SLM-106-01-G-D Equivalent & Substitute Parts

Part Overview

The SLM-106-01-G-D is a 12-position receptacle connector manufactured by Samtec Inc., designed for board-to-board applications with 0.050" (1.27mm) pitch spacing. This connector features forked contacts, through-hole solder termination, and gold-plated mating surfaces suitable for applications requiring reliable push-pull fastening. The part maintains active product status with 613 units in current inventory. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component procurement flexibility and supply chain continuity.

Substiute Parts

SLM-106-01-G-D

Samtec Inc.In Stock: 687SLM-106-01-G-D Datasheet

Current PartRFQ

HRS-2B-12-GA

Adam TechIn Stock: 1280HRS-2B-12-GA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the SLM-106-01-G-D are identified based on strict equivalence of critical electrical and mechanical parameters. The following parameters must match or be compatible:

• Connector type: Receptacle
• Number of positions: 12
• Pitch spacing: 0.050" (1.27mm)
• Number of rows: 2
• Row spacing: 0.100" (2.54mm)
• Mounting type: Through hole
• Termination method: Solder
• Fastening type: Push-pull
• Contact finish: Gold
• Contact material: Phosphor bronze
• RoHS compliance: ROHS3 Compliant

The HRS-2B-12-GA from Adam Tech meets these substitution criteria, maintaining dimensional and electrical compatibility while offering alternative sourcing and inventory availability.

Parameter Comparison

Engineering Selection Recommendations

Both the SLM-106-01-G-D and HRS-2B-12-GA maintain active product status and ROHS3 compliance, qualifying them for equivalent component selection. The SLM-106-01-G-D provides an extended operating temperature range of -55°C to 125°C, suitable for applications requiring broader thermal performance. The HRS-2B-12-GA operates within -40°C to 105°C and offers higher current rating (1A) and voltage rating (250VAC) specifications. Selection between these parts should be based on specific application thermal requirements and electrical load conditions. Both connectors are packaged in tubes and maintain unlimited moisture sensitivity classification (MSL 1).

Frequently Asked Questions (FAQ)

Q: Can HRS-2B-12-GA replace SLM-106-01-G-D in all applications?

A: HRS-2B-12-GA is mechanically and electrically compatible for board-to-board applications requiring 12-position, 0.050" pitch receptacle connectors. Verify operating temperature requirements; SLM-106-01-G-D supports -55°C to 125°C while HRS-2B-12-GA operates -40°C to 105°C.

Q: What are the critical dimensions for substitution compatibility?

A: Pitch spacing (0.050"), row spacing (0.100"), number of positions (12), and number of rows (2) must remain constant. Insulation height and contact post length show minor variations (0.001" and 0.003" respectively) that do not affect board-level compatibility.

Q: Are both parts RoHS compliant?

A: Yes, both SLM-106-01-G-D and HRS-2B-12-GA are ROHS3 compliant and maintain MSL 1 (unlimited) moisture sensitivity classification.

Q: What is the difference in contact finish specifications?

A: SLM-106-01-G-D specifies 20.0µin (0.51µm) mating contact finish thickness with 3.00µin (0.076µm) post finish. HRS-2B-12-GA uses flash plating for both mating and post contacts, providing equivalent gold surface protection with different thickness specifications.

Q: Are packaging formats identical?

A: Both parts are supplied in tube packaging, supporting standard component handling and automated assembly processes.