SLE10M-001 Equivalent & Substitute Parts

Part Overview

The SLE10M-001 is an RF transceiver gateway module from Synapse Wireless operating at 2.4GHz with 802.15.4 protocol support. This component is designed for SNAP Network applications requiring wireless mesh connectivity with RJ-45 interface connectivity. The product is currently classified as obsolete, necessitating identification of active alternative components that maintain functional and electrical compatibility for ongoing system support and new deployments.

Substiute Parts

SLE10M-001

Synapse WirelessIn Stock: 1074SLE10M-001 Datasheet

Current PartRFQ

SC012-010

Synapse WirelessIn Stock: 1109SC012-010 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLE10M-001 is based on the following critical parameters that must align across components:

• Protocol Compatibility: Both main and substitute parts must support 802.15.4 protocol
• Frequency Band: Operation at 2.4GHz is mandatory for network interoperability
• Series Alignment: Components must belong to the SNAP® Network product family
• Functional Category: Gateway functionality with transceiver capability
• Regulatory Compliance: HTSUS classification 8517.62.0090 and ECCN alignment

The SC012-010 qualifies as a manufacturer-recommended substitute based on these parameters. While the SC012-010 introduces enhanced interface options (Ethernet, MicroUSB, USB) beyond the RJ-45 interface of the SLE10M-001, it maintains core protocol, frequency, and series requirements. The SC012-010 is an active product, ensuring ongoing availability and support.

Parameter Comparison

Engineering Selection Recommendations

The SC012-010 is the manufacturer-recommended substitute for the obsolete SLE10M-001. Selection of this component is supported by:

• Product Status Alignment: The SC012-010 is an active product with current manufacturing and supply chain support, eliminating obsolescence risk
• Regulatory Compliance: Both components share identical HTSUS classification and maintain compliance within the same regulatory framework
• Protocol and Frequency Continuity: The SC012-010 maintains 802.15.4 protocol and 2.4GHz frequency operation, ensuring network compatibility
• Series Continuity: Both components are part of the SNAP® Network family, supporting system integration
• Enhanced Capabilities: The SC012-010 provides additional interface options (Ethernet, MicroUSB, USB) and specified electrical parameters (20dBm output, 100Mbps data rate, 7V-36V supply range) that extend application flexibility

Frequently Asked Questions (FAQ)

Q: Can the SC012-010 directly replace the SLE10M-001 in existing systems?

A: The SC012-010 maintains protocol, frequency, and series compatibility with the SLE10M-001. However, interface differences must be evaluated. The SLE10M-001 uses RJ-45, while the SC012-010 provides Ethernet, MicroUSB, and USB interfaces. System integration requirements must be assessed to determine if the available interfaces meet deployment needs.

Q: What is the primary reason for substitution?

A: The SLE10M-001 is classified as obsolete. The SC012-010 is an active product from the same manufacturer and series, ensuring continued availability, support, and compliance with current supply chain requirements.

Q: Are there electrical parameter differences between these components?

A: The SLE10M-001 does not specify power output, data rate, or supply voltage parameters in available documentation. The SC012-010 specifies 20dBm output power, 100Mbps maximum data rate, and 7V-36V supply voltage range. These specifications should be verified against system requirements before implementation.

Q: Do both components have the same moisture sensitivity rating?

A: Yes, both the SLE10M-001 and SC012-010 have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions for storage or handling.

Q: What packaging differences exist between these parts?

A: The SLE10M-001 packaging is not specified. The SC012-010 is supplied in box packaging. Packaging requirements for your application should be confirmed with procurement specifications.