SLM-230 Equivalent & Substitute Parts

Part Overview

The SLM-230 is an LED standoff manufactured by Bivar Inc., designed for T1 and T1 3/4 LED applications. This vertical mount component features a black nylon construction with a 0.230" (5.84mm) length and is classified as an active product with ROHS3 compliance. LED standoffs are mechanical support components that position and isolate light-emitting diodes in circuit assemblies, making equivalent substitutes necessary when primary inventory is unavailable or when design specifications require alternative sourcing options.

Substiute Parts

SLM-230

Bivar Inc.In Stock: 867SLM-230 Datasheet

Current PartRFQ

705820060

Würth ElektronikIn Stock: 39921705820060 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLM-230 is determined by strict alignment of the following parameters:

Critical Matching Parameters:

• LED Type: T1, T1 3/4 compatibility
• Material: Nylon construction
• Color: Black
• Product Status: Active
• RoHS Compliance: ROHS3 Compliant

Allowable Variance:

• Length: Tolerance of ±0.006" (0.15mm) is acceptable for mechanical standoff applications where the component functions as a spacer and support structure

The substitute part 705820060 from Würth Elektronik meets all critical parameters with a length of 0.236" (6.00mm), representing a 0.006" (0.16mm) variance from the primary part specification. This variance falls within acceptable mechanical tolerances for LED standoff applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: SLM-230 The SLM-230 remains the preferred selection when available. This part is actively manufactured by Bivar Inc. and carries full ROHS3 compliance certification with MSL 1 rating, indicating no moisture sensitivity constraints during storage and handling.

Substitute Part: 705820060 The Würth Elektronik 705820060 serves as a direct functional equivalent when SLM-230 inventory is depleted. This substitute maintains identical LED type compatibility, material composition, color specification, and regulatory compliance status. The 0.006" length variance is within acceptable mechanical tolerances for standoff applications and does not compromise electrical or mechanical performance in standard circuit board assemblies.

Both parts are active products with current manufacturing status, ensuring long-term availability and supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can the 705820060 be used as a direct replacement for the SLM-230 in production assemblies?

A: Yes. The 705820060 meets all critical functional parameters including LED type compatibility (T1, T1 3/4), material specification (nylon), color matching (black), and regulatory compliance (ROHS3). The 0.006" length difference is within acceptable mechanical tolerances for LED standoff applications.

Q: What is the significance of the length difference between these parts?

A: The SLM-230 measures 0.230" (5.84mm) while the 705820060 measures 0.236" (6.00mm). This 0.006" (0.16mm) variance represents a 2.6% dimensional difference. For LED standoff applications where the component functions as a mechanical spacer and support structure, this variance remains within standard engineering tolerances and does not affect circuit board layout or LED positioning in typical applications.

Q: Are there any compliance or certification differences between these parts?

A: Both parts carry ROHS3 compliance certification. The SLM-230 specifies MSL 1 (Unlimited moisture sensitivity level), while the 705820060 lists moisture sensitivity as Not Applicable. Both parts are suitable for standard storage and handling conditions without special environmental controls.

Q: What packaging format is used for these parts?

A: Both the SLM-230 and 705820060 are supplied in bag packaging, suitable for bulk component storage and automated assembly processes.

Q: Can these parts be intermixed in the same production run?

A: Yes. Both parts are mechanically and electrically compatible for T1 and T1 3/4 LED applications. The dimensional tolerance between them is acceptable for standard circuit board assembly processes. However, design documentation should reflect the specific part number used in each production batch for traceability and quality control purposes.