLAR™ series
• Voltage Range: Open circuit voltage between 6.3 V and 6.91 V
• Power Output: Minimum 111 mW (equal to or greater than original specification)
• Physical Dimensions: Compatible cell dimensions within the 22–24mm length and 35–36mm width range
• Electrical Characteristics: Current and voltage parameters suitable for equivalent circuit integration

Two substitute parts meet these criteria: SM560K10L (direct substitute with comparable power output) and SM700K10L (higher power alternative with enhanced performance specifications).

Parameter Comparison

Engineering Selection Recommendations

SM560K10L serves as the direct functional equivalent to the SLMD600H10L. Both cells share identical physical dimensions (22.0mm x 35.0mm x 2.0mm) and deliver comparable power output (123 mW versus 111 mW). The SM560K10L is currently in active production status with ROHS3 compliance certification, providing supply chain continuity and regulatory alignment. The open circuit voltage increases from 6.3 V to 6.91 V, with corresponding adjustments in maximum power point parameters. This substitute is suitable for applications requiring direct form-factor compatibility.

SM700K10L represents a higher-performance alternative with 154.3 mW output and identical open circuit voltage (6.91 V) to the SM560K10L. Physical dimensions increase slightly (24.00mm x 36.00mm x 1.80mm), requiring mechanical integration verification. The SM700K10L delivers 39% greater power output and is ROHS3 compliant with active production status. This option is applicable where increased power generation capacity is acceptable within system constraints.

Both substitute parts carry EAR99 export classification and are manufactured by ANYSOLAR Ltd within the IXOLAR™ series, ensuring design consistency and supply reliability.

Frequently Asked Questions (FAQ)

Q: Can SM560K10L directly replace SLMD600H10L without circuit modifications?

A: SM560K10L shares identical physical dimensions and is mechanically interchangeable. Electrical parameters differ slightly: open circuit voltage increases from 6.3 V to 6.91 V, and maximum power point voltage increases from 5.01 V to 5.58 V. Circuit design must accommodate these voltage variations.

Q: What is the primary difference between SM560K10L and SM700K10L?

A: SM560K10L delivers 123 mW with dimensions 22.0mm x 35.0mm x 2.0mm. SM700K10L delivers 154.3 mW with dimensions 24.00mm x 36.00mm x 1.80mm. Both share 6.91 V open circuit voltage. Selection depends on available mechanical space and required power output.

Q: Are both substitute parts compliant with current regulatory standards?

A: Both SM560K10L and SM700K10L carry ROHS3 compliance certification. The original SLMD600H10L compliance status is not specified in available documentation. Both substitutes are currently in active production.

Q: What is the impact of voltage differences on system design?

A: The SLMD600H10L operates at 6.3 V open circuit and 5.01 V maximum power point. Substitutes operate at 6.91 V open circuit and 5.58 V maximum power point. Voltage regulation circuits and load matching must be evaluated for compatibility with these higher voltage levels.

Q: Are there packaging differences between these parts?

A: SLMD600H10L is packaged as Cell (10). SM560K10L is supplied in Bulk packaging. SM700K10L is supplied in Tray packaging. Packaging format does not affect electrical or mechanical compatibility; it reflects current distribution methods.