Equivalent & Substitute Parts Reference: SLIN-06F2ALG

Part Overview

SLIN-06F2ALG is a Non-Isolated PoL Module DC DC Converter from Bel Power Solutions, designed for ITE (Commercial) applications. This converter delivers 0.6 ~ 3.6V output at up to 6A from a 2.4V to 5.5V input, with a maximum output power of 22W. The product is RoHS3 compliant and currently Active. The need for substitute models arises due to supply chain management, multi-source qualification, and potential inventory requirements.

Key Parameters

Manufacturer Part Number	Type	Number of Outputs	Voltage - Input (Min)	Voltage - Input (Max)	Voltage - Output 1	Current - Output (Max)	Power (Watts)	Applications	Features	Operating Temperature	Mounting Type	Package / Case	Size / Dimension	Control Features	RoHS Status	Moisture Sensitivity Level (MSL)	Product Status
SLIN-06F2ALG	Non-Isolated PoL Module	1	2.4V	5.5V	0.6 ~ 3.6V	6A	22 W	ITE (Commercial)	Remote On/Off, OCP, OTP	-40°C ~ 85°C	Surface Mount	Module	0.48" L x 0.48" W x 0.29" H (12.2mm x 12.2mm x 7.3mm)	Enable, Active Low	ROHS3 Compliant	2A (4 Weeks)	Active

Substitute Part Grouping Explanation

Substitute selection for SLIN-06F2ALG is strictly determined by the following key parameters:

Type: Non-Isolated PoL Module
Number of Outputs: 1
Input Voltage Range: 2.4V to 5.5V
Output Voltage Range/Value: 0.6 ~ 3.6V (or as specified)
Maximum Output Current: 6A
Maximum Power: 20-22W
Features: Remote On/Off, OCP, OTP (minimum matching feature set)
Mounting Type: Surface Mount
Package Dimensions: Comparable mechanical size, case type
Operating Temperature: At least -40°C to 85°C
Product Status: Active
RoHS/Compliance Status: RoHS Compliant

Substitutes listed below meet these criteria as evidenced by their provided specifications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Type	Number of Outputs	Voltage - Input (Min)	Voltage - Input (Max)	Voltage - Output 1	Current - Output (Max)	Power (Watts)	Applications	Features	Operating Temperature	Mounting Type	Package / Case	Size / Dimension	Control Features	RoHS Status	Product Status
SLIN-06F2ALG	Bel Power Solutions	Non-Isolated PoL Module	1	2.4V	5.5V	0.6 ~ 3.6V	6A	22 W	ITE (Commercial)	Remote On/Off, OCP, OTP	-40°C ~ 85°C	Surface Mount	Module	0.48" L x 0.48" W x 0.29" H	Enable, Active Low	ROHS3 Compliant	Active
APXH006A0X-SRZ	OmniOn Power	Non-Isolated PoL Module	1	2.4V	5.5V	0.6 ~ 3.6V	6A	21 W	ITE (Commercial)	Remote On/Off, OCP, OTP, UVLO	-40°C ~ 85°C	Surface Mount	10-SMD Module	0.48" L x 0.48" W x 0.29" H	Enable, Active Low	RoHS Compliant	Active
OKL-T/6-W5N-C	Murata Power Solutions Inc.	Non-Isolated PoL Module	1	2.4V	5.5V	0.6 ~ 3.3V	6A	20 W	ITE (Commercial)	Remote On/Off, OCP, OTP, SCP, UVLO	-40°C ~ 85°C	Surface Mount	12-BLGA Module	0.48" L x 0.48" W x 0.28" H	Enable, Active Low	ROHS3 Compliant	Active

Engineering Selection Recommendations

All substitute parts listed—APXH006A0X-SRZ and OKL-T/6-W5N-C—have an Active product status and match RoHS compliance requirements. These substitutes offer compatible mechanical package sizes and are suitable for surface mount assembly. Compliance statuses are explicitly provided for qualification purposes.

Frequently Asked Questions (FAQ)

Q1: What key parameters determine if a substitute is suitable for SLIN-06F2ALG?
A1: Allowed substitutes must be Non-Isolated PoL Modules, have a single output, operate within an input voltage range of 2.4V–5.5V, output up to 6A, and match or closely approximate output voltage and power. Mounting method, package dimensions, and compliance status must match or be compatible.

Q2: Are the substitute modules physically compatible with SLIN-06F2ALG?
A2: Substitute modules listed have comparable size and surface mount package formats within documented mechanical tolerances.

Q3: Are there differences in electrical features among substitutes?
A3: Listed parts share common features such as Remote On/Off, OCP, OTP, and enable control (Active Low). Some substitutes provide additional features such as UVLO and SCP.

Q4: Can all substitutes operate in the same environments as SLIN-06F2ALG?
A4: All listed substitutes support operating temperatures of -40°C to 85°C, consistent with the main part.

Q5: How is environmental and compliance information handled?
A5: All substitutes meet RoHS compliance. Moisture Sensitivity Level (MSL) is explicitly stated for all parts for handling and assembly considerations.

Q6: What should be checked regarding packaging and mounting?
A6: Substitute parts are specified for surface mount applications with module package formats and dimensions that match documented requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message