SLMD481H10 Monocrystalline Solar Cell Equivalent & Substitute Parts

Part Overview

The SLMD481H10 is a monocrystalline solar cell from ANYSOLAR Ltd's IXOLAR™ series, rated at 892 mW maximum power output with a 6.3 V open circuit voltage. This component is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system maintenance and component procurement.

Substiute Parts

SLMD481H10

ANYSOLAR LtdIn Stock: 830SLMD481H10 Datasheet

Current PartRFQ

SLMD481H10L

ANYSOLAR LtdIn Stock: 1273SLMD481H10L Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLMD481H10 is determined by strict equivalence across electrical performance parameters and physical dimensions. The following criteria establish valid substitution:

• Maximum power output: 892 mW
• Voltage at maximum power point: 5 V
• Current at maximum power point: 178 mA
• Open circuit voltage: 6.3 V
• Short circuit current: 200 mA
• Cell type: Monocrystalline
• Physical dimensions: 89.00 mm × 67.00 mm × 2.00 mm
• Package classification: Cell (20)
• Moisture sensitivity level: 1 (Unlimited)

The direct substitute SLMD481H10L maintains identical electrical and mechanical specifications while differing only in packaging format (Bulk versus standard packaging).

Parameter Comparison

Engineering Selection Recommendations

The SLMD481H10L serves as the direct functional equivalent to the SLMD481H10. Both components are classified as obsolete products within the IXOLAR™ series and maintain identical electrical performance characteristics and physical dimensions. Selection between these parts is determined by packaging requirements and inventory availability rather than technical performance differences.

Both parts carry REACH Unaffected status and are subject to ECCN EAR99 classification, ensuring consistent regulatory compliance across substitution scenarios.

Frequently Asked Questions (FAQ)

Q: Can SLMD481H10L be used as a direct replacement for SLMD481H10?

A: Yes. The SLMD481H10L is electrically and mechanically identical to the SLMD481H10. The primary difference is packaging format (Bulk versus standard). Both deliver 892 mW at 5 V with identical current and voltage characteristics.

Q: What determines whether a part can substitute for the SLMD481H10?

A: Substitution requires matching all electrical parameters (power output, voltage at Pmpp, current at Pmpp, open circuit voltage, short circuit current), cell type (monocrystalline), physical dimensions (89.00 mm × 67.00 mm × 2.00 mm), and package classification (Cell 20).

Q: Are there differences in moisture sensitivity between the main part and substitute?

A: No. Both the SLMD481H10 and SLMD481H10L carry MSL rating 1 (Unlimited), indicating identical moisture handling requirements.

Q: Does packaging format affect electrical performance?

A: No. Packaging format (Bulk versus standard) affects only procurement and handling logistics, not electrical or mechanical performance.

Q: What is the significance of the obsolete product status?

A: Obsolete status indicates these components are no longer in active production. Substitution planning should account for limited inventory availability and the need to identify long-term alternatives if continued supply becomes unavailable.