SLB23804 Equivalent & Substitute Parts Reference

Part Overview

The APEM Inc. SLB23804 is a slide switch with a DP3T circuit, rated for 0.3A (300mA) at 125V AC and 30V DC. The component uses standard actuators, has a through hole mounting type, and is terminated with PC pins. With a part status of Obsolete, alternative models must be identified to ensure continued product manufacturing and support where this part is utilized.

Substiute Parts

SLB23804

APEM Inc.In Stock: 1025SLB23804 Datasheet

Current PartRFQ

C56313L2X

Switchcraft Inc.In Stock: 1189C56313L2X Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the slide switch category are grouped strictly based on the following allowed parameters: circuit configuration (DP3T), switch function (On-On-On), current and voltage ratings, actuator type and length, mounting and termination style, contact finish, operating temperature range, material compliance (RoHS, REACH), and part certification identifiers (ECCN, HTSUS). Only parts matching these key electrical and mechanical parameters are included as valid substitutes.

Parameter Comparison

Engineering Selection Recommendations

Substitution for the SLB23804 is driven by its obsolete status. The C56313L2X from Switchcraft Inc. is currently active and meets compliance requirements: ROHS3 Compliant, REACH Unaffected, identical ECCN and HTSUS codes. Selection can be grounded solely in matching compliance and certification fields as provided.

Frequently Asked Questions (FAQ)

Q1: What determines a valid substitute for the SLB23804 slide switch?
A1: Valid substitutes must match all supplied key parameters: circuit type, switch function, current and voltage ratings, actuator specifications, mounting and termination style, material compliance, and certification identifiers.

Q2: Can I substitute a slide switch with different electrical ratings?
A2: Only slide switches with electrical ratings and switch functions matching the explicit provided specifications are considered valid substitutes.

Q3: Does the mounting style affect substitution eligibility?
A3: Mounting type and termination style must match exactly to ensure mechanical compatibility during substitution.

Q4: Are RoHS and REACH statuses critical in substitution?
A4: Substitute options must match material compliance status as supplied: both RoHS compliance and REACH unaffected status are required.

Q5: Is packaging or series relevant for substitution?
A5: Only the explicitly listed electrical and mechanical parameters affect eligibility; packaging and series information are not selection criteria in the context of this reference.