SLMD481H12 Monocrystalline Solar Cell Equivalent & Substitute Parts

Part Overview

The SLMD481H12 is a monocrystalline solar cell from ANYSOLAR Ltd's IXOLAR™ series, rated at 1.08 W maximum power output with an open circuit voltage of 7.56 V. This component is classified as obsolete, making identification of functionally equivalent substitute parts essential for ongoing system maintenance, repair, and new design implementations where this cell type is specified.

Substiute Parts

SLMD481H12

ANYSOLAR LtdIn Stock: 971SLMD481H12 Datasheet

Current PartRFQ

SLMD481H12L

ANYSOLAR LtdIn Stock: 2632SLMD481H12L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLMD481H12 is determined by electrical and mechanical parameter alignment within the monocrystalline solar cell category. The critical parameters governing substitution are:

• Maximum power output (1.08 W)
• Open circuit voltage (7.56 V)
• Voltage at maximum power point (6.06 V)
• Current at maximum power point (178 mA)
• Short circuit current (200 mA)
• Cell type (Monocrystalline)
• Physical dimensions (90.00mm x 79.00mm x 2.00mm)
• Package classification (Cell 24)

The direct substitute SLMD481H12L maintains identical electrical specifications and physical dimensions, differing only in packaging configuration (Bulk versus standard packaging). This part is sourced from the same manufacturer and series, ensuring compatibility in applications requiring the SLMD481H12.

Parameter Comparison

Engineering Selection Recommendations

The SLMD481H12L serves as the direct functional equivalent to the SLMD481H12. Both components are classified as obsolete products from ANYSOLAR Ltd's IXOLAR™ series. Selection between these parts should be based on packaging requirements and inventory availability. The SLMD481H12L is available in bulk packaging with higher inventory levels (2597 pcs) compared to the standard packaging variant (910 pcs).

Both parts maintain identical electrical performance characteristics and physical dimensions, ensuring mechanical and electrical compatibility in applications originally designed for the SLMD481H12. Compliance certifications (REACH Unaffected, ECCN EAR99) are consistent across both variants.

Frequently Asked Questions (FAQ)

Q: Can SLMD481H12L be used as a direct replacement for SLMD481H12?

A: Yes. The SLMD481H12L is electrically and mechanically identical to the SLMD481H12. The difference is limited to packaging configuration (Bulk versus standard packaging). Both parts deliver the same 1.08 W power output, 7.56 V open circuit voltage, and maintain identical physical dimensions.

Q: What is the significance of the "L" designation in SLMD481H12L?

A: The "L" suffix indicates bulk packaging configuration. The electrical specifications and cell performance remain unchanged from the base SLMD481H12 model.

Q: Are there any compliance or regulatory differences between these parts?

A: No. Both SLMD481H12 and SLMD481H12L carry identical REACH and ECCN classifications (REACH Unaffected, EAR99), with matching HTSUS codes (8541.42.0080).

Q: Why is the SLMD481H12 classified as obsolete?

A: Obsolete status indicates the part is no longer in active production by the manufacturer. The SLMD481H12L, also obsolete, represents the available inventory option for this cell specification.

Q: What packaging considerations should be evaluated when selecting between these parts?

A: The SLMD481H12 uses standard packaging, while SLMD481H12L uses bulk packaging. Selection depends on application requirements, handling procedures, and inventory management protocols. Both maintain identical moisture sensitivity levels (MSL 1 - Unlimited).