SLM-630 Equivalent & Substitute Parts

Part Overview

The SLM-630 is an LED standoff manufactured by Bivar Inc., designed for T1 and T1 3/4 LED applications. This component features a vertical mounting configuration with a 0.630" (16.00mm) length and is constructed from black nylon material. The part maintains Active product status and is RoHS3 compliant.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category. Alternatives to the SLM-630 are necessary when inventory constraints occur, when specific material properties are required, or when alternative manufacturers' components meet the same functional specifications.

Substiute Parts

SLM-630

Bivar Inc.In Stock: 1167SLM-630 Datasheet

Current PartRFQ

LTM-620

Bivar Inc.In Stock: 5376LTM-620 Datasheet

Parametric EquivalentRFQ

705820155

Würth ElektronikIn Stock: 2409705820155 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the SLM-630 is determined by the following criteria:

Primary Compatibility Parameters:

• LED Type: T1 or T1 3/4 compatibility required
• Mounting Configuration: Vertical orientation (SR VERT)
• Color: Black
• RoHS3 Compliance: Required
• Moisture Sensitivity Level: MSL 1 or equivalent

Secondary Consideration Parameters:

• Length tolerance: Acceptable range 0.610" to 0.630" (15.50mm to 16.00mm)
• Material: Nylon or equivalent crystalline polymer acceptable

The identified substitute parts maintain compatibility across all primary parameters. Length variations within the specified range do not compromise functional performance in standard LED mounting applications.

Parameter Comparison

Engineering Selection Recommendations

SLM-630 (Primary Selection) Select the SLM-630 when nylon material specification is required and standard length of 0.630" (16.00mm) is specified in the design. This part is manufactured by Bivar Inc. and maintains Active product status with full RoHS3 compliance and MSL 1 rating.

LTM-620 (Alternative - Bivar Inc.) The LTM-620 is suitable as a substitute when a 0.010" (0.25mm) length reduction is acceptable. This part uses crystalline polymer material instead of nylon, maintains identical LED type compatibility, and is Active with RoHS3 compliance and MSL 1 rating. Inventory availability is higher for this part (5359 pcs vs. 1088 pcs).

705820155 (Alternative - Würth Elektronik) The 705820155 is suitable as a substitute when a 0.020" (0.50mm) length reduction is acceptable. This part maintains nylon material construction, Active product status, and RoHS3 compliance. MSL rating is not applicable for this component. Inventory availability is 2358 pcs.

All three parts are RoHS3 compliant and support T1/T1 3/4 LED applications in vertical mounting configurations.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the SLM-630? A: Substitute parts must support T1 and T1 3/4 LED types, feature vertical mounting configuration, be black in color, and maintain RoHS3 compliance. Length variations between 0.610" and 0.630" (15.50mm to 16.00mm) are acceptable within the same functional category.

Q: Are there material differences between the substitute parts? A: Yes. The SLM-630 and 705820155 use nylon material, while the LTM-620 uses crystalline polymer. Both materials are acceptable for this product category and do not affect LED mounting compatibility.

Q: What is the significance of the length differences? A: The length variations (0.630", 0.620", and 0.610") represent minor dimensional differences that do not compromise functional performance in standard LED standoff applications. Selection should be based on specific design requirements and available inventory.

Q: How do the moisture sensitivity levels compare? A: The SLM-630 and LTM-620 both carry MSL 1 (Unlimited) ratings, indicating no moisture sensitivity restrictions. The 705820155 has MSL Not Applicable, which does not indicate a limitation but rather that this parameter is not specified for this component.

Q: Can these parts be used interchangeably in production? A: Parts with matching LED type, mounting configuration, color, and RoHS compliance can be used interchangeably provided that design specifications permit the minor length variations. Verification against specific design documentation is required.

Q: What is the inventory status for each part? A: SLM-630 has 1088 pcs in stock, LTM-620 has 5359 pcs in stock, and 705820155 has 2358 pcs in stock. All parts are listed as New Original In Stock.