SLM-360 LED Standoff Equivalent & Substitute Parts

Part Overview

The SLM-360 is a T1/T1 3/4 LED standoff manufactured by Bivar Inc., designed for vertical mounting applications. This component is constructed from black nylon material and features a 0.360" (9.14mm) length specification. The part maintains Active product status and is RoHS3 compliant, making it suitable for current electronic assembly requirements. Equivalent substitute parts are identified based on matching electrical and mechanical parameters, including LED form factor, material composition, color specification, and dimensional tolerances within acceptable ranges.

Substiute Parts

SLM-360

Bivar Inc.In Stock: 1060SLM-360 Datasheet

Current PartRFQ

705820090

Würth ElektronikIn Stock: 4332705820090 Datasheet

Parametric EquivalentRFQ

705820095

Würth ElektronikIn Stock: 1660705820095 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SLM-360 are qualified based on the following critical parameters:

Matching Criteria:

• LED form factor: T1 and T1 3/4 compatibility
• Material composition: Nylon construction
• Color specification: Black
• Mounting orientation: Vertical standoff configuration
• Regulatory compliance: RoHS3 compliance status

Dimensional Tolerance Basis: Substitute parts are grouped within acceptable length variations. The SLM-360 specifies 0.360" (9.14mm). Würth Elektronik equivalents are provided at 0.354" (9.00mm) and 0.374" (9.50mm), representing dimensional variations of ±0.014" from the nominal specification. These variations remain within standard mechanical tolerances for LED standoff applications where precise height matching is not a critical design constraint.

Regulatory Alignment: All substitute parts maintain RoHS3 compliance and EAR99 export classification, ensuring compatibility with current regulatory requirements and supply chain restrictions.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection Criteria:

The SLM-360 remains the preferred component when Bivar Inc. sourcing is specified or when the exact 0.360" (9.14mm) length is a design requirement. All three parts maintain Active product status, ensuring continued availability and manufacturing support.

Substitute Selection Logic:

Part 705820090 (Würth Elektronik) operates at 0.354" (9.14mm), representing a 0.006" reduction in length. This substitute is appropriate for applications where a slightly shorter standoff height is acceptable within circuit board layout constraints.

Part 705820095 (Würth Elektronik) operates at 0.374" (9.50mm), representing a 0.014" increase in length. This substitute is appropriate for applications where a slightly taller standoff height accommodates design requirements.

Compliance Assurance:

All three parts satisfy RoHS3 compliance requirements and maintain EAR99 export classification. Würth Elektronik substitutes carry REACH Unaffected status, providing additional regulatory documentation for supply chain compliance verification.

Frequently Asked Questions (FAQ)

Q: Can 705820090 and 705820095 be used interchangeably with SLM-360?

A: Interchangeability depends on dimensional tolerance requirements in your specific application. Both Würth Elektronik parts match the LED form factor (T1/T1 3/4), material (Nylon), and color (Black) specifications. The length variation of ±0.014" from the nominal 0.360" specification must be evaluated against your circuit board layout and component clearance requirements.

Q: What is the significance of the length differences between these parts?

A: The SLM-360 specifies 0.360" (9.14mm), while 705820090 measures 0.354" (9.00mm) and 705820095 measures 0.374" (9.50mm). These variations affect the vertical standoff height of the LED component. Selection depends on whether your PCB design accommodates the shorter or taller configuration, or requires the nominal dimension.

Q: Are all three parts RoHS3 compliant?

A: Yes. The SLM-360, 705820090, and 705820095 all carry RoHS3 Compliant certification, meeting current environmental and hazardous substance restrictions for electronic components.

Q: What packaging format is used for these parts?

A: All three parts are supplied in Bag packaging, consistent with standard LED standoff component distribution methods.

Q: Do the Würth Elektronik substitutes have different material specifications than the Bivar part?

A: The Würth Elektronik parts specify Nylon 66 material with UL94 V-2 flame rating, while the SLM-360 specifies Nylon. Both material compositions are functionally equivalent for LED standoff applications. The Nylon 66 specification provides documented flame-resistance certification.

Q: What is the inventory status for these parts?

A: SLM-360 has 1013 pieces in stock. 705820090 has 4259 pieces in stock. 705820095 has 1578 pieces in stock. Inventory levels should be verified at time of procurement.