SLB1380R5 Equivalent & Substitute Parts

Part Overview

The SLB1380R5 is a slide switch SP3T (single pole, three throw) manufactured by APEM Inc., designed for through-hole, right-angle mounting applications. This component is rated for 300mA at 125V AC and 30V DC, with an operating temperature range of -20°C to 85°C. The switch features a standard actuator with 5.00mm length and silver contact finish, suitable for On-On-On switching functions.

The SLB1380R5 is classified as obsolete. Identifying equivalent substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production or maintenance requirements for systems utilizing this component.

Substiute Parts

SLB1380R5

APEM Inc.In Stock: 1131SLB1380R5 Datasheet

Current PartRFQ

GPI-153-0000

CW IndustriesIn Stock: 694GPI-153-0000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLB1380R5 is determined by the following critical parameters:

• Circuit Configuration: Must be SP3T to maintain identical switching topology
• Switch Function: Must be On-On-On to preserve operational behavior
• Voltage Rating - AC: Must meet or exceed 125V AC
• Voltage Rating - DC: Must meet or exceed 30V DC
• Current Rating: Must meet or exceed 300mA to handle design current requirements
• Mounting Type: Must be Through Hole, Right Angle for PCB compatibility
• Termination Style: Must be PC Pin for solder connection compatibility
• Contact Finish: Silver contact finish ensures electrical performance consistency

The GPI-153-0000 manufactured by CW Industries meets these substitution criteria. This part maintains the same circuit configuration, switch function, mounting type, and termination style while providing enhanced electrical ratings and active product status.

Parameter Comparison

Engineering Selection Recommendations

The GPI-153-0000 is a suitable substitute for the obsolete SLB1380R5 based on the following factors:

• Product Status: The GPI-153-0000 is classified as Active, ensuring ongoing availability and supply chain support, whereas the SLB1380R5 is obsolete.
• Electrical Performance: The substitute part exceeds the original specifications in current rating (500mA vs. 300mA) and DC voltage rating (125V vs. 30V), providing design margin for existing applications.
• Compliance: Both parts maintain ROHS3 compliance and REACH unaffected status, meeting regulatory requirements.
• Mechanical Compatibility: Identical mounting type, termination style, and functionally equivalent actuator length (5.08mm vs. 5.00mm) ensure PCB-level compatibility without redesign.
• Operational Characteristics: Both parts maintain SP3T configuration with On-On-On switching function and silver contact finish, preserving circuit behavior.

The primary design consideration is the electrical life specification, where the original part specifies 10,000 cycles versus the substitute's 6,000 cycles. Applications requiring cycle counts exceeding 6,000 should evaluate this parameter against actual operational requirements.

Frequently Asked Questions (FAQ)

Q: Can the GPI-153-0000 be used as a direct replacement for the SLB1380R5 without PCB modification?

A: Yes. Both parts share identical mounting type (Through Hole, Right Angle), termination style (PC Pin), and circuit configuration (SP3T). The actuator length variance of 0.08mm is within functional tolerance for standard through-hole applications.

Q: What are the key electrical differences between these parts?

A: The GPI-153-0000 provides higher current capacity (500mA vs. 300mA) and DC voltage rating (125V vs. 30V). The SLB1380R5 specifies higher electrical life (10,000 cycles vs. 6,000 cycles). Applications should verify that the 6,000-cycle specification of the substitute meets operational requirements.

Q: Are both parts RoHS compliant?

A: Yes. Both the SLB1380R5 and GPI-153-0000 are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the impact of the operating temperature range difference?

A: The GPI-153-0000 operates across a wider temperature range (-10°C to 104°C) compared to the SLB1380R5 (-20°C to 85°C). For applications operating below -10°C or above 104°C, the original part specifications should be verified against actual environmental conditions.

Q: Why is the electrical life specification lower for the substitute part?

A: The GPI-153-0000 specifies 6,000 electrical cycles versus the SLB1380R5's 10,000 cycles. Applications with cycle counts below 6,000 are unaffected. For higher-cycle applications, this parameter should be evaluated against actual usage patterns to determine if the substitute meets reliability requirements.

Q: Are there packaging differences between these parts?

A: The SLB1380R5 is packaged as individual units, while the GPI-153-0000 is supplied in bulk packaging. Procurement and inventory management processes should account for this difference.