SLB13804 Equivalent & Substitute Parts

Part Overview

The SLB13804 is a slide switch manufactured by APEM Inc., configured as a single-pole triple-throw (SP3T) switch with on-on-on functionality. It is rated for 300mA at 125V AC and 30V DC, designed for through-hole mounting with PC pin termination. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and component procurement.

Substiute Parts

SLB13804

APEM Inc.In Stock: 923SLB13804 Datasheet

Current PartRFQ

1825255-7

TE Connectivity ALCOSWITCH SwitchesIn Stock: 15121825255-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the SLB13804 is based on the following critical parameters that must remain constant or compatible:

• Circuit Configuration: SP3T topology must be maintained
• Switch Function: On-on-on operation required
• Current Rating: Minimum 300mA capability
• Voltage Rating - AC: Minimum 125V AC
• Mounting Type: Through hole configuration
• Termination Style: PC pin termination
• Operating Temperature Range: -20°C to 85°C minimum
• RoHS Compliance: ROHS3 Compliant status

The substitute part 1825255-7 (TE Connectivity ALCOSWITCH Switches, MHS series) meets all critical substitution criteria. It maintains identical circuit topology, switch function, current and voltage ratings, mounting configuration, and environmental compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

The 1825255-7 is a direct functional equivalent for the obsolete SLB13804. Both components maintain ROHS3 compliance and are certified under identical regulatory frameworks (ECCN: EAR99, HTSUS: 8536.50.9050). The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

The 1825255-7 demonstrates equal or superior performance characteristics: identical electrical ratings for AC operation, matching mechanical configuration, and extended electrical life (15,000 cycles versus 10,000 cycles). The 0.5mm increase in actuator length (4.50mm versus 4.00mm) represents a minor mechanical variation that must be evaluated within the context of specific PCB layout and mechanical envelope constraints.

For applications requiring DC voltage ratings above the substitute's unspecified DC rating, the main part's 30V DC specification should be retained if available from inventory.

Frequently Asked Questions (FAQ)

Q: Can the 1825255-7 directly replace the SLB13804 in existing designs?

A: Yes, for AC applications at 125V and 300mA. Both parts share identical SP3T circuit topology, on-on-on switch function, through-hole mounting, PC pin termination, and operating temperature range. The 0.5mm actuator length difference must be verified against PCB layout constraints.

Q: What is the primary reason for substitution?

A: The SLB13804 is classified as obsolete. The 1825255-7 is an active production equivalent that ensures component availability and supply chain continuity.

Q: Are there compliance differences between the two parts?

A: No. Both parts are ROHS3 compliant and share identical regulatory classifications (ECCN: EAR99, HTSUS: 8536.50.9050).

Q: Does the substitute part meet the DC voltage requirement?

A: The 1825255-7 does not specify a DC voltage rating. The SLB13804 is rated for 30V DC. If DC operation above the AC rating is required, this parameter must be confirmed with the manufacturer before substitution.

Q: What is the difference in electrical life between the two parts?

A: The SLB13804 is rated for 10,000 electrical cycles, while the 1825255-7 is rated for 15,000 cycles. The substitute provides extended operational life.

Q: Are there packaging differences?

A: The SLB13804 is packaged as individual units (packaging not specified). The 1825255-7 is supplied in bulk packaging. Procurement quantities and handling procedures may differ accordingly.